Relays

GRAYHILL - 70-OAC5  - I/O Module

2.5-10VDC Logic

140VAC 3.5Am

Standard, Digital Output AC,

VDC logic

SPST Normally Open

Zero crossing turn on

Used, Removed from Equipment

 

Learn More

GORDOS/CROUZET - M-IDC5N - Relay, SSR, I/O Module.

In:10~48VAC/DC

Switch:50mA 30VDC

"N"=Noise Immunity per NEMA ICS 2-230

Plug into Mounting Boards for thinner 0.6" Modules

UL Recognized (E46203) / CSA Certified (38595)

http://www.crouzet-usa.com/catalog/gordos/standard_input.pdf

New Old Stock

Proudly Made in USA

Learn More

HAMLIN - HE721B6143 - Relay, Reed.

Input: SPST NC.

Coil Voltage: 24VDC.

Coil Resistance: 2150 Ohm with diode.

Connections: 8 Dip.

Mech Mtg: PCB.

Hamlin is now a Littelfuse company.

Learn More

GRAYHILL - 70S2-01-A-05S - Relay, SSR.

Relay SSR 40mA 15V DC-IN 5A 60V DC-OUT 4-Pin

Input: DC. Contacts: SPST-NO.

Control: 3-15VDC.

Operating voltage: 3-60VDC.

Coil current: 5Amp.

Connections: screw.

Mech Mtg: Mount flange 2.2" (55.9mm) long, with 1.864" centers.

Size: 1.225" long x 1.019" wide x 0.860" high.

Note: Zero crossing.

Complete with hardware.

Rohs compliant.

Learn More

Relay, SSR. 25Amp 120/280VAC. Zero turn on/Zero turn off. Input: 3-32VDC control. Case: Industry standard 2.25" x 1.75" x 1/3" high with screw terminals or 3/16" QC terminals 1/4" QC load. New. Note: Double marked 709W22204. Learn More

GORDOS/CROUZET - F81-1087 - 5VDC SPDT

PCB Mount Molded Relays 8-Dip.

Dimensions: 19mm long x 6.5mm wide.

Body is: 6.6mm above board

Manuf tubed.

Learn More

9-15V SPST-1Amp NO 4-Pin Dip Relays Learn More

Relay, TDR. NO 26.5V, 3Amp to 250V res, 1Amp to 32VDC res. 15 Second. Hermetically sealed case. TDR G-V Thermal. Connections: solder hook. Learn More

General Electric - CR120PR120A22AA

120VAC Reed Relay

1 NO-1 NC Contacts

Stud Mount

Neon Indicator Light

Proudly Made in USA

Removed From Equipment/Used

Learn More

6-DIP 12VDC RELAY Learn More

General Electric - 3SBV5004C1 - DPDT 2A or Logic 12VDC Half Crystal Can

long Life Industrial Relay

Coil Voltage: 12 VDC

Coil Resistance: 225-Ohms

Contact Current: 2A

Connection: 8 Pin Dip

hermetically Sealed Shielded Can

Dimensions: 0.85" X 0.44" X 0.48" High

Genuine Vintage General Electric - New Old Stock.

Made in USA

 

Learn More

ESSEX - 93-312090-21000A - Relay, Power.

Status: Discontinued

Input: 24 AC, 60Hz.

Contacts: SPST NO.

Contact Ratings: 5Amp.

Coil Voltage: 24VAC 60Hz (3Amp 250VAC 60Hz).

Coil Resistance: 80 Ohm.

Connections: Male 3/16" Quick Connect (QC) terminals.

Mech Mtg: Panel, mounts with one hole 1.6" from locating pin.

Packaging: Open frame.

Size: 1.23" x 2" x 1.25" high.

Vintage Essex - New Old Stock

Learn More

EAGLE SIGNAL / DANAHER - NL230L1 - Analog Input Module

1-5 VDC  for EPTAK 200OLD

Connections: 1 Quick Connect, Socket or Solder

Made in USA - New Old Stock

 

Learn More

Relay, control. Input: AC. Contacts: 1PDT. Contact Ratings: 5Amp. Coil Voltage: 120VAC. Connections: 8 Octal. Packaging: Enclosed. Note: (5Amp 28VDC, 250VAC; 1/10HP 125VA 125VAC; 1/4HP 240VA, 250VAC). Learn More

Hermetically sealed 5-terminal ELECTRO-MECHANICAL probably a motor and cam inside the can. Three mounting screws out bottom. 3"x1.5"x1.4" Learn More

ELECTRONIC CORPORATION AMERICA, ECA - NO. 8-591 

Solid State Low Leakage Relay 0-30MA,

0-120V, AC OR DC 

Note: For Use with Type 42MTB Photoswitch Terminal Bases

NSN: 5945-01-232-5447

Alternate: CA0509-005

New Old Stock

Proudly Made in USA

Learn More

EIA - 701-216S - Relay, DC. Coil Voltage / Resistance / Current: 24VDC / 900 Ohm / 28mA. Electrical Configuration: SPST. Mech: PCB. Body: 0.975 x 0.7 x 0.8". Weight: 0.5 oz. Crossbar contacts. Removable Plastic cover. Alternate: R-A028, EIA 1077 (120-0001-000). Package of 10. Learn More

3 pole 30/50HP 120V/60Hz-Coil, used guuaranteed Learn More

CURTIS / ALLRIGHT - SW200-19-110CO - 110 Volt High Amperage Solenoid

The SW200 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.  Developed for both interrupted and uninterrupted loads, the SW200 is suitable for switching Resistive, Capacitive and Inductive loads. The SW200 features single pole single throw, double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The SW200 has M10 stud main terminals and 6.3mm spade coil connections.  It can be mounted via M5 tapped holes or mounting brackets – either supplied fitted, or as separate items.  Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards. 

Coil:110VDC 

Current Rating: 250A or 400A, Single Pole Single Throw (SPST), Normally Open

Contacts: 4.7mm apart,

Normally Open - very large - 73mm x 60mm x 154mm

Made in England

Additional Information: https://www.albrightinternational.com/products/sw200/

 

 

 

Learn More

Relay, SSR. Input: DC. Contact Ratings: Control: 9-18VDC. Output: 1Amp 5-200VDC. Connections: PC leads. Mech Mtg: Plug-in. Packaging: Enclosed, plastic. Note: Mini I/O Module. Learn More

CUTLER-HAMMER - 9560H821A – Model 6-172-8 - AC Magnetic Contactor, Status: Discontinued Coil Voltage: 208/240VAC 50/60 CY 3 Phase # Pole, 1 Phase 2 Pole Contacts: 3PST-60A FLA Contactor Max. AC Rating Resistance: 75 A 600 Volts Carrier No. HN53AF100 Made in USA New Old Stock - Rare Learn More

Reed Relays - 24VDC COIL Shielded 8-pins New-tubed Form 2C 1550-Ohm Coil Resistance 8-Dip 1-1/8" L x 5/8" deep x 5/16" high. Learn More

Mercury wetted reed relays sealed - New printed circuit board mount 0.63 x 2.1 x 0.63" above board -=- 5-Pin HS series Form C Bistable 650-ohm coil Vertical-mount Learn More

Relay, dip. 5V. Mount: PCB, 4 pin. Dimensions: 28.7mm wide x 10mm deep x 8.5 high.

Learn More