Hardware

Honeywell - 2B2 - Switch, Barrier Mounting Contact.

Long Mounting Hardware, Type 1

For Series 2 Operator Interface Pushbutton Switches.

Mounr: Flush

Color: Grey.

RoHS Compliant

Alternate: Mouser 785-2B2, Newark 39B5532

Learn More

Connector, cable. Package of 5. Learn More

Connector, cable. Package of 5. Learn More

DUPONT - TUT10BG3 - Tedlar. Polyvinyl Fluoride Film (PVF).

DuPont™ Tedlar® protective film helps extend the look and life of your design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.

Features: Long Term Protection, Fatigue Resistant, Good Elongation, Good Printability, Good Color Stability, Photolytic Degradation Resistant, Low Toxicity, Good Processability, Alkali Resistant, Excellent Long Term Heat Aging Properties, Crack Resistant, Solvent Resistant, Good Abrasion Resistance, Excellent Dielectric Properties, Acid Resistant, Excellent Formability, Cleanable, Durable, Glossy Surface Aspects, Bacteria Resistant, Heat Sealable, Low VOC, Excellent UV Stability, Flexible, High Dielectric Strength, Flame Resistant, Good Surface Finish, Corrosion Resistant, Good Weather Stability, Mildew Resistant, Excellent Salt Spray Resistance, High Temperature Resistance, High Gas Permeability, Sound Transmitting, Microbe Resistant, Chemical Resistant, Good Stain Resistance

UV Screening Transparent Film.

Roll Length: 4900 Feet x 1" (25.4mm) Thick.

Applications: Major uses of Tedlar are backing materials for photovoltaic panels, with a life expectancy of over 20 years. Another major market for clear Tedlar films is on thermoformed panels used on the inside of commercial aircraft. The Tedlar film provides graffiti resistance and makes the surfaces very easy to clean.

New Old Stock - Highly Discounted

Learn More

BECKMAN - Duodial15 – 2606 - Model RB Helipot Potentiometer 15 Turn Counting Dial Knob The Duodial turns-counting dial reads 15 turns to a precision of 0.01 turns. The dial can be locked in any position. It is designed to be mated with the Helipot Precision Potentiometer or any other potentiometer with a 0.25 inch diameter shaft. Beckman Instruments 2600 Series Helipot Duodial 15 Turn Counting Knob for 1/4" Shaft. Often used with 10 Turn Potentiometers.Bechman is now TT Electronics Specifications & Operation Readout and Operation: Unit shall register a total count of 1499. The number in the center of the window (0 thru 14) indicates completed number of turns of the drive sleeve. Graduated circular dial indicates the percent of a partial turn of the drive sleeve. Dial Division: 50 per turn Minor Scale Division: 1/100 turn Indication: 0 to 14.99 turn Accuracy: Backlash shall be zero between graduated dial and drive sleeve Rotation: The indication shall increase with clockwise and decrease with a counterclockwise rotation. Transfer Point: The number in the center of the window shall change as graduated dial rotates between 94 and 0. Mechanical Shaft Bore: 0.250” Runout: 0.004 in/in Mount: For ¼” (0.25”) Diameter Shaft. Counts 0-14 and continues back to Zero if you continue rotation. Small scale graduated 0-100. Friction Lock Lever on the side to maintain the setting. Comes with Black Plastic Mounting Washer. One shaft locking screw possibly 2606S Removed from in Service industrial instrumentation.. Still very nice parts in excellent condition. Genuine Vintage Beckman – Rare – Difficult Component to find “As Removed” Dimensions: 1.83” x 1.83” x 1.0” Inch / 46 x 46 x 25 mm Made in USA Learn More

TE Connectivity Amp Inc - 745134-1 - Connector, D-Sub Hood / Connector Cover.

Mounting Type: Cable. 

Straight (180°) cable exit.

Cable insulation diameter: 11.68mm.

Shell Size: 3. 

Material: Thermoplastic

Number of Positions: 25

Shielding: Unshielded

Wire/Cable Type: Round

Dimensions: Height 21 mm, Length 53.1 mm, Width 44.5 mm

Note: Hardware, cable clamp backshell. Clam Shell Will fit D-Sub connectors such as Amp Inc 745496-5, not included.

Learn More

 Cable Ties - 58954801186 - Zip Cable Tie 7.5" Black, Package of 100.

A cable fastening device provides strong support for positioning cable and pipe bundles. The design of its head guarantees a high tensile strength.

Bundle and secure cable, wire, and hose. Also known as zip ties.

Standard ties balance flexibility and strength, making them good for most bundling applications.

Description: Strap, Tiedown, Electrical Component

End Application: Sqh-4b towfis

Min. Tensile Strength (psi): 500000 pounds per square inch

Break Strength: 50 Pounds

Controlling Agency: Nylon cable tie black uv-resistant, 7 1/2 nom lg, 50lb tensile strg

Color: Black

Material: Nylon

Material: Plastic Polyamide

Specifications: UL 62275 Type 21, SAE AS33671, UL 94 V-2, MS3367-2

Width: 0.178 inches

Length: 7.500 inches

Maximum Bundle Diameter: 1.750"

Package of 100.

