Sensors

NAMCO CONTROLS - PB120-10000 - Sensor, Proximity.

PROXBLOX, Sensor Wiring and Diagnostic System.

Dimensions: 6-1/2" wide x 1-3/4" deep x 3-3/4" high.

Mount: 2 hole 5" centers.

New Ol Stock

Proudly Made in USA.

Learn More

Photoelectric sensor. 10-30VDC 200mA. 4 Pin male connector. Learn More

Sensor, proximity. PNP 10-30VDC 100mA. Complete with attached 3 conductor cable, single ended. Learn More

Diode. Solid state temperature sensor 2.2 Sensitor. Marked MSC222K. Package: glass, axial leads. Learn More

REV-E BOARDS BPX38-3 Learn More

10-30VDC Single Open-collector output InfraRed Sensor Controller 11-Pin Plug-inwith sensitivity adjust & operate red LED. Learn More

Sensor, pressure. Piezoresistive, 0 to 14.5psi range, differential type. Package: Unibody 6 gold leads. Learn More

Sensor, pressure. Piezoresistive 0-1.45 psi 0-10 kPa 0-25mV 1%, differential ported "Stovepipe". Manufactures label reads: MPX2010GS. Marked MPX2010D. Mount: through hole. Silicon. Note: The MPX2010/MPXV2010G/MPXM2010 series silicon piezoresistive pressure sensors provide accurate and linear voltage output directly proportional to applied pressure. The sensor is laser trimmed for precise span, offset calibration and temperature compensation. The series includes a strain gauge and thin-film resistor network integrated on each chip. Learn More

MIDDEX ELECTRONIC - WKR 22 - WKR-22-120 - TOOL SENSOR

For Systems WK1T, WK4T, WTK Scanning

Range:120 Sensor

Connections: 4 Pin

Absolutely leak proof in the most demanding environment

Fast and constant scanning speed

Sensor diameter only 22mm

Scanning direction right or left

Object, tool, and free space scanning

PNP outputs, wear resistant, short protected

NPN outputs, wear resistant, short protected

Inverting of outputs via DIP switch

Output latching until new scanning cycle

WKR22-120 = WKR-S120 9023

New 

Learn More

Military New axial leaded Thermal ResistorLockheed Martin 6096777-1, Elmwood Sensors 7092-1 Learn More

Gauge. Blood pressure. Mount: panel. Dimensions: 2.648" (67.2mm) D x 1.349" (34.2mm) deep. Overall with hardware and bracket 2.633" (66.8mm) deep, (2.006" behind panel). Bracket: 0.747" wide with 3.640" centers. Learn More

Sensor. W/O Fiber optic cable. Learn More

Modulated photoelectric emitter. Light operated. 12-16VDC 0.9watt. NIB. Learn More

Microswitch. Factory new. Package: 4 Pin. Learn More

MICROTEMP - 4178A1 Thermal Sensing Fuse.

A surge suppressor which provides overvoltage protection for AC power lines, coaxial transmission lines and communication lines using a virtual ground rather than a separate ground conductor.

Thermal Switch.

TCAGT84C/178 Deg F.

Package: Axial Leads.

Learn More

Fuse, thermal. 117 Degree C / 242.6 Degree F. Thermal cut-off. One time, will not reset. Case: axial leads. Note: Marked 4239AMZBY. Learn More

MICROTEMP - 4333A 1RQRU – Axial Thermal Fuse - One-Shot Fuse - 169 Deg C, 336 Deg F The product is a lot of 8 Microtemp 4333A 1RQRU axial thermal fuses, with a sealed link-type design suitable for interior use. These fuses provide thermal overload protection and operate at a temperature of 169 Deg C (336 Deg F). They are compatible with smart homes and have a maximum amperage of 10A at 250VAC, 15A at 120VAC, and 5A at 24VDC. The fuses are made of aluminum and ceramic materials, with a silver color finish. They can be mounted using solder, clip-on, or other methods, and offer protection against overtemperature conditions. The product is classified under the category of electrical equipment and supplies for business and industrial use. Micro-Temp Thermal Fuses have provided highly reliable back-up safety limits for well over 50 years. Known as a thermal fuse, thermal link, or TCO, the MICROTEMP® thermal cutoff provides protection against overheating by interrupting an electrical circuit when operating temperatures exceed the rated temperature of the cutoff. Microtemp Thermal Fuses are designed to protect electronics from catching fire by cutting off electrical circuits in case of overheating. Status: Discontinued MICROTEMP® Features: • One-shot operation cuts off electrical power • Low resistance • Compact size Voltage/Current Ratings: 10A@250VAC, 15A@120VAC, 5A@24VDC. Trip Temperature: 169 Deg C. 336 Deg F (One Shot) Thermal Cutout Alternate / Current Replacement: MICROTEMP 09WX6683, Used in G4AM0600167C Applications: Home Appliances, Automobiles, Workplace Electronics, Office Machines, Portable Heaters and Industrial Equipment as a Thermal Safeguard. New Old Stock Learn More

Rotary shaft encoder. Includes report of acceptance tests, For S/N 74586. Dimensions: 27mm D x 67mm plus 8.8mm long 3.3mm shaft with 34 teflon leads 37" long. No other data available. S/N 74590. New. Learn More

Potentiometer. Resistance: 5K Ohm (1st) section, 20K Ohm (2nd) section. dissipation: 1 watt. Marked: Rotary actuator travel in angular degrees: 3116. (about 8.65 rotations) CUP-A. Cylindrical servo mount, 6 wire leads. Dimensions: 1.813" (46.0mm) D x 1.993" (50.6mm) high. Single shaft: slotted, 0.125" (3.1mm) D x 0.442" (11.2mm) long (plus 2.0mm seat). Note: Resistor, variable, Wirewound, Precision. Military NSN 5905-00-769-4626. Learn More

Multi station plug connector for proximity switches - anschlu�fertige actuator-sensor B 12-Pin Male circular connector on cable to 6"x2.25" yellow sealed box with 8-jacks (5-pin F) for proximity detectors. Learn More

Sensor, current. 25 Amp in. Package: 8 Pin module, Used/removed from equipment. Learn More

Transducer, pressure. 0-2000 PSISG, 28VDC. With a 4 conductor teflon shielded cable. Dimensions: 1" D x 3.5" long. Used/Removed from equipment. Learn More

Transducer, pressure. 0-2000 PSISG, 28VDC. With a 4 conductor teflon shielded cable. Dimensions: 1" D x 3.5" long. NIB. Learn More

Transducer, pressure. 0-1000 PSISG, 28VDC. With a 4 conductor teflon shielded cable. Dimensions: 1" D x 3.5" long. NIB. Learn More