Motors

1/4-1/3-1/2HP 230VAC THREE SPEED MOTOR 1050RPM sleeve bearing double shaft Learn More

Motor, AC. Reversible. Induction motor 115VAC 0.22Amp, 1800 RPM 50/60Hz. CW. 4 Wire. Dimensions: 3.27" D x 3.375" high. Plus - Shaft: 0.235" D x 1-1/16" long. Capacitor required: 2uF, not included. The rotational direction is based on the connections of the two windings and a 2 microfarad AC-rated phase-shift capacitor. The two windings are color-coded with black and green wires. The run winding leads are black. The phase-shift winding leads are green. There are no polarity markings on the leads. Rotational direction is trial-and-error. We have no manufacturer�s data on the motor beyond the nameplate. The following procedure works. To get the motor to run: Connect one black and one green lead to one side of an AC line cord. Connect the other green lead to one side of a 2 microfarad AC-rated capacitor. Connect the other black lead to the other side of the capacitor and the other side of the AC line cord. Plug in the AC line cord and note the rotational direction. If it is the way you want it you have the proper connections. If the rotational direction is not what you want, switch the two green leads, without changing any of the other connections. The motor will now rotate in the opposite direction. Learn More

Motor, Slo-Syn Stepper, Bipolar. Supply: 3.5VDC. N/P Current: 5.0A. Winding Res.: 0.7-ohms 9.2mHy. Steps: 200 steps/Rev. Torque: 760 Oz-In. Direction: Reversible. Wire count: 4 terminals. Mech. Mtg.: NEMA 42. Body Dimensions: 110mm frame. Ratings are for series connections. Used. Learn More

Motor, Slo-Syn Stepper with Encoder. Supply: 3.21VDC. N/P Current: 5.1A. Steps: 200 steps/Rev. 3-Stack. Winding Res.: 0.629-ohms 8.31mHy. Torque: 1155 Oz-In [816Ncm]. Motor Wire count: 4 wire leads. Encoder wire count: 8-wires. Body Dimensions: 85mm/3.53"square x 6.25"L. NEMA 34. Shaft: 0.50"D flatted shaft 1.1"L. 9 lbs. Used as demonstration model only, no marks on mounting face plate. Learn More

Motor, stepper. Slo-Syn. Supply: 3.48VDC. N/P current: 3.25A. Winding res.: 1.07-ohms, 11.2mHy. Torque: 770-Oz-In [554Ncm]. Wire count: 4 wire leads. Weight: 7 lbs. Used. Learn More

Motor, Slo-Syn Stepper, Bipolar. Supply: 2.6VDC. N/P Current: 4.0A. Winding Res.: 0.65-ohms 14.6mHy. Steps: 200 steps/Rev. Torque: 2000 / 1200-Oz-In. Direction: Reversible. Wire count: 4 terminals. Mech. Mtg.: NEMA 66. Body Dimensions: 165mm frame. SPEC.A213803. Ratings are for bipolar connections. Learn More

Slo-Syn Inertial Flywheel. Dimensions: 3.99" D x 1.78" deep. For 0.35" shaft. Weight: 3.918 lbs. Learn More

Motors, stepper. SloSyn synchronous 3.47VDC, 2Amp, 200S/R. Hold: 325 oz in. Attached encoder 220022/219273, 500PPR with a DB9 female connector.Motor case: mount 3-1/4" square with 3-3/4" mt ctrs x 4-5/8" long body. Shaft: 0.380" D x 1-1/8" long. Connections: 4 conductor foil shieled cable plus ground wire. Learn More

Motors, stepper. 4.2V, 1.9Amp, 200S/R, Hold: 100 oz in. 64Deg rise. NEMA 23, 2-stack. Case: 2-3/16" square mount with 2-1/2" ctrs. 1/4" shaft x 3/4" long.Connections; 8 pin male header with mating female socket included. Learn More

SIEMENS - 3RP1511-1AP30 - ON-DELAY RELAY

0.5-10Sec 24V/240V.

Only 0.89" wide 1-NO 1-NC -

Guaranteed Functional

Usede / Removed from Equipment

Learn More

SERVO - 77454 1063-1 Motors, AC.

Input Power: 115/200VAC 60HZ

Spped: 1300RPM

Power: 12 watt.

Torque: 1.1 Oz In.

Splined shaft.

Capacitor 0.8uF required, not included.

Learn More

SHINANO KENSHI - STH-39D249 - 6 Wire Stepper Motor.

Status: Discontinued

Dimensions: 39mm Square x 37mmD.

NEMA Size 14

4.7mm Flatted Shaft 24mmL.

1.8 Degree per Step

7.1-Ohm Coils

6-long Wires.

New

Made in Japan

Learn More

Three Speed Shaded Pole Motor 115V 7.0-4.4-3.6Amps Rotation:CCWLE 1/2"shaft 4.75"Long Learn More

Encoder, Rotary. 3600-Pulse/Rev 12VDC. 122mmD x 140mmL with 0.6"[15mm] flatted shaft 1''Long. 5-Inch [127mm] Flange mount. Learn More

Rotary shaft encoder. Learn More

Motor, controller. VariSwitch, variable limit controller. 21~36VDC Input - Requires handheld control box with EEPROMs, not included. Protective wiring paper seal still in place. NIB. S/N 12601242. Learn More

Bearing unit. Each with 6202DU seal. Learn More

STEPPER MOTORS REV 5V 1AMP 0-150PPS REV 0-375 RPM 8-wire mounted on L-shaped bracket 4.235 x 3 x 2"D double flats on 6.7mm 1/4" shaft12mm long 70mm dia x 43mm deep 2-poundsRemoved from equip. Learn More

200-230/460V 5.5/2.7FLAmps 3-Phase 60Hz 1140-RPM SF:1.0 OR 190/380V 4.8/2.4A 50Hz 950-RPM CODE:J Encl:OPEN CONT DUTY - Auto Thermally Protected - Ball Bearing - Keyed & Flatted 5/8" Shaft 5" Long.NEMA-56Y Learn More

Motor, AC. 3 Speed 1/8, 1/12, 1/4HP 277VAC, 1075RPM. Sleeve bearing. Double shaft: 9” x ½” x 9”. Capacitor required 5uF (MFD) 370VAC, not included. Learn More

Century AC Condenser Fan Motor - PolyPhase 3/4-HP 200-230/460V 60/50Hz 3.4-3.1/1.55Amps Frame:T56Y type:SC Flatted & Keyed 6" long Shaft 0.69"OD SF:1.00 Continuous Duty - Shaft Up AOM: 50Hz 950-RPM Approx 6.5"OD x 8.5"LongNEMA-T56Y Learn More

1/2HP 1075-RPM 460V 60Hz 1-Phase 1.6Amp Ball-Bearing 1/2" Shaft flatted twice x 6" Long. 10uF 370VAC Cap required (supplied) A.O.Smith: FEH1056S MagneTek: HF3L7089N Universal Electric - Thermally Protected. Learn More

Control, motor. 120V/60Hz. PKZM0-1Series-02 0-63-1.0. Trip-adjust 1A 50/60Hz. Rotary switch manual control with SE00-11-PKZ0 1-NO and 1-NC. 110V/50Hz 120/60Hz in original box. Learn More

KG - Japan - TS3324N E14 - Motor, Servo. AC.

40 Watt.

Torque:1-kg/cm

Shaft: 8-mm Spline Shaft.

Dimensions: 43mm D x 106mm long, including shaft.

Mounts with two threaded holes 47mm apart with 32" cables and plug to mate with JAE SRCN2A21-10S, included.

New.

Learn More