Specialized

BEMAN - MP-6 Resistor, Ceramic.

Resistance: Precision 1090Meg Ohm.

Power: 6 Watt.

Tolerance: 2%.

Voltage: 30KV. Glass-like. Spiral Wound. Precision.

Dimensions: 5/16" D x 6" long.

Alternates: Heath Kit P/N 2-47, RCA WG-206, BE1090

New Old Stock

Additional Information: https://www.utm.edu/staff/leeb/Probe.pdf

Application: Fits Heathkit Model 336 and RCA WG-289 or WG-297 High Voltage Probes and others.

Note: Handle the 1090 resistor with care, very fragile.

Learn More

Coaxial attenuator, 10dB 25 watt. DC-4GHZ 50 Ohm. "N" male to "N" female connectors. Dimensions: 0.994" (25.2mm) D x 5.357" (136.0mm) long. Learn More

BIRD - 5-1357-3 Connector, Electronic Solder Eyelet, Rivet/Eyelet/Terminal.

Electronic eyelets are flanged tubular metal conductors inserted into a printed circuit board. They make electrical continuity between the circuitry on both sides of the board, and are an attachment point for soldering component leads.

Type: Solder.

Appears to be Silver Plated Brass (High thermal and electrical conductivity)

Metric Dimensions: Outside lip is 6.1mm OD, 2.9mm ID with a shaft 3.5mm round and 6.7mm tall under Lip.

Inch Dimensions: Outside lip is 0.240" OD, 0.114" ID with a shaft 0.138" round and 0.264" tall under Lip.

Applications: Secure High Current Electrical and Ground Connections or repairs to chassis and PWBs.

Chose the proper eyelet keeping the following in mind:
LUF The length of the eyelet barrel under the flange should be 0.020-0.035”/0.630-0.890mm greater than the thickness of PCB(this allows the for the right length after the flange is formed)
ID Eyelet inside diameter should be 0.003-0.020”/0.075-0.500mm greater than the component lead diameter for proper fit of  the eyelet through-hole component lead.
FD The flange diameter should be sized so that it does not protrude out onto other pads or conductors in the vicinity
OD The clearance in the PCB hole should allow the eyelet to be inserted without undue force but, but should not exceed 0.125mm greater than the eyelet outside diameter.

Additional Information: http://www.intl-eyelets.com/short_course_on_electronic_eyelets.htm

Genuine Vintage Bird Electronics Hardware - New Old Stock

Package of 100.

Learn More

Beautiful Military Hermetically Sealed 22-Flatpack Hybrid Negative Temp, Actually Marked Lockheed Martin 6086451-7 and Beckman 165-1423-1 NEG TCV. NSN 5962-01-099-9214 Learn More

BAUSCH & LOMB OPTICAL - 9-138 - 18" Optical Ellipse Scan Mirrors An "Ellipse Scan Mirror" refers to a type of optical mirror with a reflective surface shaped like an ellipse, designed to precisely direct and focus light by utilizing the unique property of an ellipse where all light rays originating from one focal point converge at the other focal point, making it ideal for scanning applications where precise light direction and focusing are crucial; essentially, it's a scanning mirror with an elliptical reflective surface. Dimensions: 18" x 5” Ellipse Scan Mirror Highly reflective on both concave as well as convex sides. High Quality / High Reflectivity of 99.5% or More. Serialized Functional Specification Sheets as Pictured are Available Very Fragile - Partial Transmission Applications: Science projects, telescopes, laser systems, solar concentrators, optical microscopes, fiber optic coupling, stage lighting, and certain types of projectors including medial imaging. Made for IBM - Made in USA Learn More

ARZEL TECH. - 8-357 – Magnetic Sheets, 6” X 6" SQ. X 30 Mil, 10 Pieces Per Roll. Magnetic Sheets - Perfect for covering air vents where you don't want Hot or Cold air blowing into an unused room. Very flexible, not magnetically strong but fine for steel grates and playing around with steel fillings. Helps Save Energy – Can be painted to match the cover of your walls – Flush Mount. Block floor, wall and/or ceiling metal vents. Thermal Magnetic vent Covers can be drilled, shaped, or cut to fit corners and contours. Dimensions: 6" x 6" x 0.03" Color: Grey and Brown Thickness: Heavy 30 Mil - 0.03" (0.762mm) material. New Old Stock Sold 10 PER ROLL Learn More

ALNiCo - 71C825 - 122293M - Magnets, Neodymium - Super Strong Commercial Rare Earth Magnet.

