Sensors

Reflective object sensor. Phototransistor output. 30V 25mA 75mW. Package: 4 Pin molded. New. Learn More

Litetouch switch. Mount: panel. Dimensions: 4-7/8" long x 3" wide x 6-1/8" high plus 3/4" each side for mount (2 hole mount with 2-1/3" centers). Used/Removed from equipment. Learn More

Process control, cable. 3 Pin female connector Proximity Sensors and Proximity Switches. Learn More

Extension Cord 6.5-feet with 3-pin connectors for Proximity Sensor or Switch Learn More

20 - 250VAC 400mA or (Your Choice) 10 - 300VDC to 300mADC. Sensitivity 5mm=0.197" Red & Green LEDs 18mm dia, 4-nuts x 93mm Long. 3-pin male connector at end. CCC CE CSA Learn More

Weld Field Immune - 10-30VDC Class 2 source 200mA 72mm long with 4-pin Male connector Learn More

10-30VDC 150mA 18mm x 53mm long 3-wire cable threaded PNP-Output Learn More

TURCK - Bi2-Q12-AP6X

Potted switch

40x26x12mm

10-30VDC

200mA

3-conductor cable PNP

Learn More

8mm diameter SWISS made PNP-Ouput - Short Proof - 58.4mm long, threaded all the way, two plastic mounting nuts. New. with long unshielded cable. Learn More

SENSOR 20-250VAC; 3-400mA. 10-300VDC 3-300mA. s-n = 15mm / 0.59-inches. Off-state current less than 1.7mA. With Red & Green LED indicators - With directions for changing sensing direction. QUICK DISCONNECT MALE RECEPTACLE MINIFAST CSA NRTL/C CE approved 40.3mm square x 70mm long. Learn More

sN: 10mm / 0.39" 30mm OD threaded (with two nuts) sensor 94mm long with Right Angle 3-pin Male connector. 20-250VAC 5mA to 500mA CSA Learn More

TURCK - LSAP-2 -Hardware, Mounting Bracket. Stainless Steel.

Adjusting Bar For Rectangular CP40 Type Sensors Stainless Steel LSAP Series.

Dimensions: 3.955" long x 1.6" wide.

Has 4 holes/slots 28mm long x 5.3mm wide for infinite adjustment.

Two mounting holes 70mm centers.

Two square (threaded for screws) inserts for above holes and two washers, 1.5mm thick.

Alternate: M6942900.

Learn More

TURCK - BI2-M12-AN6X-H1141 Sensor, proximity.  NO HARDWARE

Sensing distance: 2mm.

10-30VDC 200mA.

3 Wire DC NPN.

Housing Material: Brass

Mount: Flush

Max Operating Temperature: -25 °C to 70 °C

Operating Supply Voltage: 30 V

Termination: Connector

Dimensions: Length 52 mm

Compliance: Ratings IP67

RoHS Compliant

Micro-connector 4 Pin male.

Note: ALT P/N 460660000.

 

Learn More

TRI-TRONICS - SDLRF1 - High Resolution High Speed SensorSMARTEYE®, High Gain, Red LED, NPN, F1 Fiberoptic Block.

SUPPLY VOLTAGE: 12 to 24 VDC, Polarity Protected

CURRENT REQUIREMENTS: 75 milliamps (exclusive of load)

OUTPUT TRANSISTORS: (1) NPN and (1) PNP sensor output transistors

Outputs sink or source up to 150 milliamps (current limit)

RESPONSE TIME: High Speed Models

500 microseconds, Very High Speed Models,100 microseconds

High Gain Models, 1.5 milliseconds, LED LIGHT SOURCE:

Options: Infrared= 880nm, Red= 660nm, Blue= 480nm, White= Broadband spectrum. Pulse Modulated

AMBIENT TEMPERATURE:

-40ºC to 70ºC (-40ºF to 158ºF)

RUGGED CONSTRUCTION:

Chemical resistant high impact polycarbonate housing

Waterproof, NEMA 4X, 6P, and IP67 enclosure rating

Conforms to heavy industry grade CE requirements

DIMENSIONS:

Width: 2.715 in (69.0mm), Height: 1.715 in (43.6mm), Depth: .64 in (16.3mm)

MAXIMUM SENSING RANGE:

Retroreflective: up to 20 ft.

Proximity: up to 3 ft.

Fiberoptic Proximity: up to 7 in.

w/o lens / 1 ft. w/lens

Fiberoptic Opposed Mode: up to 16i n.

w/o lens / 20+ft. w/lens

Proudly Made in USA

Learn More

EMERSON THERM-O-DISC - 36TX21-13126 L203-36 - Thermostat, Thermal Cut. L203-36. Normally Closed Contacts

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

Thermostat, thermal cut out.

Temperature. Snap-action.

Mount: SMD bracket with (2) 1/8" male quick connect terminals.

