Motors

Electric Motors

Electronic Surplus distributes electric AC and DC motors. Depending on the powered needed to operate your equipment, you’ll want to decide which electric motor works best for your needs. For instance, an AC motor replacement is ideal for someone who requires a powerful source of energy for an extended period of time. On the other hand, a DC motor is essential for purposes that can adjust the level of power more regularly.

If you’re unsure which electric motor for sale is right for your needs, contact us. We’d be more than happy to discuss it with you. If you already know what suits your needs, take a look at our selection of surplus motors below.

Filter  
Category  
Contact Configuration  
Common Voltage  
VAC  
Manufacturer  
Amperage  
Unit of Measure  
Price  
View as List Grid

Items 121-144 of 319

per page
Set Descending Direction
  1. Packard Electric - 82722 - Three-Speed 1050-RPM 1/5-1/8-1/10HP
    Packard Electric - 82722 - Three-Speed 1050-RPM 1/5-1/8-1/10HP
    $145.88
    Three Speed Shaded Pole Motor 115V 7.0-4.4-3.6Amps Rotation:CCWLE 1/2"shaft 4.75"Long Learn More
  2. ONO SOKKI - RP-132D0-T1 - Rotary Encoder 3600-P/Rev 12VDC.
    ONO SOKKI - RP-132D0-T1 - Rotary Encoder 3600-P/Rev 12VDC.
    $374.95
    Encoder, Rotary. 3600-Pulse/Rev 12VDC. 122mmD x 140mmL with 0.6"[15mm] flatted shaft 1''Long. 5-Inch [127mm] Flange mount. Learn More
  3. NSD CORPORATION - Japan - VS-2-1MP-02 - VariSwitch, Variable Limit Controller.
    NSD CORPORATION - Japan - VS-2-1MP-02 - VariSwitch, Variable Limit Controller.
    $600.00
    Motor, controller. VariSwitch, variable limit controller. 21~36VDC Input - Requires handheld control box with EEPROMs, not included. Protective wiring paper seal still in place. NIB. S/N 12601242. Learn More
  4. N.A. PHILIPS - K82924-M2 - Stepper Motor 5V 0-150PPS REV 0-375 RPM
    N.A. PHILIPS - K82924-M2 - Stepper Motor 5V 0-150PPS REV 0-375 RPM
    $12.95
    STEPPER MOTORS REV 5V 1AMP 0-150PPS REV 0-375 RPM 8-wire mounted on L-shaped bracket 4.235 x 3 x 2"D double flats on 6.7mm 1/4" shaft12mm long 70mm dia x 43mm deep 2-poundsRemoved from equip. Learn More
  5. Magnetek - 596 - Motor, AC. 3 Speed 1/8, 1/12, 1/4HP 277VAC, 1075RPM.
    Magnetek - 596 - Motor, AC. 3 Speed 1/8, 1/12, 1/4HP 277VAC, 1075RPM.
    $65.00
    Motor, AC. 3 Speed 1/8, 1/12, 1/4HP 277VAC, 1075RPM. Sleeve bearing. Double shaft: 9” x ½” x 9”. Capacitor required 5uF (MFD) 370VAC, not included. Learn More
  6. MAGNETEK - 8-181965-00 - 3/4HP 200-230/460V 1140-RPM PolyPhase Century
    MAGNETEK - 8-181965-00 - 3/4HP 200-230/460V 1140-RPM PolyPhase Century
    $129.00
    Century AC Condenser Fan Motor - PolyPhase 3/4-HP 200-230/460V 60/50Hz 3.4-3.1/1.55Amps Frame:T56Y type:SC Flatted & Keyed 6" long Shaft 0.69"OD SF:1.00 Continuous Duty - Shaft Up AOM: 50Hz 950-RPM Approx 6.5"OD x 8.5"LongNEMA-T56Y Learn More
  7. MAGNETEK - 790 - 1/2HP 460V 1-Ph Permanent Split Cap Motor
    MAGNETEK - 790 - 1/2HP 460V 1-Ph Permanent Split Cap Motor
    $89.78
    1/2HP 1075-RPM 460V 60Hz 1-Phase 1.6Amp Ball-Bearing 1/2" Shaft flatted twice x 6" Long. 10uF 370VAC Cap required (supplied) A.O.Smith: FEH1056S MagneTek: HF3L7089N Universal Electric - Thermally Protected. Learn More
  8. KG - Japan - TS3324N E14 - Motor, servo. AC. 40 Watt.
    KG - Japan - TS3324N E14 - Motor, servo. AC. 40 Watt.
    Special Price $98.98 Regular Price $150.00

    KG - Japan - TS3324N E14 - Motor, Servo. AC.

    40 Watt.

    Torque:1-kg/cm

    Shaft: 8-mm Spline Shaft.

    Dimensions: 43mm D x 106mm long, including shaft.