Rare earth magnets are very strong magnets made from alloys of rare earth elements. They are the strongest among the permanent magnets made. These magnets can be manufactured through sintering, compression bonding, injection molding, and extrusion. Neodymium magnets have the highest energy product of any material, and this type of magnet is known for its ability to be created in a wide range of available shapes, sizes, and grades. 

Dimensions: 0.856" (21.7mm) at the widest area x 0.654" (16.6mm) tall x 0.143" 93.6mm) thick.

Applications: Magnetic Separators, Wind Turbines, Linear actuators, Microphone assemblies, Servo motors, Tape recorders, Alternators, Pacemakers, DC motors, Flow meters, Holding Assemblies, Lifting Magnets, Magnetic Fanners.

Extreme caution must be taken when working with rare earth magnets. Magnets larger than a few centimeters are strong enough to cause injuries to body parts pinched between two magnets, or a magnet and a metal surface, even causing broken bones. Magnets allowed to get too close to each other can strike one another with force to chip and shatter the brittle material, and the flying chips can cause injuries.

Learn More

Aerotec - UD-122 - AF33 (600)-24272 Differential Pressure Switch A pressure switch compares the pressure acting on the area of a piston or diaphragm against an opposing spring force. Sometimes the opposing force is the buckling force of a thin disk. A differential pressure switch compares two different pressures acting on opposite sides of the same piston or diaphragm. Differential Pressure Switch AF33 (600)-24272 Military S/N 1204.16-R 3360 - 072834531 AF33 (600)-24272 Packaged: MIL-B131B Class 2 Factory - New Old Stock Made in USA Learn More

24-Channels = 3 rows of 48 phone jacks on standard 19" rack panel only 1.75" tall. Removed from telephone comm cabinet. Excellent condition, precious metal contacts. Has A GROSS (144) Wire-Wrap connectors in rear, with wires wrapped.(See also 5215B-22 for ones with 4 Amphenol 157-72500-3 50-pin jacks) Learn More

Diode, assembly. 150,000V 220mA. Dimensions: approximately 1" D x 10" long. Large brass cathode & anode connections. Reverse current at 175KV is 2 MicroAmps. Forward Voltage Drop at 50mA is 165Vmax. Picker T80L-18 19 x Varo H468-9. Learn More

Belkin - R6G088-10 - Cat 5e/Cat6 RJ45 Male Plug 8 Position. Package of 10

RJ45 Plug is for round cable, featuring gold plated contacts. 

50 Micron gold plated contacts for optimum data transmission.

RJ45 8 Pins Network Cable Heads / Plugs

For use with Stranded/Solid Cat5/Cat5e cables

Gold plated leads for better data transmitting and higher signal strength

New Quality Belkin OEM Original 

Color: ICE Transparent

UPC 0722868105184, 722868105351

Package of 10 Connectors.

Discounted further for Package of 100 (R6G088-R-100)

Learn More

Amazon Basics - E119932-T - DVI-D Dual Link to DVI Monitor Adapter Cable - 9.8 Feet (3 Meters)

Gold plated DVI-D Dual Link to DVI (24+1) connector for optimal conductivity

High speed transmission rates up to 9.9 GBPS

Max. Resolutions up to 2560X1600

Includes ferrites to prevent signal loss

Connector Type: DVI-D, Cable Type: DVI

Color: Black

Applications: Connect your DVI equipped device to flat panel displays, digital CRT displays, projectors, HDTV and Video Projectors, including DFP and LCD types.

Learn More

Western Electric - 723A Telecom. Telephone Receiver Earpiece.

For operator's headsets.

Vintage Molded Bakelite

Size: 2.25" D x 1.25" and has two mounting holes on either side of black WE plastic.

Accepts two wires or lugs to gold terminals inside the replaceable 4IN81 Element.

Learn More

Western Electric - 464A - Dual 2-Conductor Phone Switchgear Plug 

1 per Bag.

