Sensors

Proximity sensor, inductive, 90 Deg. Sensing distance: 5mm +/-10%. Voltage: 20-250VAC. Current 250mA max. Drop: 5V rms @ 250mA. Off state current: 1.7mA @ 120VAC. NO solid state switch. RA sensing area. LED "Switch closed" indicator. Double insulated. 3 Pin min male connector. Temperature range: -25 Deg C to 70 deg C. Series E1. Manufacture's specification sheet included. Learn More

Proximity sensor, tubular, inductive, 8mm. Voltage: 10-30VDC. Current: 120mA max. NO PNP. 4 Position male micro connector. Sn-1mm 00.04") shielded. Series A1. Manufacture's specification sheet included. Learn More

Cutler-Hammer Eaton - 1555A-6507 Series A2 Fiber-Optic Sensor

Eaton Cutler-Hammer 55 Series Photoelectric Sensors are identical to Eaton Cutler-Hammer's 50 Series except without the interchangeable outputs or logic functions. They offer durability and high optical performance in a cost effective, self-contained package. The 55 Series features sensors with AC and DC operation in a single unit. A relay option is available on these models that provides a 3 Amp SPDT relay output for high current switching.

Eaton Cutler Hammer, 1555A-6507, Eaton 55 Series Photoelectric Sensor, Photoelectric, Sensor distance depends on the fiberoptic cables used, 50 mA max DC, NPN and PNP Open Collector, 50 mA at 30 Vdc, 4 Pin Mini Connector, 10-30 Vdc input, Auto reset short circuit

Features:

• High optical performance includes 100-foot (30.5m) thru-beam range and 6-foot (1.8m) diffuse reflective range
• Both AC and DC operation in a single unit
• Short circuit protected solid-state outputs on AC/DC and DC-only versions (except thru-beam)
• Relay output option provides 3 Amp current switching on AC/DC models
• Thru-beam models feature an infrared sensing beam along with a visible red LED behind the lens in the source unit to aid in sensor alignment
• Fiber optic sensors operate in thru-beam or diffuse reflective mode depending on the fiber optic cable selected
• Glass fiber optic cables plug into NEMA 4 rated sockets on the front of the sensor. Sockets are leakproof even when the fiber optic cables are not plugged in
• Fully potted construction for use in areas subject to washdown, high shock and/or vibration
• Choice of pre-wired power cable or built-in mini-connector versions. Standard pre-wired cable length is 6 feet (1.8m)
• Built-in, patented, 360 degrees rotation 10 degrees tilt ball-swivel base

SELF-CONTAINED,BARE BONES, 30VDC,CONN,W/FIBEROPTIC ADA

10-30VDC / Con.

 

Learn More

Glass fiber steel covered straight threaded 1/16" bundle, 3 ft long. Learn More

Quick disconnect systems. Nano Change Molded Connectors 24 AWG(0.25mm) 105 C Learn More

"Micro-Change" Molded Connector 22-3C, 1 end straight, 1 end 90 Deg. Single keyway M12, 300V 80Deg C. Approximately 20" long.

Learn More

Rotary Optical Encoder. Incremental. Insta-Mount. Enclosed, complete with attached 5 conductor shielded cable, single ended. Dimensions: 2.125" D round x 1.045" high with 2 hole mount 1.812" centers. More info: http://www.beiied.com/PDFs2/MX21.pdf Learn More

Banner Engineering Corp - OPBT2 - Omni-Beam DC Power Block

The OPBT2 is a Bi-Modal™ output OMNIBEAM DC Power Block wired for current sinking (NPN) operation (100mA maximum) by connecting the brown supply wire to +VDC and the blue wire to DC common.

Input: 10-30VDC Output: 100mA max.

Provides regulated low voltage DC power to the sensorhead and logic module with an input of 10-30VDC.

Offers NPN or PNP Outputs.

