Hardware

Altec - 1653-1L-40905 Hardware, Fluted Knob.

Indicating and Fluted, 7 Points.

Shaft Type: Circular

For 0.25" (6mm) Shaft, with one Set Screw.

Dimensions: Approximately 1.23" Diameter with Skirt 1.5" OD (38mm).

Skirt is 0.68" Tall (17,25mm).

Black with Silver Tone Top Cap.

Material: High Quality Plastic

Vintage - New Old Stock

Applications: Electronic Control Potentiometer, Volume Control, Audio Control, Guitar Knob. 

Learn More

Hardware, timing belt/pulley. COG-Gear 14XL. Learn More

Unidentified MFG - 2505764 - Connector, PCB Eyelet.

Gold Plated.

Dimensions: (1mm ID) 2.7mm D OD x 2.3mm above board.

Shaft 1.5mm D OD.

Package of 50.

Learn More

Enclosure. Metal enclosure cover or bottom only, 2 tracks to slide onto top of enclosure. OD: 72.9mm long x 50.7mm deep x 7.1mm high, ID: 72.9mm long x 41.4mm wide. (See P/N 0270062-05 for enclosure base, not included). Learn More

Hardware, cable ties. 3 Gang with labeling area. Size: 6" ties, overall 7-1/4" long. Color: black. Package of 10. Learn More

Thermalloy/Aavid - THM6107-14 -  530714B00000 - Hardware, Heatsink.

For TO-220 Components.

One Oole Mount.

Color: Black

Material: Aluminum, Anodized

Mount: Bolt

Weight: 113.398093 g

Natural Thermal Resistance: 20.3 °C/W

Thermal Resistance @ Forced Air Flow (100 LFM): 4 °C/W

Type: Passive

Dimensions: Depth 18.03 mm, Height 12.7 mm, Height Off Base 12.7 mm, Length 25.41 mm, Width 25.4mm

Dimensions: 1" wide x 1/2" deep x 3/4" high.

Alternate: 530714B00000

Learn More

Thermalloy/Aavid - THM6103B - 5203A - 520327B00000G - Hardware, Heatsink Passive.

Two Piece heat sink adds extera cooling in the same amount of board space as other solutions.

Radiator Cooler for TO-3 Components

For one (1) TO-3 Component. Two Part Heat Sink.

Black Anodized Aluminum.

θn= 4.7 Natural Convection Thermal Rwesistance

Dimensions: 38.86mm long x 31.75mm wide x 12.7mm high. (1.250" Long x 0.500" x 1.250").

Mount: PCB 2 hole frame 39mm long x 14.33 wide x 9.4mm high with 30.5mm centers.

New Old Stock

NSN 5999-00-110-1037

Learn More

Thermalloy/Aavid - THM6019 - 501906800000G - Heat Sink.

12 Fins - High fin count enhances efficiency

Dissipate up to 10 watts

Diamond Basket 5010.

Case/Package: TO-66

Color: Black

Material: Aluminum

Mount: Bolt, Screw

Package Cooled : TO-66

Natural Thermal Resistance: 8 °C/W

Thermal Resistance @ Forced Air Flow (100 LFM): 4 °C/W

Type: Passive

Dimensions: Height 25.4 mm, Height Off Base 25.4 mm, Length  39.37 mm, Width 26.416 mm

RoHS Compliant

Weight: 0.3oz.

Learn More

Thermalloy - Aavid - THM13103 - 74-43094-01 - C- Hardware, Heatsink.

Material: Polished Aluminum.

Black Anodized.

29mm Disc, Round 3 Fin BGA Flatpack

Weight: 12g

Three Round Radiators Stacked, Stick-On.

Dimensions - Overall: 29mm Diameter x 16.5mm Tall

Base: 18mm Square x 5mm Tall

Total Disc Stack: 29mm Diameter x 11.5mm Tall

Ready to cement-on-to-device.

Note: 74-43094-01 REV-A01.

Learn More

Thermalloy/Aavid - 2049469-05F - Hardware, Heatsink.

For 2 TO-220 components.

11 Fin, High Capacity.

Vertical Mount.

Material: Gold Anodized Aluminum.

Dimensions: 2-7/16" high x 1.5" square. 

Mount Centers: 1-1/4".

Compact and Efficient Design.

Learn More

Tech-Etch Inc - TF250M42C070-16-15 - Beryllium-Copper Fingerstock Gasket, EMI RFI Shielding Strips.

Shielding strips are required by a wide range of industries for a variety of applications. EMI/RFI Shielding Products are designed to either keep out or keep in electromagnetic interference. Shielding reflects and absorbs incident radiation. The higher the attenuation of the shielding, the more effective it is at keeping in or out the undesired electromagnetic interference.

Beryllium Copper (BeCu) is a high performance metal which can be fabricated into a wide variety of components. Its mechanical and electrical properties make it the ideal material for EMI/RFI shielding products.

Beryllium Copper EMI Shielding performance

• High electrical and RF conductivity
• Superior tensile strength & attenuation
• RoHS compliant & recyclable
• Excellent corrosion resistance
• Excellent plating compatibility
• Maximum spring properties
• Moisture and UV resistant
• Superior endurance over other alloys

Clip-on Mounting provides a reliable mechanical installation when there is an accessible mounting flange.

