Sensors

24VDC Photoelectric Skanner Amplifier / Controller with Adjustable Pulse Delay mode - diode protected NPN Open collector to switch supply voltage at 250mA max - 15-turn sensitivity adjustment - 8-pin octal plug-in Learn More

OPTEK - TT electronics - OHD103-00R Hall Effect Sensor, NPN, open-collector output, latching.

These Hall-effect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic® silicon chip. Included on-chip is a bandgap voltage regulator that allows operation with a wide range of supply voltages. This devices feature logic level output and provide of 20 mA of sink current. This allows direct driving of more than 7 TTL loads or any standard logic family using power supplies ranging from 4.5 to 24 volts. Output amplitude is constant at switching frequencies from DC to over 200 kHz.

• Designed for non-contact switching operations
• Operates over a broad range of supply voltages
• Excellent temperature stability operates in harsh environments
• Suitable for military and space applications

Operates on 4.5 - 24VDC

Output Max 20mA DC.

The latch is reset (off) in one of two ways; by aligning a South magnetic pole with the front face or temporarily removing the bias voltage supply.(off).

The back face has a 45-degree bevel. Facing the leads. with the bevel down, the three leads are numbered 1-2-3 from left to right.

Positive (+) supply connects to pin 1, negative (-) common to pin 2 and the output to pin 3.

The output completes a switch to common when it is "on."

Applications: Non-contact switching operations, Brushless DC motors, Multiple pole magnets, Non-contact reflective object sensor, Assembly line automation, Machine automation, Machine safety, End of travel sensor, Door sensor

Learn More

OPTEK - OHD100 Hall Effect Sensor, NPN, open-collector output, non-latching.

Contains a linear amp and Schmitt trigger to provide sharp "on" and "off" transitions when a South magnetic pole aligns with the front face (on) and is then removed (off). The back face has a 45-degree bevel. Facing the leads. with the bevel down, the three leads are numbered 1-2-3 from left to right. Positive (+) supply connects to pin 1, negative (-) common to pin 2 and the output to pin 3. The output completes a switch to common when it is "on."

Designed for non-contact switching operations

Operates on 4.5 - 24VDC,

Output max 20mA DC.

Operating Temperature: ‐55 °C to +150 °C

New Old Stock

Learn More

Side-viewing optical sensor TO-92-size three leads. No other info avail. Learn More

PHOTOMICROSENSOR Amplified Light-Modulation Long Distance- Retro-Reflective Dark-On small flange-mounting 1.1" tall plus three leads may contain lead, but not enuff to kill ya Learn More

OPTEK - KS3175 - Photodiode.

Body dimensions: 1/8" D.

Package: Hermitically Sealed

Domed Lens

Contact: Single Lead,

Pin 1" Gold Plated.

Applications: Non-contact reflecƟve object sensor, Assembly line automation, Machine automation, Machine safety, End of travel sensor, Door sensor

Learn More

OMRON - EE-SY148 - Reflective PhotoSensor.

Status: Discontinued

Transistor Output Emitter and Collector.

Anode & Cathode(K) LED Emitter.

Matched Detector Pairs.

Used for Short Distance Sensing.

Diagram attached for CO Detector.

Dimensions: 5.1mm Thick, 18mm Wide x 15mm Less Leads. 

NSN: 5961-01-176-0009

Alternates: TIL139, 543503138, 143503138, 8139600

Learn More

Electroswitch - OAK INDUSTRIES - LCE1N-2G09-36-3 Encoder, Rotary, 700 Series.

Electroswitch Electronic Products acquired OakGrigsby. 

Manual 2 Bit, 9-cycle, 36-Position with detents.

Gray code.

Housing material: Plastic, Gray.

Operating Temperature: -40C to 85C

Mount: Panel, Threaded-bushing.

Rotatiopn Life: 50,000 Cycles.

Max Operting Speed: 30 RPM

Dimensions: 0.890" (22.6mm) long x 0.830" (21.0 mm) wide plus 3 PC leads x 0.336" (8.5mm) high. Bushing length: (3/3-32), 6.3mm long. Shaft: 0.250" (6.35mm) D x 0.500" (12.7mm) long.

Note: Marked OAK 700. (0.830" x 0.343").700 encoder

Additional Information: https://www.electro-nc.com/oak/p0710.pdf

Learn More

Electroswitch OAK-GRIGSBY INC. - 94Q100-40-00 - Rotary Encoder.

The 900 Series offers a full line of low cost, rugged optical encoders with incremental output. Well suited for industrial motion and position sensing, their low profile and high resolution also make them ideal for panel mounted applications. A two-channel quadrature code allows the encoder to detect the direction and magnitude of the input motion applied to its shaft.

Optical. 100PPR, 3,000RPM max.

Two Channel Quadrature Output.

Style 2 Output: NC + A B.

Mount: Panel, 1/2" bushing and 1/4" SS shaft, ball bearing type, spins freely.

