Hardware

Hardware, Acrylic Spacers.

Material: Acrylic Plexiglass.

Clear Colorless.

Dimensions: 3/4" D x 2.0" high.

One end is drilled 1/4" x 0.8" deep.

Package of 8.

Learn More

Hardware, springs. Dimensions: 0.34" OD x 2-3/8" long. Package of 4.

Learn More

Control & Instrument Switch Pointer Knob.

For 1/4" mount with 2 set screws.

Molded-in metal insert tapped for for added strength.

Bakelite Construction with Decorative Cap and Directional Pointer. 

Knurled Grip.

Approximate Overall Dimensions: 0.736" High X 0.731 Wide" X 1.206 Long (Pointer) (18.8 X 18.6 X 30.6 mm) 

Applications: Instrumentation, Test Equipment, Amplifiers, Stereos, Radios, and Switches

Vintage - Never Used - New Old Stock - Military Quality.

Proudly Made in USA

Learn More

Unidentified MFG - 267082 - Hardware, Knobs. Package of 10. Hardware, knobs. For Potentiometers/Trimpots Flat Style. Color: White. Package of 10. Note: Perfect fit for our P/N: MS-022, SKU 5942 pot, not included. Learn More

345-0500 Hardware, Equipment Instrumetation Control Knobs.

Silver on Black, 20mm ("0.80") Diameter, 13.45mm Tall (0.53").

Silver Cap and White Indicating Pointer.

Ribbed Skirted Edges for Solid Gripping.

Ready for 1/4" (6.4 mm) Potentimeter or Switch Control having a Flattened Shaft ("D-Shaped"). 

Push-On, no set screw but has a metal insert for added strength

Potentiometer Knob.

Material:  Phenolic / Bakelite

Black w/White Line.

Vintage  - New Old Stock.

Learn More

Metal Enclosures 3.107" wide x 2.5" tall x 2" deep ( 2-parts), no side panels.( ID: 3" x 2.3" x 1.8" ) (See P/N 0270063-08 for lid) Learn More

Thermalloy/Aavid - 5-600 -  Hardware, Heatsink.

Designed for applicatons with airflow traveling in a single direction such as chassis, power supplies, chargers, and rectifiers.

Square Bar.

Extruded Aluminum Channel

Black Anodized.

Dimensions: 5.3" x 0.75" x 0.77".

Learn More

TOMCO - 3472R5 - Valved Flareless Tube Plug Fitting 

Tomco's precision line of couplers are ideally suited for instrumentation and chemical processing applications.

316 Stainless Steel Construction

Positive roller lock latching mechanism allows 360 degree swivel action

One hand required to connect or disconnect

Viton seals 

Smallest possible dimensions with maximum orifice size.

Integral flareless tube port fitting

Temperature range +20F to 400 F

Vacuum Data - connected 29.50 in. Hg

1/4" Tube

Packaged in factory reusable clear protective plastic tube

Note: Valved plug P/N 3472R5 must be used with valved coupler P/N 3452R5

Made in USA 

 

 

Learn More

Timing belt pulleys. Dimensions: Outer ID 23.8mm D x 14.2mm high. Inner belt area is 17.3mm D x 10.9mm high max. will fit a 7.68mm (0.302") shaft. New. Note: Unit is missing one needed set screw. Learn More

Square D - EK300-1 Series D2 - Electrical Interlock Kit for 30A Switch.

1NO/1NC SPDT

For 30A Switch.

Max. Voltage: 600V AC/DC

Voltage: 240/600V AC/250/600V DC

For Use With Heavy Duty Safety Switches

Weight: 1 lb.

Alternate: 48307, UPC 85901-48307

New Old Stock - Proudly Made in USA

Learn More

SOUTHCO - 6-302 - Hardware, Magnetic Door Latch.

Gain a lot of flexibility in applications where you can use these magnetic fastening latches instead of mechanically actuated latches. They are spring loaded for added versativity, are great for light or heavy sheet metal doors and enclosures, tolerate misalignment, and can even be used with non-metallic enclosures by adding a steel strike plate.

