Motors

Eastern Air Devices - LA23ECH-27 - Motor, Stepper.

2 Phase

1.4VDC 1.9Amp

1.8 Deg/Step.

Torque: 35 in-oz (2.45 kg*cm)

Steps/Revolution: 200

4 Wire, 11" Leads.

Oval Mount: 66.5mm centers.

Dimensions: 57.5mm D x 52.4mm deep, plus 6.3mm flatted shaft 11mm long.

Alternate P/N: 400-0072.

Genuine Eastern Air Devices - New Old Stock

Proudly Made in USA

Learn More

Pancake style motor 1/4HP 625RPM 115V 60Hz 4.4A 1ph. CCW rotation. Requires a 20uf 236vac cap. (not included). 6 wing mounting. app. 11"from tip to tip. App. 5"high. Fan duty LR11447. Learn More

EMERSON - DXE340C - Motor, Servo. Supply: 240V 3-Phase Brushless. Supply: 240V 3-Phase Brushless. Current: 4.0 Amp. Speed: 4.000 RPM 0.57kW. 0.76 HP. Wire count: Two MS connectors. Mech. Mtg.: 4-hole 0.22"ID 2.74"spacing. Body Dimensions: 3.324" square x 7.36"L plus keyed shaft. Weight: 8 lbs E171950 New – Made in USA Learn More

Motor, AC. Voltage: 208-230/460 60Hz; 380 50Hz, 1.5HP. Phase: Three-phase. Shaft Speed: 3600RPM. Continuous Current: 2.00 to 4.20 Amps. Severe duty, corrosion resistant & chemical duty paint, fan cooled. Frame 143T WT.60#. Encl. TE-1P55 Learn More

Motor, AC. Supply: 440VAC 60Hz. N/P Current: 3PH 0.6Amp. Speed: 26 RPM. Torque: 180. Horsepower: 1/12HP. Note: Frame 3275, Class A, MFG NO A, E49286, 105.974-1. Gearmaster. Gearcase-motor. Note: Military NSN 6105-01-067-6701. Learn More

Encoder, rotary. Bidirectional. 10 Pulse/Rev, 5-26V. Mount: 4 holes = 6/32 UNC-2B threads x 0.187 deep, with 50mm centers. Dimensions: approximately 57mm square x 57mm high. Shaft: 3/8" single ended. 5 Pin male MS connector. Complete with manufactures wiring instructions and guidelines. Qube. Learn More

Danaher Motion - Thomson Industries - 266-6-0733

Collar Subassembly Kit 8ST CB6 SKID 6,OBS.

 

Learn More

Motors, servo. Dual shaft. Mounted on a plate, has a bit of white "stuff" on it . Dimensions: 6.75" long, motor is 2.25" D. Sold as is. Learn More

CONTROL TECHNIQUES WORLDWIDE - DXM4120WB - Motor, Servo. Brushless. Supply: 3PH 240V 16A. 3-Phase Brushless. Speed: 3000 RPM. HP: 4.25. Shaft Type: Keyed Power: 3.17 kW, 4.25 HP Wire count: Internal Connections. 960129-11A4 Class: F. UL-E171950. Used / Removed from Equipment. Made in USA Learn More

BOWMAR-HAROWE - 83036-01 Motor, DC Permanent Magnet.

Supply: 3-18VDC.

Direction: reversible 4-pole.

Wire count: eight teflon wires.

Mech. Mtg.: 2 flush mount brackets on the bottom.

Shaft dimensions: partially threaded 0.123"D shaft is 0.43"L.

Note: With optical tachometer, no spec available.

Very high efficiency for popular daisy wheel printers.

Learn More

Buehler - 10075875 Motor, DC.

Supply: 6-24VDC.

Note: Permanent magnet with tach.

High speed, reversible, 4 wire with a 4 position female rectangular connector.

