Relays

Relay, SSR. Load: 480VAC 15Amp. Package: module/hockey puck. Suggested input variable resistors (not included): R05-10-15-25-40A - 150K 1 watt. R05-10-15-25-40B - 1Meg 1/4 watt. R05-10-15-25-40D - 1Meg 1/4 watt. Learn More

Relay, DC/DC Input Converter. Dimensions: 1.285" square x 0.50: high max, with 5 solid leads. Learn More

Douglas Randall - 12HV1A-100 - HC Reed Relay, SPST.

Douglas Randall Type Hv Reed Relay Spno 10KV 12V Coil

Status: Discontinued

SP NO 12V 3Amp.

Maximum Switching Voltage: 10KV.

Coil Type: Non-Latching

Resistance: 100 Ohm.

Dissipation: 50 Watt.

Operating Temperature: -20 to 70 Deg C.

Dimensions: 2.13" long x 1.145" wide x 1.262" high.

Termination: Solder Turret

Mount Panel, centers - 2 hole, 2.102".

Note: High Voltage.

New Old Stock

Made in USA

Complete with specification sheet available.

Learn More

ELECTROL - R4422-2 Relay, reed.

Input: DC.

Contacts: SPDT.

Coil Voltage: 12VDC. 10VA.

Connections: 6 PC leads.

Mech Mtg: PCB.

Packaging: 28.5mm long x 11.2mm wide x 8.7mm above board.

Learn More

36PDT New T-BAR Relays, 2-Poles are damaged. Sorry. Learn More

Relay, coaxial. 1P 16 Position. Female BNC (17) and one DB25 male connector. Shielded case. Mount: Panel, 4 holes with 4.4" centers. Dimensions: mount flange 3.632" square. Unit overall 2.5" high. Learn More

SPDT 24VDC 300 OHM REED RELAY Learn More

Relay, DC. Shielded Reed Relay. 12VDC SPST-N.Open-1Amp . 500-Ohm coil. Learn More

75 Second TDR Normally Open 3AMP 150VDC 3 AMP 250 VAC MODEL 501 Glass Tube 8-pin octal plug-in Learn More

PhotoMOS SurfaceMount - Solid State Relay - Output Type Dual-B - Current Rating 200 Milliampere Learn More

Contactor. Input: AC. Contacts: 8P NO (0 NC). Contact Ratings: 10Amp. Coil Voltage: 120VAC 60Hz (Pilot duty 600VAC max). (Pilot duty 1.1Amp 120VDC, 0.2Amp 240VDC). Mech Mtg: Panel, with two holes at 3" centers. Size: 3.512" long x 2.390" wide x 5" high. Note: Type M. No D26MD series A2 front deck attachment, D26MPF front poles marked F. (D26MB/D26MPR/D26MPL/D26MPS). Listed UL/CSA. UPC 78-2113-18111. Made in the USA. New, individually packaged. Learn More

4-Pin Dip High Voltage - Isolation Relay New Mfg's Tube Learn More

Relay, SSR. Input: DC. Contact Ratings: 20Amp. Coil Voltage: 36-530VAC. Connections: male 1/4" QC terminals. Mech Mtg: Panel, with two holes at 2.250" centers. Size: 1.832" long x1.503" wide x 0.563" high, plus connections. Overall with mount 2.632" long. Note: GZ Series. Input: 4-15VDC. Listed: UL/CSA. For max rating use 1 Deg C/W heatsink. Factory new, each NIB. More info: http://datasheet.octopart.com/84132010-Crydom-datasheet-13068463.pdf Learn More

Relay, SSR. Input: DC. Contact Ratings: 20Amp. Coil Voltage: 36-280VAC. Connections: male 1/4" QC terminals. Mech Mtg: Panel, with two holes at 2.250" centers. Size: 1.832" long x1.503" wide x 0.563" high, plus connections. Overall with mount 2.632" long. Note: Range: GZ Series. Input: 4-15VDC. Listed: UL/CSA. For max rating use 1 Deg C/W heatsink. Factory new, each NIB. More info: http://datasheet.octopart.com/84132010-Crydom-datasheet-13068463.pdf Learn More

5V Reed Relay SIP Dry with Clamp Diode SPST NO Contacts 5V 380-ohm coil Learn More

Relay, SSR, AC. Contacts: SPST, NO. Coil Current: 25Amp. Mech Mtg: chassis. Packaging: screw terminals. Note: Load: 24-140VAC-25A. Control In: 3-32VDC, 5VDC 4mA. Rohs compliant. Learn More

Contactor, coil. 208-240VAC. Learn More

Curtis / Albright - SW180-20-110CO Contactor.

The SW180 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.  Developed for both interrupted and uninterrupted loads, the SW180 is suitable for switching Resistive, Capacitive and Inductive loads. The SW180 features single pole single throw, double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The SW180 has M8 stud main terminals and 6.3mm spade coil connections.

Input: DC.

Contacts: SPST NO Double-make.

Contact Ratings: 180A/200VDC.

Coil Voltage: 110VDC.

Coil Current: 100mA.

Coil Resistance: 1100 ohms.

Contacts: Silver Oxide

Pickup/Dropout: 60V/22V.

Connections: M8 studs on contacts, 6mm spades on coil connections.

Mech Mtg: 4 tapped M5 x 0.8 holes on each side of coil housing.

Packaging: open frame.

Mechanical Durability: >5,000,000 Cycles

Size: 61mm x 44mm x 122mm tall.

Note: More info: https://www.albrightinternational.com/products/sw180/

Made in England

Learn More

Relay, power. Input: DC. Contacts: 3PST. Coil Voltage: 28VDC/25Amp, 115/200VAC NO, plus another two sets of contacts on top, one NO and one NC, probably 10Amp. Packaging: Hermetically sealed enamel case. Note: Class B. Used/RFE/Removed from equipment. Learn More

Relay, solid state. Contactor: 80-530VAC 90A. Coil: 3-32VDC 4mA at 5VDC. Connection: Screw terminals. Electrical conf: SPST NO. Mech: Hole and slot 1.75" spacing. Body: 1.80 x 2.3 x 0.95"H. Weight: 5 oz. SCR AC switch zero-voltage turn-on. VDE CSA CE. More info: http://www.crydom.com/en/Products/Catalog/h_a48.pdf Learn More

Relay, SSR. Input: DC. Contact Ratings: 25Amp. Note: Control 3-32VDC, Oper 48-530V. Relay module. More info: http://www.crydom.com/en/Products/Catalog/h_a48.pdf Learn More

Contact kit for MD810, 1 Pole (SP) 1350Amp, with 2 large contacts and 1 large spring. Learn More

Contactor, block. 1 NO 1 NC 10Amp, Series A4. Learn More

Relay hardware. Hold down spring for CH D5 relays. Learn More