Learn More

VALU-BEAM Sensor New with cable and military connector 2-Pin male.P/N 80-214114-2P manuf bx. Learn More

Logic module, multi-beam. Range: depends on sensor. Input: on power block. Function: ON-OFF light or dark operate. Interconnecting pins. Note: Alt P/N: 26665. Learn More

Banner Engineering Corp - MB3-4 - Modulated PhotoElectric Amplifier, Logic Module

PLC Interface Module: Type - Distributed I/O Adapter Module; Function - Integral TEACH Push Button And Remote TEACH; Input Voltage - 105 to 130VAC; Supply Current - 100 mA; Additional Information - Output Voltage: 21 to 27VAC

Status: Discontinued

LOGIC MODULE used with solid state LED light sources & phototransistor receivers

Output 250MA sink to ground

Requires +12 to 18VDC

Switchable LIGHT or DARK Operate & Adj Sensitivity

New

Learn More

Logic module interconnects the Power Block and Scanner Block both electrically & mechanically. Provides the LIGHT / DARK Function, and Timing function, all adjustable. With instruction sheet. Learn More

Sensor, opposed mode. PNP NC dark operate, 10-30VDC. Output load capacity 50mA. Sensing beam/range: Visible red, 660nm. (1.2 meter = 47"). Only 12 x 4.3 x 25mm, 9.75" long with cable with a 4-pin male QC plug. Note: One each: VS25EVQ5 / 66944 Emitter and VS2RP5RQ5 / 66943 Receiver. Learn More

Sensor, proximity. 10-30VDC 130mA. Inductive. Threaded. 4 Pin male micro connector. Alt P/N: BES00EZ or 160261. Learn More

Sensor, proximity. 10-30VDC 200mA.Sensing distance: 10mm. Threaded. Alt P/N: BES02WK or 184209. Learn More

Sensor, proximity. Inductive 10-30VDC 200mA. Unthreaded body. Sensing distance: 2mm. Alt P/N: 00030552712. More info: http://www.balluff-china.com/PDF/en/datenblaetter/BES%20516-371-G-E4-C.pdf Learn More

Sensor, proximity. 10-30VDC 200mA. Inductive, NO, unshielded. Sensing distance: 8mm. threaded. Alt P/N: 126760. More info: http://www.balluff-china.com/PDF/en/datenblaetter/BES%20516-360-S%204-W.pdf Learn More

BARBER COLEMAN - 10EV0J00-000-0-00 - Series 10 Temperature Controller with LED Readout.

Dimensions: 2.0" x 3.8" x 5.0"   (5.1 cm x 9.5 cm x 12.7 cm)

Weight: 0 lbs 9.9 oz (0.3kg )

Complete with manufactures instruction and hardware kit.

Made in USA

New

Learn More

ASHCROFT - 30EI60R - 91833 - 50-EI60-E025 0/250F - Industrial Thermometer, Bimetal 5".

The stem on these dial thermometers are mounted on the back. They thread onto pipe or tank connections and measure and monitor temperatures.

Range: 0-250F.

Face: 5" Diameter.

Accuracy: 1%

Case Material: Stainless Steel

Stem Material: 304 Stainless Steel

Window Material: Glass

Connection Location: Back

Type E1.

Connection: 1/2" NPT, every angle.

Stem Length: 2-1/2".

Range: 0 Degrees to 250 Degrees F

Made in USA

New In Manufacturer's Packaging.

Learn More

ASAHI KEIKI - AC-963A-3 - Meter, Digital Tachometer.

The AC-963A displays the number of roller revolutions and outputs alarm signals together with a rotary encoder coupled to the shaft of that roller. In addition, the AM-123 inputs the output signal of an eddy current sensor to display the moving distance of the roller and also to output acoustic alarm signals as well as visual alarm signals with changes in display colors.

Tachometer. 6 Digit.

Display range: 0.0001-999999.

Led 10mm (Red), 8mm (Green).

Mount: Panel.

Complete with Specification Sheets.

Made in Japan

Learn More

AMETEK US Gauge - 8544-152 - 138180 - Remote Reading Vapor Actuated Temperature Gauge

Series 8000

Gauge Dial 2-1/2" Diameter, Syel, White Background with Black Letters.

Case: Drown Steel, Black Finish

Ring and Window: One Piece Polycarbonate, Threaded

BOURDON TUBE: Non-ferrous

Capillary: Brass Armored, 10 Foot Length

Range: -20 to + 120 Deg F. (-28 C to 48 C)

Connector: 1/2-15 NPT Brass Union.

Alternate P/Ns: 03-13-85 H1, 138180.

 

Learn More

Switch, photoelectric. Polarized retroflective sensor, 70-264VAC SPDT. On / Off. Distance: 4.87m (16ft). EM Relay, Mini Quick-Disconnect. Learn More

ALLEN BRADLEY - AB - W56 - Contactor, Heating Element.

Learn More

Contactor, heating element. Learn More