Learn More

Lot of 20 - 069-3322 – 34WWSP - Hardware, Extra Thick Fender Washers 430 Stainless Steel. For 5/16" Bolts. A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders. Extra Thick Fend Washer 0.120” Thick Dimensions: 2" OD x 0.343” (11/32) ID Material: 430 Stainless Steel Hardware, Extra Thick Fender Washers 430 Stainless Steel. For 5/16" Bolts. A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders. Extra Thick Fend Washer 0.120” Thick Dimensions: 2" OD x 0.343” (11/32) ID Material: 430 Stainless Steel Package of 20 • Fender washers offer a bolt or screw a wider bearing surface that will disperse the load weight to a greater surface area and ensure that the nut or bolt is pressed up against a smooth surface reducing the chances the fastener loosening over time because of contact with an uneven surface as well as keeping a fastener from pulling through a hole that is larger than the diameter of the head. • A fender washer though similar in shape to a standard washer the outside diameter is much larger in proportion to the center hole. • Made of stainless steel offers a high level of chemical and corrosion resistance and strength that will outperform and outlast zinc plated fasteners for years without the need to perform costly and time consuming maintenance. • The vast majority of stainless steel fasteners are produced with metals from the austenitic family. Their high levels of chromium and nickel provide tough corrosion resistance and the ability to withstand considerable physical strain without fracturing, albeit at a higher cost than the martensitic varieties. • These Fender Washers are made of Grade 430 Stainless Steel which is Magnetic (Does not contain Nickel) and will outlast washers made of steel or zinc for years to come. Made in USA Learn More

Polycase Products - BF-030315MB - Enclosure.

Electronic enclosures keep your components protected in any environment. Polycase offers an array of electronics boxes and multi-purpose metal and plastic electronic enclosures. Superior materials include high-quality  PVC plastic.

Material: Flame Retardant ABS Plastic

Flame Rating: UL94V-0

Surface: Polished Finish

MB Suffix indicates PC Board Mounting Bosses.

Type: Flanged

Dimensions: 3 x 3 x 1.5".

Inside Depth:1.405".

Internal PCB bosses: 2.125"

Mount Flange Length: 4".

Mount Centers: 3.5".

Material: Plastic, Black.

Note: Flat Cover P/N C-0303 is Optional - Not Included (Glues to enclosure)

Cover is Allied P/N 70196689. 

 

Learn More

Leader Tech - LT-2791 - EMI Shielding EMI Shielding.

Leader Tech (HEICO Company) is a world leading innovator and manufacturer of EMI shielding products for circuit boards, electronic enclosures and interconnect cables.

Antenna High Power MTU Shielding.

Customer P/N DX056-13185. Leader Tech P/N LT-2791

Stainless Steel (Non-Magnetic)

Dimensions: Length 5.212" X Width 0.50" X  Depth 0.2875" 

New in Manufacturers Factory Packaging.

 

Learn More

Hardware, gasket. Rectangular 5 x 3" cork gasket. New. Note: (Non adhesive back). Learn More

Hardware, kit. Mount kit for TO-5 / TO-39 devices. New. Package of 2. Learn More

Hardware, heatsink. For TO-1 devices. Dimensions: 1" x 1" x 3/8". New. Learn More

Hardware, heatsink. For TO-66 devices, 2 part unit. New. Learn More

Hardware, kit. Mount kit for 1/4-28 stud devices. New. Learn More

Motorola - HEPA0503 Hardware, Heatsink.

Adapter kit (only) for TO-5 devices.

New.

Learn More

Hardware, kit. For stud devices using 10/32 threads. New. Learn More

Hardware, kit. For TO-36 devices. New. Note: Cross NTE414. Learn More

Hardware, washer. Flat #4. Material: Fibre. Dimensions: 0.120" (3.05mm) ID, 0.250" (6.35mm) 1/4" OD x 0.032" (0.81mm) thick. Package of 100. Learn More

Enclosure, gasket. Waterproof. Dimensions: 3.6" OD x 2.25" wide x 0.245" high. Nema IP 66. New. Learn More

Hardware, Spacer / Standoffs.

Material: Nylon.

Dimensions: 6.6mm OD x 15.00mm long, with and ID of 4.9mm.

Package of 25.

Learn More

Blank. Material: metal. Dimensions: 1.627" long x 1.190" wide x 0.131" high. COVER or SHIELD ??

Learn More

Unistrut - P1007 Hardware, Nut.

Unistrut products have been helping to build a better world since 1924. Used extensively in nuclear, industrial and commercial construction markets for over 60 years, Unistrut Metal Framing has set the standard for product design, quality and performance.

Brand Name: Unistrut

Finish: Electrogalvanizing

Grade: 45

Material of Construction:  ASTM A1011 SS Steel

Special Features: Part of Complete System

Sub Brand: Metal Framing Components

Thread Size: 0.3125 in

Thread Type: UNC

Type: Channel Nut With Spring

CATALOG DESCRIPTION: 5/16""-18 ELECTRO-GALVANIZED 1-5/8"" CHANNEL NUTS W/SPRING

Category: Screws,Nuts,Bolts,Washers

Note: From manufactures box of 100Pcs/6lbs.

Alternate: P1007EG, 303815, 786364100708, UNSP1007EG.

UPC: 78636410070

Proudly Made in the USA.

Learn More

MATSUSHITA - HG2-SF New Relay sockets for HG relays

20Amp 250V

Power relay socket

PCB MT 8-pin

Lead free.

New Old Stock

Learn More