Mount: Panel, round 17.7mm with 24mm centers

Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

Snap Action SPST Contacts Automatic Reset

Set Point: Normally Closed Contact opens at 203F and closes when temperature lowers to 167F. 

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

Learn More

THERM-O-DISC - P1H503TTR

Glass axial lead NTC Thermistor. Through hole Mount, Tubular Package, Resistance 50000.0 Ohms, Tolerance 2.0%, Temperatur seensing.Therm-O-Disc MCPG T/R Partial reel CUT New parts.

Resistor Type: NTC THERMISTOR

Mounting Feature: THROUGH HOLE MOUNT

Number of Terminals: 2

Operating Temperature: 0.0 C to 100.0

Package Shape: TUBULAR PACKAGE

Resistance: 50000.0 ohm

Terminal Finish: TIN

Terminal Placement: AXIAL

Thermal Sensitivity Index: 4004.0 K

Thermistor Application:                 TEMPERATURE SENSING

Tolerance: 2.0 %

Learn More

Optoelectronic Module for Reflective Sensing - Optimum reading place 3.8mm in front of device. Batch counters, level indicators, end-of-tape indicators. TIL32GaAs IR LED paired with TIL78 Silicon Phototransistor in molded ABS housing 18mm wide x 15mm.

Learn More

Solid State Temperature Sensing Silicon Resistor - Positive TC Thermistor - 33-ohm 5% meets MIL-T-23648 Learn More

Sensor, reflective detector. One channel transmissive assembly. Learn More

TAOS - TSL1401 - Sensor, Linear Array.

128 x 1 Sensor Element.

Photodiode, 400 dot per inch sensor pitch.

Package: 8 Dip.

Note: Marked TSL1410 without suffix.

Genuine TAOS - TSL1401 - New Old Stock - Rare, Difficult IC to Find.

More info: www.taosinc.com

Learn More

Thermometer 0-140 Deg F. 3" Face, 4" stem, 1/2" NPT connection, jointed neck for 90 Deg angle adjustment. NIB with manual. Learn More

Sylvania  GTE - SB601AA1H - Switch, Bimetallic Thermal Switch.

Sylvania GTE Thermo-Protectors are designed to provide the ultimate in low cost protection for the electrical equipment industry. The units are small, lightweight and are easily adaptable to any application.

Status: Discontinued

Benefits
• Hermetically sealed
• Compact
• Opening temperature range of 60ºC to 170ºC in 5ºC increments
• Snap action
• Tin plated copper leads in a variety of lengths
• Safe from penetration of fluids
• Ultimate corrosion protection
• No secondary insulation needed
• Can operate in high pressure environments

80 C No current Opening Thermal cut-out

Resettable Switch / Self-Resetting

Package: Glass Envelope 0.285" D x 1.281" long with Radial Leads.

Often referred to "Clicker Fuse"

Vintage Sylvania - New Old Stock - Rare

Learn More

STI CCD - 839-00146 - 48-65Hz Frequency Sensor Module

Input Voltage: 115VAC+/-10% Single Phase

Setting Fequency Point Frequency Adjustable  48 - 65 Hz

Set Point Accuracy 2%

DPDT-OUTPUT

Screw Adjustment

Connections: 9 solder Terminal Hooks

Genine STI - New Old Stock

Learn More

Stemco – GM91 L160 - Thermal Cutout, SPST NC, Push Button Reset Bi-Metalic Disc, Snap Disc, or Snap Switch thermostats are Bi-metal mechanical thermostats that function via the thermal expansion and contraction of a bimetal disc that “snaps” from a convex to a concave shape at a set temperature. When the disc “snaps”, it either completes or interrupts a circuit. Snap Disc thermostats have many practical applications. They are used to ensure the process temperatures do not exceed the thermal limits of the equipment or process. The most common application for a snap switch or snap action thermostat is as an over-temperature protection (or OTP) failsafe. Because of their small size and low mass, the response time of the snap switch design is extremely rapid compared to other commercially available thermostatic devices. Additionally, the bimetal element of a Snap Disc does not carry the current, but acts as the force to open and close the contacts. This snap action thermostats have a long life at relatively high currents – up to 16 amps for the ½ inch series – making snap switches the first choice of many OEMs. SPST Snap Action Thermal Cutout Each Connections: ¼” Quick Connect Terminals Normally Closed Switch Contacts open at 160 F Manual Reset Push Button Switch Dimensions: Oval Shape Flange Mount 50.7mm x 38.1mm wide Mounting holes are 41mm apart on Center. Life: >100,000 Cycles Applications for Disc Thermostats include: Coffee Makers, Washer & Dryers, Dishwashers, Electric Heaters, Ovens, Gas Furnaces, Fireplaces, HVAC, Electric Signs, Greenhouses, Pool Systems, Freezers, Refrigerators, Spas, Vending Machines, Security Systems, Motors, Light Fixtures, Power Supplies, Microprocessors, Business Machines and Table Top Appliances. New Old Stock Made in USA Learn More