Hardware
Electronic Hardware Components & Parts
Electronic Surplus carries a broad variety of surplus hardware components and parts. We have electronic knobs, gears, bearings, enclosures, spacers, and much more. Our electronic hardware for sale comes from top-grade manufactures like 3AM and ABB Control.
Some of our electronic hardware for sale comes in the manufacturer’s original packaging, while others are slightly used. We’re proud to say that when you order a used electronic hardware component from Electronic Surplus, you don’t have to worry about quality. Our team of experts checks each and every used item before we put it up for sale.
Shop our surplus hardware components below. Is the part you need out of stock? Request it here.
-
Unidentified MFG - PT-241 - HARDWARE PACKET$3.00HARDWARE PACKET with 8 pcs 1 1/2 inch. long #8 philip head screws & 8pcs. #8a speed nut. Learn More -
Keystone - PT-237 - Hardware, Spacer. Ceramic Standoff 1.25” X 0.50”.Special Price $2.98 Regular Price $3.95IN STOCK - MORE THAN 500 READY TO SHIP!Keystone - PT-237 - Hardware, Threaded Ceramic Spacer. Excellent mechanical strength, chemical erosion resistance, high wear/abrasion resistance and electrical isolation characteristics make these standoff insulators economical and practical for many applications. Material: Ceramic. Exceptional strength in compression and tension. Electrically Insulated and withstands High Temperatures (50 to 1700 F). Threaded for 8/32 screw on one end .50" deep. Radii on all edges. Overall Dimensions: 0.5" OD x 1.25" Long. (12.7 X 31.8 mm). Project Applications: Electronics, Mounting, Isolating. Similar to Cat No. 7670 but threaded only on one side. Learn More -
Unidentified MFG - PT-160 - Hardware, grommet. 0.5". Package of 50.Special Price $6.98 Regular Price $16.95IN STOCK - MORE THAN 100 READY TO SHIP!PT-160 Hardware, Grommet.
Material: Rubber.
Dimensions: 0.499" ID x 0.226" thick with an ID of 0.25".
Each side thickness: 0.078".
Color: orange.
ackage of 50.
Learn More -
Unidentified MFG - PT-141 - Hardware, Rubber Grommet. 0.92" OD. Package of 10.Hardware, Rubber Grommet.
Material: Rubber.
Dimensions: 0.925" OD x 0.50" Thick with an ID of 0.36".
Groove Diameter: 0.625"
Made for an 0.13" Thick Panel.
Package of 10.
Learn More -
Keystone – 893 - PT-039 - Hardware, Stand-offs / Spacer. Nylon Untreaded. Package of 50.Special Price $5.98 Regular Price $7.95Keystone – 893 - PT-039 - Hardware, Stand-Offs / Spacer. #8 (M4) Screw. These spacers have excellent wear and abrasion resistance. Exposure to moisture may cause expansion. Material: Nylon Unthreaded, Dimensions: 0.170" Diameter hole x 0.375" Long. Package of 50, Made in USA. Learn More -
Unidentified MFG - PT-012 - Vector board PINS teflon Silver plated.$3.00Vector board PINS teflon Silver plated. Min 4/$1.00 Learn More -
Unidentified MFG - PT-005 - Hardware, cable clamp. Closes to 11/16". Package of 15.$3.00Hardware, cable clamp. Closes to 11/16". Mount: Self-adhesive. Color: gray. Package of 15. Learn More -
Unidentified MFG - MS-301 - LEVELING FOOT$3.12Black leveling foot 1.5" long threaded 1.15" coarse with hard plastic black foot 0.75"diameter - notch at top/bottom Learn More -
Unidentified MFG - MS-276 - Wire holders. PCB, snap-in. Package of 50.Special Price $3.00 Regular Price $3.50Hardware. Wire holders. Material: plastic, white. Mount: PCB, snap-in. Dimensions: 0.612" long x 0.220" wide x approximately 0.835" above board. Note: Snap clip. Package of 50. Learn More -
Unidentified MFG - MS-244 - Enclosure. Project Box, Two Part.READY TO SHIP - ONLY 78 LEFT IN STOCK!Project Enclosure. Two part.
Material: Durable Plastic.
Dimensions: 5.5" x 4.5" x 1.75".
Two long mounting holes, small 1.6" wide access slot in rear 0.3" high.
Color: Black.
Learn More -
Unidentified MFG - MS-240 - Hardware, spring. 7".$1.00Hardware, spring. Overall 6-5/8" long. Only 7/8" of which is coiled, 1.2mm steel heavy duty. Both ends curved to fit a 1/4" D shaft or hole. Learn More -
Unidentified MFG - 00383-91-20008 - MS-034 - Hardware, Handle. Equipment Handle/Strap.Hardware, Strap Handle.
Heavy Duty Equipment Handle/Strap.
Material: Plastic/Rubber.
Flexible. Dimensions: 1" wide x 6" long.
With Metal/Zinc Support Ends.
Overall length: 7-3/4" long.
P/N: 00383-91-20008.
NOTE: We do NOT include screw harware for mounting.
Alternate/Similar: Reliable Hardware Company RH-0585-A
Learn More -
Bakelite - MS-026 - Hardware. Hollow True Bakelite Tube/Rod, 18" X 1/4" Rod. Package of 4.READY TO SHIP - ONLY 96 LEFT IN STOCK!Hollow True Bakelite Tube/Rod.
