Hardware

Quad 4-Position Thumb or Screw Driver Binding Post, Phenolic Terminal Strip Board.

These heavy-duty binding posts were designed with the audiophile in mind. The high-quality plating process eliminates the possibility of corrosion to maintain the highest possible signal transfer and resist harsh environmental conditions.

Key Features

• Satin nickel
• Audiophile quality
• Ideal for high power applications
• Non-oxidizing

Phenolic Strip  0.065" Thick

Contact Material: Brass Nickel Plated Screw Terminals

The large 0.25" diameter knurled head allows for positive finger tight connections. Length 0.50"

Contacts: 4 Position Quick Connect or Solder Terminal Lugs on back of unit.

Terminal Strip Dimensions: 2.875" Long X 0.64" High, Protrudes 0.56" in Back

Secure Electrical Connection for Optimum Performance.

Applications: Speaker sets, Shortwave Radio, Antenna Connections, Audio/Visual, TV, Two Radio, Drake 2a, Etc..

Vintage New Old Stock

Proudly Made in USA

Learn More

Warner Electric - 7430-448-003 - Hardware. Mounting bracket assembly kit. The Warner Electric part number 7430-448-003 is a hardware item that functions as a mounting bracket assembly kit. This bracket is sold separately for use with Warner Electric's Compact Series photoelectric sensors, such as the 7115-448-003 model. • Product Type: Mounting bracket assembly kit • Part Name: 7430-448-003 • Manufacturer: Warner Electric • Purpose: Sold separately as hardware for mounting photoelectric sensors • Compatible Products: Used with Warner Electric's Compact Series sensors, such as the 7115-448-003 Made in USA New Learn More

Hardware kit.Terminal accessory. Learn More

Hardware kit. Spring kit. Learn More

NEW Warner Electric 5180 101 011 Control Collar/Spring Learn More

Hardware, rivet. Blind. Self-plugging mechanically locked stem. Serrated stem-type w. Material: aluminum alloy. Steel comp stem. Fastener length: 0.33" min, 0.35" max. Head: 0.054" min, 0.064" max. Shank: 0.14" min, 0.143" max. Head major diameter: 0.238" min, 0.262" max. Grip length" 0.188" min, 0.250" max. Learn More

Hardware, washer. 1.196" OD (30.4mm) (1-3/16") x 0.064" (1.6mm) with an ID of 0.247" (6.2mm). Material: Nylon. Color: beige. Package of 25. Learn More

Hardware. Transistor covers for TO-3 devices.

Material: thermoplastic polyester.

Package of 10. 

Alternate: Keystone 4634

Learn More

Hardware, knob. For 1/4" half flattened shaft.

Knurled.

Dimensions: 0.518" (13.1mm) D x 0.502" (12.7mm) high. (ID 6.4mm x 5.6mm).

Color: black.

Learn More

Advanced MP1000 - - ALMP1000 - Connector, Cable Tie Mounting Pad.

Mounting pad, 1" x 1".

Material: Nylon (PA 66).

Color: Natural.

Self Adhesive.

UL Stablilized

Mechanical Strength: 11 lbs

Alternates: CT280, 6EEE8 

Approval: UL

These mounting bases, used with cable ties, provide an easy, durable method for routing and securing wire bundles or cables.

Made in USA

Learn More

Hardware, nuts. 8/32 wing nuts. Plated. Package of 50. Learn More

Hardware, wire brush. For cleaning motor/commutator. Dimensions: overall the handle 13.5" long. Brush housing is 7" long. Brush extends 5.25" out. Soft steel bristles. Bristles fan out when fully opened. Learn More

 8-043 Enclosures, Project Box.

Material: Plastic.

One semicircular hole about 11/16" x 3/8" for wires.

Bottom plate lifts off with five pins holding it securely in place.

Inside dimensions 2-3/4" square x 1-1/4" deep.

Two mounting flanges on opposite sides of bottom, mounts on 3-1/4" centers.

Color: Black.

Package of 2.

Learn More

Cable Clamps. 1 1/8" Vinyl Coated Steel Clamp. 

Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.

Diameter: 1 1/8".

Material: Vinyl Over Steel.

With 1/4" slot mounting.

Note: New, older stock.

Package of 10.

Learn More

Hardware, grommet. For 1/16" (1.5mm) openings. Material: rubber. Elastic, hot oil and coolant resistant. Dimensions: 1-5/16" (32.0mm) OD, 11/16" (16.8mm) ID, x 3/8" thick. Note: This product maybe replaced with MS35489-19. Package of 25. Learn More

285652-2  - Hardware, Plastic Control Knob.

For 1/4" Diameter Shaft with Metal Insert and Two Set Screws.

Knurled Vertical Texture in the Outside

Beige with Directional Indicator.

Dimensions: 11/16" Diameter x 3/4" High.

Note: With Top Light beige Tab.

Applications: Test Equipment, Instrumentation

Learn More

Umpco - MS-921333-71 - 5340-00-057-2904 -Hardware, Cable Clamp. 1/2" - 13/64".

Cushioned Metal, Synthetic Rubber Jacketed.

Mount: 5.0mm hole.Diameter: 0.203"

Material Thickness: 0.032"

Center to Center Distance Between Loop and Mounting Hole: 0.656 inches nominal

Distance from Loop Center to Tongue End: 0.875 inches nominal

Loop Inside Diameter: 0.500 inches nominal

Note: Clamp is actually marked MS21333.

Military bags are double marked 5340-00-057-2904.

Applications: Commerical, Industrial, Engine Wiring Harness

 

Learn More

Hardware. Handle repair kit. For valves. Learn More

Hardware. Diaphragm repair kit. For valves. Learn More

Sealing module. A Roxtec sealing module consists of two halves, and has removable layers and a center core. Learn More

Sealing module. A Roxtec sealing module consists of two halves, and has removable layers. 3 Core. Learn More

Raychem - 202K163-3-0 - Tubing. Thermofit Heat Shrinkable Polymeric.

Molded Boot Straight Size 63.

ID Supplied: 1.692" (43mm)

Boot Color: Black

Length: 3.9" (99.1mm) 

ID Recovered: 1.11' (28.2mm) 

Type: PO Polyolefin

Shrink Ratio: 1.5:11O

 

Learn More

Hardware, wire maker/ties. Bundle 7/8" (22mm). Material: Nylon. Dimensions: 4-3/8" (109mm) long x 0.098" (2.5mm) wide. Red. Package of 1000. Learn More

Hardware, washer. Material: metal. Dimensions: 15.9mm OD x 2.2mm high with an ID of 4.7mm. Package of 100. Application: For use with ceramic power resistors. Learn More