Motors

Oriental Motors - 5GK180KA Motor Gearhead.

Gear ration: 180.

Shaft Angle: Parallel

GK Series = Gearhead.

Assembled in USA

New in Box.

MATSUSHITA - MHT-5AG Motor, DC.

4.5VDC - 6.5VDC.

Good hobby motor -Formerly used in Tape Deck Console and elsewhere.

Made in Japan

MABUCHI - FM13 (2280) RTMC-125-19316 - Hobby Motor

FM13 Miniture Flat Frame Motor, DC.

Reversible, Can be used in either direction by reversing polarity

3 Pole Permanent Magnet.

1.5-3VDC, model 2280 winding

Motor Performance at 1.5 VDC is no load speed 8000 RPM

No Load current 450mA

Stall Current is 1900 mA.

Dimensions (not including shaft) 24mm Long, x 20mm Wide x 15mm.

Matewrials: Metal & Plastic

Shaft: Diameter 2mm by 6.5 mm.

Weight 17 grams (9.6 Oz).

Used in Race Track Slot Cars, Electric Shaver/Razor, Hobby Toys & Instruments. 

New Old Stock

Made in Japan

Johnson Electric - 1030361 - Series 395 DC Motor and Controller Assembly.

Johnson Electric is the industry benchmark for micro motor driven actuation. PCB provides steady current source for small motors have uneven loading characteristics.

Low Noise high Torque Series 395 Three Pole Brush Motor

Front Face Mount: Motor has Two M3 Mounting Holes, Distance 16mm apart

Motor Diameter: 29mm, Total Length including shaft is 50mm

Shaft Diameter:2.3mm with Nine Tooth Gear. 

PCB Measures 1.280" X 1.630"

Power Input: 7.2 VDC on Two Gold PCB Terminal Studs

Power Output: Two 1/8" (0.125") Quick Connect Connectors

PCB is a Super-Capacitive Drive Assembly.

7.2VDC input is paralleled with 3 series connected Super-Caps (10F @ 2.5VDC each) to total 3.3 F of capacitance @ 7.5VDC).

Each of the three Super Capacitors manufactured by Maxwell (PC10-270 Series) is rated 10 Farad 2.5 VDC. Supercapacitors are used for energy storage undergoing frequent charge and discharge cycles at high current and short duration or applications that require pulse power.

There are also three switches: One SPDT (On/Off Toggle) and Two SPST KW12-2 Microswitches rated 3A@250 VAC & 5A@125VAC.
High brightness LED illuminates when energized.

Note: With the PCB charged to 7VDC, the LED will remain brightly illuminated for greater than 10 minutes.

Motor Assembly removed from "New" from Never Used Battery operated commercial Cutting Tool.

Applications: Student & Science Projects. Great for disassembly and use of Motor, Capacitors, Switches and Super Bright LED.

Note: See SKU 156914 for purchase of the Superior Tool Smart Charging Station and two - 7.2 VDC Nickel -Metal Hydride Battery Pack that was used to power this cutting tool motor. That purchase includes a 15V 900mA Wall mounted transformer.

Note: See SKU 177165 to purchase just DC Motor. 

Note: See SKU 177166 to purchase Just PCB controller

HITACHI - HA13406W - IC - Three-Phase Brushless Motor Driver.

Output Current: 3 Amp @ 12V Per Phase

Low Output Saturation Voltage

Over temperature Protection

Low Thermal Resistance Package

Includes Hall Effect Sensor Amps, Logic, Output Amps and Control Amps.

Can be used with many motors using hall effect sensors for speed control.

Case: SP-23TA

Power SIP Right Angle Leads.

Genuine Vintage Hitachi - New Old Stock

Made in Japan

Franklin Electric - 150 1500 402 Electric Pump Motor

1HP 208-230, 240-480VAC, 50/60HZ

Continous Duty Cycle 

FLA: 5/2.5 Amps

Single Phase Motor

Reverseable

980/1075 RPM

CAT 13868

Insulation B

KVA Code E

Mounting Frame 56

Shaft-Hmpe Special

Type N Thermally Protected - Auto Reset

Keyed Shaft

New Old Stock

Proudly Made in USA

General Electric - CR101H400H - Manual Motor Starter.

Enclosure NEMA 4

Number of Poles 2

Number of Thermal Units 1

Current Rating: 16 Amperes

Type:     Full Voltage

1 Phase HP/Volts: 1/4 HP at 32 VAC, 1 HP at 115/230 VAC, 3/4 HP at 277 VAC 25 to 60 Hz

Dimensions: Length 2 3/4 Inches, Depth 4 9/16 Inches, Width 4 1/4 Inches

Weight: 3.75 lbs.

1 HP Maximum

Toggle, With Handle Guard/Lock Off.

Genuine General Electric - Factory New Old Stock

DYNAPAR / DANAHER - E1103601200 - Encoder, Rotary.

The Series E12 is a ultra-miniature incremental optical encoder packaged for commercial and lighter-duty industrial applications. Its small size is ideal for confined spaces with a resolution from 100 - 1024 PPR with an optional index.

Rugged Metal Housing - Sub-Compact 1.2” Diameter - Up to 1024 PPR with Optional Index

Incremental 360-PPR.

Input: TTL (+5VDC): 135mA max.

CMOS (+12 or +15VDC): 100mA max.

Rugged all Metal Housing.

Mount: Servo Face, 1/8" Stainless Steel Shaft. 5V STD.

Dimensions: 1.2" OD x 1.2" Body Length.

4 Wire plus Braid Shield.

Miniature Size 12.

Factory New Complete with Manufactures Wiring Instructions and Guidelines.

Eastern Air Devices - LA23ECS-36 - Stepper Motor

1.9VDC 2 Phase 3Amp 1.8 DEG.

Stepper Motors 4-Wire

Dimensions: 57mm Dia x 52mm deep plus additional 6.3mm [1/4"] Shaft 18mmL.

Nema 23

IP40

Weight 18oz.

Motor has a 7" long 4-Cond wire and connector.

Square Mount 47mm Ctrs.

Genuine Eastern Air Devices - New Old Stock

Made in USA