Relays

Omron - PYF-14A Connector, relay socket.

For 4PDT relays.

Current Rating: 5A

Insulation Resistance: 1GOhm

Operationg Temp: -55C to 70C

Mount: Din track or flush (2 holes).

Terminals: 14 screw, for wire or lugs.

Dimensions: 21mm x 79mm x 30mm high.

Note: For use with: MY4 relays.

Marked PFY014A.

Rohs compliant.

Learn More

OPTO 22 - OAC15 – Solid State Relay Module, 15 VDC, Output 12-140VAC, New Old Stock The OPTO 22 - OAC15 Solid State Relay Module is a reliable and efficient control device suitable for various applications such as healthcare, industrial automation, and commercial use. With a maximum surge amperage of 50A and a current rating of 3A@45C, this relay module is designed for high performance and durability. The plug-in mounting style and compact size make it easy to install in control equipment panels, electronics, and more. The solid-state contact material ensures minimal maintenance and a long lifespan, making it a cost-effective solution for power control in a range of settings. The OAC15 output module is used for controlling or switching AC loads of 12-140 VAC. Each module provides up to 4000 volts (transient) of optical isolation between the field devices and the control logic. This module is equivalent to a single pole, single throw, normally open contact (FORM A, SPST-NO, Make). All AC output modules feature zero voltage turn-on and zero current turn-off. One Cycle Surge: 80 amps peak Peak Repetitive Voltage: 500 Volts Operating Ambient Temperature: -30 to 70 °C Isolation, Input-to-Output (Transient): 4,000 Vrms Minimum Load Current: 20 milliamps Operating Frequency: 25–65 Hz Turn-on Time: 1/2 cycle maximum-zero voltage Turn-off Time: 1/2 cycle maximum-zero current DV/DT - Off-State: 200 volts/microseconds G1 AC Digital Output, 12-140 VAC, 15 VDC Logic DV/DT - Commutating Snubbed for rated 0.5 power factor load: Output Voltage Drop Maximum Peak: 1.6 volts Off-State Leakage @ Nominal Voltage - 60 Hz: 5 milliamps rms, 2.5 milliamps RMS Applications: Typical uses and applications for AC output modules include switching the following loads: Relays, Solenoids, Motor starters, Heaters, Lamps or Indicators New Old Stock Learn More

Relay board, I/O. 16 Position/Relay Sockets. Generation 4. 16-Channel Rack with 50-pin Header and 32-pin terminal board for wires. Used/Removed from newer equipment. Learn More

OPTO 22 - 240D3 SSR NEW 3-32VDC CONTROL

Input Current: 3 A

Isolation Voltage: 4 kV

Load Current: 3 A

Max Operating Temperature: 100 °C

Max Output Current: 3 A

Max Output Voltage: 240 V

Max Supply Voltage (AC): 280 V

Min Operating Temperature: -40 °C

Min Supply Voltage (AC): 24 V

Output Voltage: 280 V

Termination: Screw

Throw Configuration: SPST

Dimensions: Depth 19.6 mm, Height 19.6 mm, Length 44.5 mm, Width 57.2 mm

Compliance: CE, CSA, UL, Lead Free: Lead Free

REACH SVHC: No SVHC, RoHS: Compliant

Learn More

7-DIP NEW RELAYS 5VDC TUBED & BULK Learn More

Omron - G7L2ATUBJCB-AC200/240 Relay, Power.

Input: AC.

Contacts: DPST NO.

Contact Ratings: 25Amp.

Coil Voltage: 200-240VAC.

Coil Current: (8.5 / 10.20mA).

Coil Resistance: 21K Ohm.

Connections: Male 1/4" QC terminals.

Mech Mtg: Panel.

Packaging: Enclosed.

Size: 1.981" long x 1.326" wide x 1.420" high plus connections.

Flange is 2.681" long with two hole mount at 2.5" centers.

Note: Factory new.

Has upper bracket with a test button.