Learn More

Rotary Optical Encoder. Incremental. Insta-Mount. Enclosed, complete with attached 5 conductor shielded cable, single ended. Dimensions: 2.125" D round x 1.045" high with 2 hole mount 1.812" centers. More info: http://www.beiied.com/PDFs2/MX21.pdf Learn More

BALDOR - M3454 - Motor, AC.

Baldor Electric, M3454, .25HP, 1725RPM, 3PH, 460V;230V, 48 Frame, Standard Flange, Foot Mount, TEFC, General Purpose Motor

3PH 208-230/460VAC 60Hz

1.4A- 1.3A/ 0.65Amp

1/4HP, 1725RPM.

Frame 48.

Electrical Spec: 34WG0895

Note: Class B. (208V 1.7Amp).

New Old Stock

Learn More

Motor, AC. 1PH 1/6HP 115/230V 60Hz 4.6/2.3Amp, 1140RPM. Frame: 56C. Enclosure: TEFC. Note: Useable at 208V 2.6A. ALT P/N: 34C63-5612. Weight 23 lbs. Learn More

AO Smith - DA3D209 1/20 HP SHADED POLE MOTOR

115/230VAC 2.8/1.4A.

1050RPM SINGLE PHASE MOTOR

SLEEVE BEARING

3/8" x 3 1/8" SHAFT

5" DIAMETER

ROTATION. CWSE

WT. 8.5 LB.

GE 21 & 29 Frame Replacement

(MANUF. A.O. SMITH)

Applications: Refrigeration & Unit Heater

Alternates: 604, F47HXDGT1828, D494, 2311, 2312, 2321, 2322, 5KSP29BG3051, 5KSP29BG3052, 5KSP29BG3053, 5KSP29BG3054, DA3D209, DA3D211, DA3F076

Learn More

Step Motor Driver, Single Axis, Unipolar, 120 VAC Input, 95 volt operation, Adjustable Kick current: 1A - 7A. Connections.Enclosed. Mount: Panel, flange 5-1/2" long x 7/16" wide with 4" centers. Unit dimensions: 6-1/8" long x 6" wide x 5-1/8" high, Connections for clock and control inputs and motor outputs on 13-pount disconnectable terminal block. Learn More

Philips AIRPAX - S-A83709-M4 Motor, Stepper.

12VDC 15 Deg/Step

0.4 Amp/Phase IMP-Protected.

6 Wire.

Shaft: 0.25" D x 0.7" long.

56mm diameter x 23mm thick.

Mounting slots on 68mm centers.

Six 4" leads.

Shaft: 0.25" diameter x 0.75" long.

C/N 1218676-00

Made in Singapore

Digital P/N: 70-18658-00

Learn More

ALLEN BRADLEY - AB - 1336S-BRF75-AA-EN-HAPL6E - DRIVE 7.5HP 0-400Hz 380/460VAC, Used Status: DIscontinued 1336-PLUS Drive - Input: 380/460V 50/60Hz OUTPUT: 0-to-460VAC @ 0-to-400Hz English Language Module 1336S-EN(A)3.01 has 1336-L6E 115VAC board - has standard Keypad with LCD display Additional Information: http://www.ab.com/catalogs/e114/plus2_30.pdf Dimensions: 12.5"x10"x8"deep Weight: 24-pounds, before shipping. 28pounds with packaging MOTOR/CONTROLS Used, Excellent Condition - Removed from Like New Equipment Sold As Is with 30-day Right of Refusal. Learn More

ALLEN BRADLEY - AB - 500F-FOJ930 - Contactor Contactor, Size 5, 3-pole, 24 VAC coil, 270A AC continuous rating, 500 MCM terminals included. Voltage type for actuating: AC Rated control supply voltage at AC 50 Hz: 110 V Rated control supply voltage at AC 60 Hz: 120 V Type of electrical connection of main circuit: Screw connection Service limit current rating: 311 A Continuous current: 270 A Heat dissipation: 19.8 W Circuit closing inrush current peak including offset, max: 3163 A NEMA size: Size 5 Pole configuration: 3 power poles with 1 NO auxiliary contact Operating volt amperes burden: Sealed: 96VA, 60 Hz coils (series L) Hp rating, max 75 Hp @ 230V load voltage, 3-phase (plugging and jogging duty) Transformer primary switching kVA rating: 94 kVA @ 460V load voltage, 3-phase (inrush current ≤20 times continuous current) Modular version: Yes Coil operating limits: 85 % Factory New Learn More

