Relays

Relay, reed. Coil Voltage: 5 VDC. Switching Current : 0.25 Amps. Switching Voltage: 125 Volts. Mounting : PC Board. Learn More

Relay, control. Input: DC. Contacts: DPDT. Contact Ratings: 0.25mA AC, 1Amp DC. Coil Voltage: 12VDC. Coil Resistance: 390 Ohm. Mech Mtg: PCB, TO-39-8 metal can long leads. Note: Military electromagnetic. Learn More

Relay, DC. SPDT 12VDC. Mercury wetted. Vertical=Upright operating position only. Learn More

SPDT with two windings on coil - Mercury Wetted Relay; 8 pin octal base Figure S3 Learn More

SPDT - Mercury Wetted Relay; 8 pin octal base - High Speed Figure S1 in their old catalog Learn More

Relay, mercury. 4PDT Mercury wetted-contact. Case: 14 Pin round plug-in base, 3 threaded stand-off mount. Hermetically sealed. Learn More

C.P. Clare & Co - HG1063 - Mercury-wetted Contact Relay

SPDT with Make-Before-Break Contacts.

8-Pin Octal Metal Plug-in - Sealed Relay

New Old Stock

Learn More

Voltsensor Controller. Bistable trip with one adjustable setpoint / Voltage sensitive relay driver / solid state meter relay substitute - Precision DC voltage comparator - gold module with one set point - Output to 80% of supply voltage, up to 50mA, - trip point range +/-0.5VDC Stability <20uV/degC - Input Z >10Megohms - hysteresis <100uV - Sensitivity & Repeatability <50uV - Power Required +/-12 to +/-25VDC. Mount: PCB, 9 pin, gold. Dimensions: 1.5" square x 0.70" high. Learn More

obsolete VOLTSENSOR / Bistable trip with adjustable setpoint / Voltage sensitive relay driver / solid state meter relay subsitute - Precision DC voltage comparator - gold module with set point - outputs - output level to 80% of supply, to 50mA - trip point range 95% of supply voltage <1mV/decC - Input Z 100Kohms - VOLT SENSOR 1-525-2 9-gold pins on bottom of 1.5" square module Learn More

Panasonic AROMAT - TF2E-L-H-24V, DPDT

Status: Discontinued

Coil Volts: 24VDC

Coil Power: 140mW

Coil Resistance: 2880 Ohms

Ultra Small DIP

Highly Sensitive: 80 mW Nominal Operating Power

Single Sided 3/12 V Type 

Latching Relay

Surge voltage withstand: 1500 V FCC Part 68

Minimal magnetic interference allows high density mounting

Sealed construction allows automatic cleaning

PCB Mount Relay - Fits Standard 14 pin DIP IC Socket

UL/CSA Listed

New 10-DIP

Made in Japan

Learn More

Timer. Delay on make. 30VDC 2Amp. Delay: 400ms. Package: axial leads. Dimensions: 0.761" D x 1.997" high. Learn More

ARCO SIEMENS - V23154-Z1034 - Relay, hardware. Wire hold-down. Alt. 1393760-2. Package of 10 Relay, Hardware. Clip/Wire hold-down spring for relay and sockets. Approximately 1.4" wide x 1.2" high. For Cradle relays N, S and P Size III. Made in Germany Alternate: Amp Inc/Tyco 1393760-2. Package of 10. Learn More

Automation Direct - D4-16TR Relay Module. Developed for the DirectLogic 405 series, this module interfaces with DL405 programmable logic controllers as well as external peripheral devices. 16-point, 6-24 VDC/6-240 VAC, (16) Form A, 2 isolated common(s), 8 point(s) per common, 1A/point, 5A/common. 5-250VAC 1A 50/60HZ 5-30VDC Used/Removed from Equipment. Learn More

Contactor. Input: AC. Contacts: 2P. Contact Ratings: 25Amp (Res per pole 25Amp 600VAC)(20Amp IND). Coil Voltage: 24VAC . Connections: Screw and 1/4" male QC terminals. Packaging: open frame. Size: 2.3" long (max) x 2.51" wide, plus all connections x 2.662" high. Mount flange is 2.005" long x 2.644" wide with 4 holes at 2.622" centers. Learn More

Contactor. 4P NO 30Amp 208-240VAC. Learn More

RELAY SOCKET 20 PIN (F) round chassis mount Learn More

AMPERITE - 115C15 Relay, Thermal Timer.

Input: 115V AC/DC.

Contacts: SPST-NC.

Contact Ratings: 3A/125VAC.

Coil Voltage: 115V AC/DC.

Coil Current: 2W.

Connections: 8-pin octal plug.

Mech Mtg: 8-pin glass tube. Size: 1.25"D x 2.75"H above socket.

Weight: 0.5 lb.

Timing Range: 15 seconds.

Note: Hermetically sealed, heater-actuated.

Proudly Made in USA

Learn More

AMPERITE - 115C300 - Electron Tube, Relay, Time Delay. 115V AC/DC. SPST-NC-3A Octal

Input: 115V AC/DC.

Contacts: SPST-NC.

Contact Ratings: 3A/125VAC.

Coil Voltage: 115V AC/DC.

Coil Current: 2W.

Connections: 8-pin octal plug.

Mech Mtg: 8-pin glass tube.

Size: 1.25"D x 2.75"H above socket.

Weight: 0.5 lb.

Timing Range: 300 seconds.

Note: Hermetically sealed, heater-actuated.

New Old Stock

Learn More

Allen Bradley - AB - 800T-XD2  Auxiliary Contact Block.

Contact blocks are packaged in kit form for field installation. All necessary mounting hardware is provided with each contact block kit.

Contact Block, 30 mm, Base Mount, Non-metallic, 1 Normally Closed, Shallow

Rockwell Automation

Shallow Box 1 NC

10AMP 600VAC.

UPC:662073466468

Learn More

relay DPDT hermetically sealed 390-ohm coil=24vdcMARKED 26.5V Learn More

Power Terminal Block 600V 115Amp forBulletin 1492 Learn More

One Normally-Closed and One-Normally-Open 10Amp contacts - OFF-DELAY Pneumatic Timer 0.2 - 60 Seconds 120V-60Hz screwdriver-adjust from top - 4.77"high x 2.52" x 3.27" - New in old box, with spec sheet - Mfg in Japan Learn More

Relay, power. Input: AC. Contacts: 3PDT. Contact Ratings: 10Amp. Coil Voltage: 120VAC. Connections: 11 Octal. Mech Mtg: Plug-in. Packaging: Plastic enclosed. Note: Series A. Listed: UL/CSA. Used/Removed from equipment. Learn More

ALLEN BRADLEY - AB - 500-B0D930 SERIES B - 120VAC COIL 3PST Non-Reversing Contactor 27A 3P 120/110V 

120VAC 60HZ OR 110VAC 50HZ COIL 3PST N/O WITH ONE STANDARD N/O AUX CONTACT

UNIT IS 1 PH 2 POLE 2HP 115VAC OR P PH. 7 1/2HP 230VAC OR P PH 10HP 460-575VAC 27AMP MAX 600VAC MAX

Used/Removed From Equipment

Learn More