Package: Die Cast Housing, 1" Square.

Standard 4" 4-pin Ribbon Cable and Connector.

Note: Compact, Robust, Economical. 100 million+ operations.

 

Learn More

NAMCO LEUZE Danaher - EP130-14231-TTL - Infrared Slim-Line Photo Electric Sensor / Scanner

Status: Discontinued Photoelectric Eye

12-24VDC

Photoelectric 200MM NPN 24VDC RK72/2 200

Diffused Scanner

Input Modulated LED

Adjustable Sensitivity

Reverse Polarity & Short Circuit Protected

Factory New

Made in Germany

Learn More

MICRO DEVICES - LL61501 Switch, Temperature.

A Thermal Fuse or Fusable Link is a cutoff which uses a one-time fusible link. ... Unlike electrical fuses or circuit breakers, thermal fuses only react to excessive temperature and not to excessive current (unless the excessive current is sufficient to cause the thermal fuse itself to heat up to the trigger temperature). This fuse breaks the circuit when the temperature exceeds 150C.

Micro Thermal fuse, 150 Deg C. (300 F)

Package: Epoxy Molded, Radial Leads.

Dimensions: 6.8mm wide x 2.5mm deep x 11.2mm high.

Lead spacing: 4.2mm.

Alternates: G4AO1152C, D150-002, 4300A1, LL61501, WP3392519

Learn More

Current Sensor. Hall effect 0-50Amps AC or DC. Measuring range- 70 A, secondary signal-50 mA, supply voltage:12-15 Bi, accuracy: 0.9%. Technology : Closed loop Hall Effect. Package: PCB-mounting, 37mm x 25mm x 27mm above board. Learn More

Thermistor. 4.5 Ohm at 25 Deg C / 2.96 Ohm at 60 Deg C. Package: 8.2mm round bead with radial leads.

Learn More

Sensata Klixon - C4344-198-15 - 3100-3-322 Thermal cutout. SPST NC 450 Deg F.

The Klixon® 4344 precision thermostat is constructed with a snap-acting bimetal disc, which serves as the actuating element. As the temperature reaches a pre-determined calibration point, the disc snaps to its reverse curvature producing a crisp, positive switching action inherent to Klixon® thermostats. This feature assures reliable, consistent operating temperature over a long cycle life. The standard thermostat is copper-nickel plated with silver contacts

Note: Elmwood/Honeywell 3100-3-322 

SPST Snap Action Normally Closed Contacts

Normally Closed: Limit type application; contacts open on temperature rise at a predetermined (450F) temperature to de-engergize the circuit. Contacts automatically re-close as the device cools to a pre-determined (410F) temperature.

Contact Rating: Life Cycles 100,000 Cycles = 30VAC/DC@5A, 125AVC@2.5A, 250VAC@1

Contact Rating: Life Cycle 5,000 Cycles = 30VAC/DC@7A, 125VAC@6A, 250VAC@3

Ambient Temperatur Range: -80F to 550F (-62.2 Cc -287.8C)

Case: small metal disc 15.3mm D round on a oval base with 24mm mount centers, 2 teflon lead wires 4-3/4" long.

Overall 9.0mm tall max.

Inventory has either White or Blue Teflon Lead Wires,

Additional: https://www.sensata.com/sites/default/files/media/documents/ourproducts_Thermostat_4344_datasheet.pdf

Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment •  Automotive  • Microwave ovens

Proudly Made in USA

 

 

Learn More

HONEYWELL Micro Switch - 26PCCFA1D Presure Sensor, PCB Mount.

The 26PC Series Miniature Pressure Sensors are small, cost-effective devices intended for use with wet or dry media. These sensors feature proven sensing technology that uses a specialized piezoresistive micromachined sensing element to offer high performance, reliability, and accuracy. Each sensor contains four active piezoresistors that form a Wheatstone bridge. When pressure is applied, the resistance changes and the sensor provides a milliVolt output signal that is proportional to the input pressure. The low power 26PC sensors are designed to accommodate pressures from 1 psi to 250 psi and have an operating temperature range of -40 ºC to 85 ºC [-40 ºF to 185 ºF].

Status: Discontinued

Pressure Range: Differential, 0-15 PSI

Seal Material: Flurosilicone

Pressure Type: Straight Port

0-100MV Output.

Non-Temperature Compensated Output

Silicon Sensor Chip

10-16VDC.

Dimensions: 1.35 Lx 0.5W

Operating Temperature: -40 C to 85 C

Gage 0.86 L, 4-leads.

Applications: Medical, Industrial, & Commercial.