Learn More

24VDC 4PST-10A 230-Ohm solder terminals new open frame. Learn More

Relay, power. Input: DC. Contacts: SPST. Contact Ratings: 24VDC Coil 22-1/2Amp, 120VAC (resistive) 1HP. Coil Resistance: 230 Ohm. Mech Mtg: Panel, open frame. Size: Frame 4 hole mt at 1.4" centers. Overall 1.645" long x 1.3" wide x 2.042" high. With two wire leads attached to the coil. Note: New. Learn More

OPTO 22 - ODC5Q - Relay, SSR.

The ODC5Q is a 4-channel DC digital output module used for controlling or switching DC loads of 5-60 VDC. It uses 5 VDC logic and is compatible with Opto 22 Optomux, Pamux, and Mistic protocol brain boards and mounting racks, as well as racks using a direct cable connection to a computer. This module can also be used with a Raspberry Pi, the Digital I/O Carrier Board (P/N Opto-P1-40P), and the PB16HQ mounting rack.

Quad - I/O module.

Input voltage: 5V.

Nominal line: 120VAC.

Applications: DC Relays, DC Solenoids, DC Motor Starters, DC Lamps or Indicators

More info: http://www.crydom.com/en/Products/Catalog/quad_output_modules.pdf

New Old Stock

Made in USA

Learn More

OPTO 22 - G4IDC5 Relay, I/O.

Solid state relay.

10-32VDC 5VDC logic.

Number of digital inputs: 1.

Signal input type: 10 to 32VDC.

Number of outputs: 1.

More info: http://documents.opto22.com/0253_G4_Digital_DC_Inputs_data_sheet.pdf

Learn More

OPTO 22 - 5136 MP177612677 - Relay, SSR, AC Switching.

The innovative use of room-temperature liquid epoxy encapsulation, coupled with Opto 22’s unique heat-spreader technology, are key to mass producing the world’s most reliable solid state relays.

Status: Discontinued

Input: 5V control.

Output: 10Amp 240VAC.

Connections: (4) 1/4" male QC terminals.

Mech Mtg: Chassis or PCB.

Alternates: Z240D10-7, Z240D10

New Old Stock

Learn More

OAK INDUSTRIES - WU048D2-283 - 48VDC 2 N.O. 2 N. C. Industrial Relay

Coil: 48VDC

Coil Resistance: 975-OHM 

Connections: 10 Lug Spade Socket or Quick Disconnects

Load Current: 25Amps 240VAC Resistance

1HP 120VAC, 2HP 240VAC 50/60 Hz

Hermetically Sealed Can with Grounding Stud and Mounting Plate

Genuine Vintage Oak Industries - New old Stock

Proudly Made in USA - CSA

Learn More

OAK INDUSTRIES - WU024D2R-631- DC Relays

Status: Discontinued

Coil: 24VDC

Contacts: 2 Normally Open, 2 Normally Closed Contacts

Load: 25AMPS 240VAC Resistance

1HP 120VAC, 2HP 240 VAC 50/60 HZ

Hermetically Sealed Metal Can with Ground Stud

Connections: 10 Blade Socket or Quick Disccone connectors

Genuine Vinatge Oak Industries - New Old Stock

 

 

Learn More

NOREED - 538656-580 - SPST

14.5-36VDC RELAY

2600 Ohm Normally Open.

New Old Stock

Learn More

NAIS Panasonic - DSP2A-L2-DC5V - DIP Small Polarized Power Relay

Case/Package: DIP 2 Form A

Contact Material: Gold, Silver, Tin

Number of Pins: 8

Weight: 4.5 g

Coil Current: 60 mA

Coil Power: 300 mW

Coil Resistance: 83 Ω

Coil Type: Latching, Dual Coil

Coil Voltage (DC): 5 V

Contact Current Rating: 5 A

Operating Temperature: -40 °C to 60 °C

Max Voltage Rating (AC): 250 V

Max Voltage Rating (DC): 30 V

Operate Time: 10 ms

Packaging: Bulk

Power Consumption: 300 mW

Release Time: 5 ms

Termination: PC Pin

Throw Configuration: DPST

Voltage Rating (AC): 250 V

Voltage Rating (DC): 30 V

Dimensions: Depth 11 mm, Height 10.5 mm, Length 20.2 mm, Width 11 mm

Made in Japan

Learn More

Panasonic NAIS Aromat - JS1-12V Relay, power.