Material: Heavy Duty Solid Brass.

Screw Terminals - Brass "T" Cable Clamp.

Authentic Vintage Western Electric - New Old stock

Complete with hardware.

Learn More

Western Electric - L4BY-03-10C - Telecom.

Telephone system, stretch phone patch cord with WE-464A dual 1/4" plugs and 8' coiled stretch cord to WE-240A belt clip with locking switch with another 3' cord with four conductors, black.

Genuine Vintage Western Electric - New Old Stock

No phone or headset included.

Learn More

Western Electric - 440-201 Telephone Earpiece Receiver.

Magnetic Low Impedance (Low-Z).

Genuine (WE) Western Electric Vintage Replacement for Handsets.

Dimensions: 52mm D x 20mm deep with two screw terminals.

Color: Black Bakelite.

Genuine Vintage Western Electric Earpiece - New Old Stock.

Dimensions: 2.044" Diameter x 0.78 Depth, Inner Diameter Tapers down to 1.37" 

Connections: 2 Compression Screws

Mounting" Possibly by 2 Small Holes Approximately 0.085" Diameter 180 Degrees Across (See Picture 4).

Made in USA

Learn More

Western Electric - 2-Y - SWBD - Panel / Switchboard Lamp

Slide Base Indicator Lamp, Carbon Filament

Miniature Telephone Light Bulb

Voltage/Current: 48V, 30-42mA

Lamp Diameter: 0.3075"

Used with Nos. 12, 13, 30, 34, 49, 50 or similar type lamp sockets

Genuine Western Electric - Factory Vintage New Old Stock

Made in USA

Priced per Bulb

Learn More

Transformer, telephone. Similar to a Ferrite inductor. Mount: PCB 9 leads. No housing. Dimensions: 1.111" long x 0.656" wide x 1.010" above board. Note: New older stock. Learn More

Western Electric - 241A Switchgear Connector.

Dual Mono Male Plugs, 1/4" (6.35mm) 

Material: Heavy Duty Solid Brass.

Screw Terminals - Brass "T" Cable Clamp.

Authentic Vintage Western Electric - New Old stock

Alternate: 100395235

Complete with hardware.

Learn More

INDUCTOR (10 TER. ON BOTTOM) Learn More

Connector, D-Sub. DB25 female to KJ8 phone jack. Complete with plastic hood. Learn More

Unidentified MFG - RJ12 - RJ 12 Right Angle, 6P6C, Female Network Modular/ Telephone/ Computer Jack

Gender: Female Jack, Cable to Board

Contacts: 6 Position (6P/6C)

Lan Category: CAT3

Contacts: Gold Plated

Housing Material: Polymide (PA), Nylon Glass Filled

Connection Termination: Solder

Temperature: -40 C to 85 C Thermoplastic

Alternate: Molex 95501-2661, Amphenol ICC RJE0166001, TE Connectivity 5569026-1Uxcell RJ12

Note: Manufacture Packaged in Trays of 100

 

Learn More

SPH388 - SPH386 - IEC 320 C14 Male to IEC 320 C13 Female Power Jumper Extension Cable Cord 9 Ft.

This high quality UL Rated Cable that plugs between a PDU and Computer is the backbone of any Data Center or Network.

IEC320 C14 Male Plug to IEC320 C13 Female Receptacle Power Cord

10 Amp Black 9Ft

IEC Computer monitor extension cord 10Amp, shielded 18-3C (18AWG 3 Conductor).

Jacket: SJT CSA.

One Molded Female to one Molded Male.

Length: 9 Foot Black.

Applications: Monitors, Computers, Commercial/Industrial Test Equipment & Computers.

Note: Will mate our female connector P/N 43R03 SKU 4821, sold separately.

Learn More

VDS II KEYSET SEC-55-2 Keypad.

VDS II Keyset.

Telephone keypad with 41 switches.

Fifteen (15) top keys are illuminated/LEDs.

Next section is a standard 16 key DTMF keypad.

The nest section has 10 keys, illuminated with legends.

Two flat flexible ribbon cables, 14 and 16 conductors.

Dimensions: 4" x 8". Note: SEC-55-2 keypad.

Learn More