More Information: https://sensing.honeywell.com/honeywell-sensing-trustability-board-mount-pressure-sensors-tsc-nsc-datasheet-50064366-d-en.pdf

Proudly Made in USA

Learn More

HEDLAND - 526-002-DCR - DC Flow-Alert Flow Limit Switch, 1A @ 24VDC

This is the Flow Limit Switch for EZ-VIEW FLOW METERS (Not Supplied) - using Hall Effect-triggered (Normally Open) Relay hermetically sealed in encapsulating compound, within Polysulfone module. The Relay, when Activated, is designed to directly control warning lights, alarms or digital inputs. WHEN CONNECTED TO THE FLOW METER (NOT SUPPLIED) The Set Point is: 0 - 100% of full scale 1-1/4" ID for Flowmeter

Supply Voltage: 9-24 VDC

Supply Currrent: 90 mA

Contact Rating: 1A @ 24VDC

Set Point: 0-100% of Full Scale

Operating Temperature: 32-158F

Includes Installation Instructions

Factory New

Learn More

Electronic Pressure Monitor LED Display - 1/4"NPT - Instruction sheet included - Adjustable Hysteresis - Switching Output DC PNP N.O. / Closed programmable - Measuring Range 0-100 PSI - Requires 18-30VDC at 250mA - Bursting P 2000 PSI - Has programming buttons - 34mm x 92mm x 48mm - New CE UL CSA GL Made in Germany Learn More

Elmwood Sensors Inc - R1-354 F190 Thermal Switch, Normally Open, Pre-wired with an inch of fine braided wire on each side. Dimensions: approximately 0.6" D x 0.54" high.

Learn More

Cutler-Hammer Opcon / Eaton - 9501AS-2005C1 - 108126-008 - 7872001300 - Photoelectric Sensor Control

Photoelectric sensors use light to detect the presence or absence of an object. The main advantages of photoelectric sensors are noncontact sensing of objects and greatly extended sensing ranges.

AGV Sensors – The eyes and ears of mobile robots

Proximity Sensor (Near T0 20-Inches)

WIDE-BEAM 20-32VDC

Open Collector NPN 

Input Voltage: 20-32 VDC

Response Time: 30 mS

Current Sinking

W/ 30" CABLE & 4-Pin MS3106F14S-10S Conn (Removeable)

Detects Light & Dark objects easily

By-OPCON Full Spex with Each Sensor

NEW IN A WHITE NEMA 1 - 4 ENCLOSURE

Overall Dimensions: 4.625" Long, 2.00" Wide, 2.75" Depth

Cable Length: 30"

Operating Temperature: -40 to 140F (-40 C to 60C)

Nema: 1,4

EATON and CUTLER-HAMMER

UPC 1072113905448, 72-1139-0646

Made in USA

New Old Stock in Manufacturer's Packaging

Learn More

Photo-resistive cell. Resistance: 28K Ohm-light, 18.7Meg Ohm-dark. Peak spectrol response: 5500. Max voltage peak: 100V. Dissipation: 125mW at 25 Deg C. Package: TO-39 hermetically sealed. Operating temperature: 75 Deg C. Learn More

Cherry Electrical Products - ZF Electronics - HE61-5000 - GS100701

Note: Cherry Electrical has since been acquired by ZF Electronics. 

Magnetic Hall Effect Sensor Ferrous Metals, Gear Tooth Digital Wire Leads Barrel, Aluminum.

12mm threaded barrel, 26mm long with mounting nuts

Power Supply:  Vcc 24V

Output On Current: Isink 20mA

Temp. Range:  -40 to 150 C

Operating Frequency: 15KHz.

Air Gap 2.032mm: Output Digital 

Alternates: CH398, GS100701

Applications:  Speedometers, Anti-lock braking systems, Exercise equipment, CNC machine tools

Learn More

Pressure gauge/transducer. -0.43 to +1.56 PSIG. Zero to 5000 Ohm in one second. Package: stainless steel. Learn More

Banner Engineering Corp - SM312FQD - Mini-beam infra-red fiber optic sensor, self-contained.

Useable in opposed, retroreflective and diffuse fiberoptic modes with Banner glass fiberoptic assemblies. Switch selectable light or dark operate; 1mSec response. Both sourcing and sinking outputs. Interchangeable with 18-mm barrel type photoelectrics.

10-30VDC-Operation.

Contact Current Rating: 150 mA

Max Operating Temperature: 70 °C

Max Output Current: 150 mA

Max Supply Voltage (DC): 30 V

Min Operating Temperature: -20 °C

Min Supply Voltage (DC): 10 V

Number of Conductors: 4

Output Current: 150 mA

Compliance: CE, CSA, IEC, UL

Useable in opposed, retroreflective and diffuse fiberoptic modes with Banner glass fiberoptic assemblies.

Switch selectable light or dark operate; 1mSec response.

Both sourcing and sinking outputs.

Interchangeable with 18-mm barrel type photoelectrics.

"QD" option for quick disconnect 4-conductor DC cables.

Learn More

Sensor, hall effect. Latch, 4.5 to 18V in, 5mA. Maximum operating switch point 150 gauss. Package: TO-243AA (TO-92 style). Note: "stamp-AUGN3177 Lot#CP238030B1". Learn More