Input: DC.

Contacts: SPST.

Contact Ratings: 10 Amp.

Coil Voltage: 12VDC.

Mech Mtg: PCB through hole.

Packaging: sealed.

Size: 0.625 x 0.86 x 0.64" above board.

Note: Listed: UL CSA TUV VDE.

Alternate: TE Connectivity 1-1721150-3

Learn More

Panasonic / NAIS /Aromat - ST1-DC24V - Relay, Control.

Input: DC.

Contacts: SPST.

Contact Ratings: 8Amp.

Coil Voltage: 24VDC.

Mech Mtg: PCB Dip.

Size: 1.220" wide x 0.55" deep x 0.551" high.

Note: Listed: UL/CSA.

Made in Japan

Learn More

NAIS/Aromat - HP33-DC24V - Relay, Power.

Input: DC.

Contacts: 3PDT.

Contact Ratings: 10Amp.

Coil Voltage: 24VDC (1/3HP 125, 250VAC).

Connections: Male 3/16" QC terminals, or plug in.

Packaging: Plastic enclosed.

Note: Listed: UL/CSA.

Used/Removed from equipment.

Learn More

Relay, control. Input: DC. Contacts: 4PDT. Contact Ratings: single coil. Coil Voltage: 5VDC. Mech Mtg: PCB. Packaging: 14 Dip, plastic enclosed. Learn More

Relay, power. Input: DC. Contacts: 4PDT. Contact Ratings: 2Amp. Coil Voltage: 24VDC (2A 1/20HP 125, 250VAC, 2A 30VDC). Connections: 14 PC pins. Mech Mtg: PCB. Packaging: Enclosed. Note: New. Amber case. Listed: UL/CSA. Nais/Aromat/Matsushita. Learn More

Relay, control. Input: DC. Contacts: 4PDT. Contact Ratings: 3Amp. Coil Voltage: 24VDC (3A @ 28VDC, 120VAC 1/10HP, 120VAC, 240VAC). Coil Resistance: 620 Ohm. Connections: solder terminals. Mech Mtg: PCB plastic enclosed ice cube. Learn More

TE Connectivity Midtex/Aemco - 496-14B300 Relay, Power.

Status: Discontinued

Input: DC.

Contacts: SPST NO.

Coil Voltage: 12VDC.

Coil Current: 10Amp.

Connections: PC pins.

Enclosure: Sealed

Contacts: Silver Cadmium

Mech Mtg: PCB, 4 Pin.

Size: 21.4mm long x 15.8mm wide x 16.2mm high.

Note: 10Amp, 28VDC/120VAC, 1/4HP 120VAC.

Listed: UL/CSA.

Alternates: TE Connectivity, Advanced Control Electronics Solutions

Learn More

TE Connectivity - MIDTEX - 157-22T300 Power Relay

The Type 157 relay is a general purpose rugged power driver offering superior 3/16” through air and 3/8” over-surface spacing.

Status: Discontinued

120VAC DPDT-15A

Coil Resistance: 2250 Ohms 

Ssocket  w/Quick Connect (QC) Terminals

Green Polycarbonate Dust Cover

Factory New Old Stock

Learn More

Relay, Time Delay. Input: 24 VDC. Contacts: DPDT. Contact Ratings: 10A/28VDC/120VAC. Coil Voltage: 24VDC. Coil Current: 50mA. Connections: 8-pin Octal; Mech Mtg: plug-in. Packaging: Plastic, openable. Size: 2" x 2" x 3-1/2". Weight: 2 oz. Timing Function: On-Delay. Timing Interval: 2 seconds. Note: Base pinouts are non-standard and incompatible with most octal plug in's wiring. Learn More