Contactors, 3-pole, 600V/50A rated, Normally-open auxiliary contact, 24VDC Coil. Used/removed from equipment. Learn More

FILNOR INC. - 9857-FH80 1.03-Ohm - Grid Resistor, 80 Amp, Class 9857.

Number of Taps: 10

Drawing Number: R27189

Class 9857 - Stainless Steel Grid Resistors
• Standard grid resistors in stock to reduce costly down time
• All units are insulated for 1000 volts AC or DC
• Reliable stainless steel resistor elements and terminals
• Standard 26.5” dimensions for quick replacement of otherbrands
• Stable resistance over wide temperature ranges
• High wattage saves space, weight and cost

Silicon Bonded Mica Insulating Washers -Higher Temperature rating than epoxy bonded.

End Frame Insulator -Molded fiberglass material is used to insulate the connection
between the support rods and the end frame. This allows for the grid structure to be held securely together and double insulated to ground.

Support Rods - Threaded support rods are insulated with silicon bonded mica tubing to provide primary protection from grounding/shorting out.

End Frames - Filnor endframes are designed so that the resistors can be mounted in racks or stacked.

Dynamic Braking Stainless Steel Grid Resistor - stamped grid, chomium alloy stainless steel grid resistors - Reliable stainless steel resistor elements and terminals - 8 evenly spaced taps.

Dimensions: 26.5" X 12" X 6".

Applications: • Crane Control • Dynamic Braking • Neutral Grounding • Harmonic Filters • Mining Equipment • Transit • Load Banks • AC and DC Motor Acceleration

Made in USA

Learn More

Bison Gear & Engineering - 170-205-0016 - Pulse Width Modulation  (PWM) DC to DC Controller, 10-32V.

Bison's DC in/DC out PWM chassis drives include inhibit for remote starting and stopping, a power LED, and trimmer pot adjustments for minimum speed, maximum speed, acceleration, IR comp, and current limit. All trimmer pots are non-interactive making calibration quick and easy. Can be used in a variety of applications including: Food Processing, Packaging and Labeling, Machine Tools, Medical Equipment etc., Bison Gear and Engineering motors, gear motors and reducers can be used in a variety of industries and applications including: Food Processing, Packaging and Labeling, Machine Tools, Medical Equipment, Exercise Equipment, Conveying, Ag and Construction, Printing, Commercial Doors and Gates.

Input Voltage:   10-32VDC

Speed Control Ref. Voltage:         DC-DC PWM

Output Voltage VDC:      Up to 95% of Input VDC

Form Factor:      1.01

HP Rating:           1/4 - 1/2

Output Current: 16 Amps

Speed: 88 RPM 

Mounting Style: Chassis - Dimensions: 6" Height X 8.0" Width X 10" Length, - Weight 3 pounds  

Control Type:     Pulse Width Modulation (PWM)

Factory Packaged with User Manual. 

Reference: https://bisongear.com/media/product_downloads/literature/205_0016.pdf

Made in USA

Learn More

200-Steps/Revolution 5.3VDC 1.6A STEPPER with 8-wire RENCO ENCODER Model#77678-045 "Connect per 225373" 2.25"OD x 6" including 1/4" [6.3mm] x 18.8mm shaft - 47mm mounting centers, 56.6mm sq flange Learn More

Armature hub PB/TB-1525 ND. Approx 4"ID and 9.5"OD. Weight: 9 lbs. More info: http://www.warnernet.com/PDF/PB1525F.pdf Learn More