Bakelite or polyoxybenzylmethylenglycolanhydride was the first plastic made from synthetic components. It is high resistance which make it a poor conductor of heat and electricity. Due to its hardness and strength it is widely used in switches, relays and connectors. Bakelite is little used in consumer products today due to the cost and complexity of its production and has become quite collectable in recent years.
Dimensions: 1/4" OD x 18" long, with an ID of 0.140".
Great project material. Widely used in electronics, power generation, antenna or various other industries. Insulate high voltage lines or cut to create high voltage stand-offs.
Industrial functional bakelite tubes for insulating, mounting, spacing electrical/electronic parts, wiring or assembles.
Material ranges in color from light brown to black with a flat or satin finish.
Vintage - New Old Stock
Package of 4.
Learn More -
Unidentified MFG - CTI 46402 - Hardware, wire ties. 3-3/4". Package of 1K.Special Price $12.98 Regular Price $16.50CTI 46402 Hardware, wire ties. 3-3/4".
Material: Nylon.
Color Beige.
Locks tightly - Won’t stretch or slide.
Package of 1,000/manufactures factory pkg.
Alternate 3" Uline: S-3569
Learn More -
AAVID Thermalloy - 5925 - TO-220 Heat Sink, Twisted Fin Aluminum.IN STOCK - MORE THAN 100 READY TO SHIP!AAVID Thermalloy - 5925 - TO-220 Heat Sink - Series 5925
PCB mount for TO-220 Single Gauge devices, Transistors/SCrs, Etc...
Mounting Style: Through Hole
Heatsink Material: Aluminum Anodized
Fin Style: Twisted Fin
Natural Thermal Resistance: 22 C/W
Thermal Resistance @ Forced Air Flow (100 LFM): 10 °C/WDimensions: L 6.35 mm, Width: 22.2 mm, H: 31.75 mm
Color: Black
Alternates: 042005, 592502B03400G
Unit Weight: 0.098767 oz
Learn More -
Unidentified MFG - 8-008 - Hardware, Knob. For 1/4" Flattened Shaft.Special Price $0.98 Regular Price $1.95IN STOCK - MORE THAN 1,000 READY TO SHIP!Hardware, Knob.
For 1/4" Flattened Shaft.
Silver Cap.
Dimensions: 0.50" OD x 0.42" high.
Color: Black.
Vintage - New Old Stock
Learn More -
Unidentified MFG - 8-002 - Hardware, Roller. Mounted on a SS bracket.IN STOCK - MORE THAN 100 READY TO SHIP!Hardware, Roller.
Mounted on a stainless steel bracket with 2 holes 0.625" (15.8mm) centers.
Dimensions: Overall 1.240" (31.5mm) wide x 1.163" (29.5mm) high, including roller.
Applications: Mechanical Projects, Robotics,
Very nice.
Learn More -
Unidentified MFG - 8-871 - Cable clamps. 1-1/4". Package of 5.READY TO SHIP - ONLY 73 LEFT IN STOCK!Heavy Duty Hardware, 1/4" vinyl over Steel coated Cable Clamps.
Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.
Material: Vinyl Over Steel.
Adjustable 1-1/4".
Mount: 0.51" slot.
Package of 5.
Learn More -
Unidentified MFG - 8-870 - Cable clamps. 1-7/8".Cable Clamps. 1 7/8" Vinyl Coated Steel Clamp.
Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.
Diameter: 1 7/8".
Material: Vinyl Over Steel.
Mount: one hole slot.
Learn More -
Unidentified MFG - 8-866 - Cable clamps. 5/8". Vinyl Coated Package of 10.Cable Clamps. 5/8" Vinyl Coated Steel Clamp.
Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.
Diameter: 5/8".
Material: Vinyl Over Steel.
Mount: 0.34" slot.
Package of 10.
Learn More -
Unidentified MFG - 8-865 - Cable clamps. 5/8". Package of 10.Hardware, cable clamps.
Avoid tripping hazards by keeping all your cords and wires organized with a cable clamp.
Size: 5/8".
Material: Vinyl over steel.
Mount: 0.35" slot. Package of 10.
Learn More -
Unidentified MFG - 8-863 - Cable Clamps. 9/16". Package of 10.Cable Clamps. 9/16" Vinyl Coated Steel Clamp.
Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.
Diameter: 9/16"
Material: Vinyl Over Steel.
Mount: 1/4" slot.
Alternate: 542.02916, 924695-2, 917962-1
Package of 10.
Learn More -
Unidentified MFG - 8-674 - Hardware, knob. For 1/4" shaft.$1.00Hardware, knob. For 1/4" shaft. Snap on. Knurled. Metal collett. Material: plastic, black. Dimensions: 1.277" D x 0.767" high. No set screws. Learn More -
Unidentified MFG - 8-648 - Hardware, Ceiling Light and/or Fan Pull String. Package of 10.Hardware. Pull String for Ceiling Lights and/or Ceiling Fans.
Length: 34" Braided String
Chain Connect on One End, Bell Style Brass Pull on Other.
Alternate: Midwest Fastener 64633, SATCO 90/1034, Jandorf 60313Vintage - New Old Stock
Package of 10.
Learn More