A heavy duty magnet 1.23" long x 0.36" thick including steel sides, with a heavy duty spring loaded push button 0.3"square that will push your door open when you push on it.

Will require a mating 1/4" or larger steel tab on door cabinet, when pushed the magnet pulls back.

Dimensions: 3" long x 1" x 0.5" thick.

Materal: Tough Polypropylene 

Mounts with two slots approximately 2.7" apart.

Note: Spring loaded to push open.

New Old Stock

Learn More

ANSELL AlpaTec SOL-VEX - 37-175-11 - 15 Mil Gloves, green Nitrile. Size11. Package of 12 Pr.

Applications: Chemical Plants and Transportation, Chemical Processing, Oil Refining and Petrochemicals, Cleaning and Degreasing, Exposure to Chemicals, Solvents, Hazardous Liquids, PVC Cements or Standing Water, Janitorial and Maintenance Work

Gloves, Green Nitrile. Size: 11.

Flock-lined, Straight cuff.

Sandpatch Grip Design.

12 - 13" Length.

15.00 mil Thickness. ANSI/ISEA Puncture Level: 3

Industry Standards: ANSI 0 (Cut), EN388 3101, EN374 AKL, EN374 Micro, FDA 21 CFR 177.2600   

High performance Nitrile - Reliable chemical protection. Reduced chemical burns and caustic exposure. Puncture and abrasion protection. Reduced hand injuries. Cotton flock liner - Moisture absorption, Reduced dermatitis and increased comfort.

Component Materials Comply with 21 Cfr 177.2600 for Food Contact

Marked: For protection against OTTO Fuels.

USDA Accepted. FSN: 8415-01-147-6263.

Package of 12 Pr.

Learn More

Hardware. Cover for a 5/16" round object approximately 1/2" deep x 1/8" D. Nipple to pull it off. Material: plastic, black. Learn More

Hardware, cable clamps. Dimensions: 7/16", 10.1mm ID, 13mm OD. overall 25.9mm high. Material: nylon. Color: natural. Package of 50. From manufactures 1000/bag. Learn More

RICHCO PLASTICS CO - WIT-18R - Hardware, Cable Ties.

4-1/2" Long.

Color: Natural.

Material: Nylon 6/6

Dimensions: 1.016mm X 114.7064mm X 2.54mm

Package of 1,000 pieces.

Learn More

Picker International - Marconi - 189564 Hardware, Plexiglass / Acrylic Sheet.

Shatter-resistent or lightweight alternative for glass.

Plexiglas sheet is an excellent electrical insulator with a high dielectric constant.

More Heat thermal shock resisant than glass but also has thermal movement 8 times higher than glass.

Dimensions: 4.5" Square x 0.5" thick.

Clear.

Former Application Manufacturer of advanced medical diagnostic imaging systems.

Learn More

PacTec - K-CNL-0006BK - CNL-0006 Black Kit - Connector, Hood, Project Box.

The CNL-0006 is a large connector housing with a blank end and a DB-25 right angle end. Top and bottom covers snap together to house an assortment of applications.

CN Series

D-SUB DB25 Hood Enclosure.

Material: ThermoPlastic

Top and Bottom Covers Snap Together

Dimensions: 3.6" Long x 0.81/0.94" High x 1.7/2.3" Wide

Accept a PCB Approximately 1.5 inch x 2.5 inch.

Color: Black

Alternate: Newark 91F5275

RoHS Compliant

Made in USA

 

Learn More

PANDUIT - PLP1.51-M Hardware, Cable Ties.

Grouping and organized your electrical wires has never been this easy with this convenient PLP1.5I-M cable tie from Panduit. This cable tie has a temperature range of -40 °C to 85 °C. This product comes packaged in bulk, so the parts will be stored loosely. This product is 6 mm tall.

Status: Discontinued

Style: Standard Locking with Push Mount

6-1/8" long (156mm).

Bundle diameter: 1-1/4" (32mm).

Tensile Strength: 178 N Minimum 

For panel thickness up to 0.093" (2.4mm).

Max. Bundle Diameter:  32 mm

Operating Temp.: -60 to 85 C

Material: Nylon 6/6.