H-Field – 100kHz	E-Field – 10MHz	P-Field – 1GHz
>110 dB	>110 dB	<110 dB

"TF" = Low Compression Force, 0.0025" Thick, 25% Commersion = 15 lbs/ft, 50% Compressions = 35 lbs/ft15

Pitch: 250 Center-to-Center distance one finger to next (Inches X 1000)

Style: "M" Clip No Snag Fingers Feature

Width: 42 Clip Size (Inches X 1000)

Length: Diameter for Contact Rings70

Length" 16".

Application: Beryllium-copper fingerstrips can be used to close a gap between two conductive surfaces. A wide range of diverse installation can be used for a variety of shielded room, door, cabinet doors, cover, printed board, Flashboard., IC shielding.

Alternate: 3012-02008

New Old Stock

 

Learn More

Enclosure. Housing with lid. Self adhesive backing or four 0.096"D holes in rear. Dimensions: overall with lid 4.0" long x 1.690" wide x 1.680" high with a slot in lid 1.66" wide x 0.406" wide. Each end has a hole for cable exit 0.199" D. Learn More

Hardware. Pull-out Pins - Dowell, 1/4" x 3/4". Material: stainless steel. Learn More

Switch, hardware. Button switch actuator/cover. Dimensions: 0.156-0.500". Inside diameter: 0.156". Inside length: 0.500". Inside length tolerance: 0.438" - 0.562". Wall thickness: 0.038". Wall tolerance: 0.028 - 0.048". Color: Black. Learn More

SOUTHCO - SOU47-62-532-50 Hardware, Screw, Fuse Holder Knob.

Material: Stainless Steel

Finish: Powder Coat

Color/Appearance: Black

Knob Style: Knurled

Knob Material: Aluminum Alloy

Thread or Hole Type: 10-32

Head Style: Phillips Recess

Recess Size: Phillips Recess #2

Installation: Snap-in

Series: Styled Knob

Unfastened Screw Projection (mm): 5.90

Class: 47/4C - Captive Screws

Thread size: 10-32.

Fastened screw projection: 10.4 mm (0.41 in). OP thickness: 1.6mm (0.06 in).

Unfastened screw projection: 5.9 mm (0.23) in.

Additional Information: http://www.southco.com/product

Learn More

Hardware, handle repair kit. B-50-A for B-32-A handle assembly. Learn More

SCHURTER - 1241.1113.7050 - Hardware, Knob.

Status: Discontinued 12/2019

For Schurter switches, with directional arrow.

Material: Plastic

Color: Black.

Mount: 2 Pin, Snap-on.

Learn More

Bezel and red lens. Lens: 3.027" long x 0.899" high (Appears scratched). Black plastic bezel: 3.511" long x 1.359" high. New, older stock. Learn More

RITTAL CORP. - PK9519-000 - Enclosures.

Dimensions: 182mm x 180mm x 165mm.

Material: Polycarbonate plastic.

Gasket : Polyurethane.

Protection Class: IP66.

Color: Light Gray.

Alternate: Allied Stock 70476045

Learn More

Rittal Corp - PK9514-100 - Enclosure.

Fiberglass Reinforced Polycarbonate Housing with Smoky Transparent Polycarbonate Lid.

Without Knockouts.

Protection Category: IP66 Protected from Total Dust Ingress. 

Color: Grey - RAL 7035

Operating Temperature: 80 C

Dimensions: 180mm Wide x 90mm Deep x 110mm Tall. (7" long x 4.25" wide x 3-5/8" high).

Protection category IP to IEC 60 529: IP66

IP66 enclosure is waterproof against hose-directed water, rain or snow, it's not intended to be submerged in water.

Protection category NEMA: NEMA 4X

Note: Cover securing Turn-Lock Fastens P/N 9582.000 (Polymide Screws) Not Included and need to be Purchased Separately. (M10 X 1.0 Thread)

Approvals: CUL, EN

Made in Germany

UPC 4028177139510

Alternate: Newark 54AC6913, Lieske 282080

See SKU 177256 for Rittal Corp - 9581-000 - Hinge Kit.

Great enclosure for Projects, Instrumentation, Process Control Etc..

Price listed is for one box with cover. Factory packaging is 2 units per box.

Learn More

REES Inc - 04933-091 - Hardware.

The following guards are designed to mount to the single or double plunger push button switches.  They are die cast from a high strength zinc alloy (Zamac #3).

• Additional length mounting screws are provided with each guard.
• Series 09002 legend plates can be mounted on these ring guards. 

Powder Yellow Ring Guard- 1" Height dimensions.

For Use with 09002 Series

Designed to mount to the single or double plunger push button switches.

Complete with mounting screws.

UL, CSA

UPC 64867133091

Alternate: 3264-04933-091

Made in USA

Learn More

Hardware. Pull plate, with 2 handles and hardware. Finish: US32D. NIB. More info: http://www.rockwoodmfg.com/detail_b.php?item=236 Learn More

RICHCO PLASTICS CO - V-1010 - Hardware, Cable Clamp.

Cable Mounting & Accessories Clip,Screw Mnt,Black,1 in Hold Dia, Clip,Screw Mount,Black

Mount: 2 Screw. 0.7" Centers.

Material: Polyvinyl Chloride, PVC.

Color: Black.

Dimensions: OD - 1.130" Wide x 1.13" Deep x 0.98" High. ID - 1.00".

From: 100 manufactures bag.

Alternate: Newark 86AH0092, Digi-Key RPC1683-ND, Mouser 144-V-1010

 

Learn More

RADNOTI - 159954 - Universal Stand Clamp for the Medical Industry.

Simply hook on and tighten thumb screw.  No need to disassemble existing stand or remove and replace components to add a an additional component.

Open Sided Connector.

Medium (Red).

Learn More