Color: Natural.

Standards Met  UL Recognized (File #E56854), UL 62275 Compliant (Type 1, 11), RoHS Complaint

Package of 50.

Learn More

MSC - 351-29862-003 - Hardware, Heaksink.

Lockheed Assembly 6133771-3 with 8 displays.

Material: Aluminum Alloy 2024.

Dimensions Overall: 6.870" long x 0.812" high x 1.120" wide.

Military NSN 5999-01-097-3865 or NIIN 010973865.

Learn More

LORD Mfg. - 204PHC18-100 – Vibration Isolation Platform Shock Mount 3". LORD Plateform Mounts provide effective isolation against vibration. The contour of the flexing element was developed to provide uniform stress distribution. This, plus high strength bonding and the use of specially compounded elastomers, provides maximum service life. LORD Plateform Mounts are easy to install and provide space efficiency. These rubber mounts are invaluable for isolating delicate components from shock and vibration. They also electrically insulate the component from the mounting surface. Heavy Duty Design Mount: 7/16 - 14 Diameter Threaded Mounting Through-Hole. Center-Center Mount Holes: 2.50” X 0.25” Diameter Material: Rubber and Steel 0.40”. Dimensions: Base 3" Square X 1.75” Height. Rubber Support 2.0” Diameter Alternate / Similar: 6008K7190 lb Additional Information: https://www.modusadvanced.com/hubfs/LORD-Catalog/LORD_Industrial_Catalog_PC7000.pdf Applications: Typical applications include electronic equipment, business machines, medical equipment and small pumps, engines and gen sets. New Old Stock Made in USA Learn More

Leviton - 13351 - Lampholders/Tombstones.

This Leviton T8 or T12 low profile lamp holder is for use with fluorescent lamps having a medium bi-pin base.

Non-shunted Bi-pin Lamp Holders/Tombstones.

Low Profile, Slide-On, Snap-On, or Bolt-On Mount. 

Quickwire 18AWG Solid or Str Tinned.

For T8 LED Replacement and all T8/T10/T12 Fluorescent lamps, 600V 660 watt.

Listed: UL/CSA.

UPC: 041175370918

Package of 2.

Learn More

ITT Cannon – C&K - 161051PKG5 - Switch Bezel, PVA Series Key Switch Cap, Shaft: SQ 1/8". Package of 5. P/N 161051 PKGS or 161051 Hardware Knob, Switch Bezel, Switch Cap. For Switch Banks and Key Switches with a Square 1/8" Shaft. Material: Plastic. Type: Round For Use Key Switches Designed for: Various PVA Series Key Switches Color: White Operating Temperature: -40˚ C to 85 ˚C Dimensions: 0.291" Diameter x 0.276" Height. (7.4mm x 7mm) Applications: Automotive (air conditioning, lighting), Industrial, Control panel Package of 5. Note: Perfect fit for a switch bank like our SKU 1772, not included. Made in USA – Difficult Cap to Find Learn More

Russell - Hazel - BoxORC1 Enclosure.

Tool case with snap lid.

Material: Vinyl, slightly padded and reinforced.

Dimensions: 7 x 4 x 1" deep.

Application: For your keepsakes, small tools, replacement parts, etc.

Color: Black.

Learn More

HOFFMAN - 6960B - wall Mount Steel Enclosure.

Heavy Duty.

Material: Mild Steel.

Seams continuously welded and ground smooth.

Four Internal Weldnuts provided for mounting optional panels or terminal block kits.

External Mount: 4-hole wall mounting flange 0.75" wide on each end (4) - 7/8" conduit holes, two on one long side, one at either end. Steel thickness: 0.085".

Approximate Dimensions: 8" wide x 10.0" high x 4.00" deep. (ID: 7-3/4" x 8-3/4" x 3-7/8" high).

Color: Gray.

Application: Ideal for a broad range of applications, the enclosure’s screw cover is not included but would have been secured in each corner for a positive seal but easily removed. 

Note: Does not include Screw-on Cover.

Note: Enclosure are very heavy and require additional shipping charges dependent upon destintation. 

Learn More