    Mounts with two threaded holes 47mm apart with 32" cables and plug to mate with JAE SRCN2A21-10S, included.

    New.

    Learn More
  9. FUJI ELECTRIC - SM35-2006B - Motor, stepper. 13VDC 4-wire 35mmD
    FUJI ELECTRIC - SM35-2006B - Motor, stepper. 13VDC 4-wire 35mmD
    Special Price $7.98 Regular Price $15.95
    READY TO SHIP - ONLY 56 LEFT IN STOCK!

    FUJI ELECTRIC - SM35-2006B Motor, stepper.

    Supply: 13VDC.

    Coil Resistance: 38 ohm.

    Direction: Reversible.

    Wire Count: 4-Wire.

    Mech. Mtg: Slotted Flange with two slots 42mm spacing

    Body Dimensions: 35mm dia x 21mm deep.

    Shaft: 1.9mmD 7.5mmL.

    Note: Fuji Electrochemical Co - Japan.

    Learn More
  10. Franklin Electric - A-86 - 1/2HP 115V 1725-RPM Reversible BLOWER Motor
    Franklin Electric - A-86 - 1/2HP 115V 1725-RPM Reversible BLOWER Motor
    $295.00
    1/2-HP Continuous Duty - Class A Insulation, Split Phase - sleeve bearing , resilient mounting, Open dripproof, Auto Reset for Overload, Rev Rotation, Frame:48, special shaft 0.5" under 0.62" collett. 440 1140 409 Nice Learn More
  11. Fincor - 5002441 - 9303318TN - Motor, DC. Supply: 180VDC 1/3HP
    Fincor - 5002441 - 9303318TN - Motor, DC. Supply: 180VDC 1/3HP
    Special Price $168.98 Regular Price $200.00

    Fincor - 5002441 -  9303318TN - Motor, DC.

    Status: Discontinued

    Supply: 180VDC.

    Current: 2.1A-Armature, PM-Field.

    Speed: 1725 RPM.

    1/3 HP.

    Frame Size: TENV.

    Note: Class:F Continuous duty.

    Used, has pulley attached.

    9303318TN.

    Fincor. Note: The motor's length from one end to the end of the shaft is 17-inches. The motor's diameter is approximately 5-inches. The mounting centers are 8-inchess (lengthwise) 8-1/4-iches widthwise.

    Proudly Made in USA

    Learn More
  12. Cutler-Hammer - HMCP030H1C - 30Amp 3-Pole 600VAC 250VDC
    Cutler-Hammer - HMCP030H1C - 30Amp 3-Pole 600VAC 250VDC
    $200.00

    Circuit breaker. 3P 30Amp 600VAC 250VDC. Series C. Instantaneous trip settings: 90-300Amps Cu/Al-UL Cu Only-CSA circuit breakers.

    Learn More
  13. CUTLER-HAMMER - SV9F10AC-2M0B00 - 1HP 0-500Hz Motor Controller - Less Keypad /Control Panel
    CUTLER-HAMMER - SV9F10AC-2M0B00 - 1HP 0-500Hz Motor Controller - Less Keypad /Control Panel
    Special Price $98.98 Regular Price $150.00

    CUTLER-HAMMER - SV9F10AC-2M0B00 - 1HP 0-500Hz Motor Controller - Less Key Pad/Control Panel.

    Output: 3-Phase-0-to-Input Voltage 0-500Hz

    I2:4.7/5.6A

    HP: 1.0CT/1.5VT

    Input: 3 - 208-240V 50/60Hz

    3-Phase 4.7/5.6A 

    Nema 1 (IP20)

    Missing the KeyPad/Control Panel.

    CE

    Made in Finland

    Note: Used

    Learn More
  14. CUTLER-HAMMER - AF91AG0BF25D - Adj Freq Drive 1/4HP 208-240V 1- or 3-Phase
    CUTLER-HAMMER - AF91AG0BF25D - Adj Freq Drive 1/4HP 208-240V 1- or 3-Phase
    $275.00
    Motor, controls. Frequency drive, adjustable, 1/4HP Input: 200-240V 1/3-Phase 50/60Hz 3.1/1.8A. Output:200-230V, 3-phase, 1-360Hz, 1.4A-RMS. Style:G1F25BG0DA. Listed: UL CSA AK. Dimensions: 3.3" wide x 5.2" deep x 4.2" high. Weight: 2 lbs. Learn More
  15. CUTLER-HAMMER - CE55ANT3T1B - Reversing Contactor Size A 24VDC
    CUTLER-HAMMER - CE55ANT3T1B - Reversing Contactor Size A 24VDC
    $174.88
    Contactor, Reversing. Size A. Coil:24VDC. 3-Pole open type. Auxilliary: (2) N.C.I.-DC HP: 1.5 at 200/230V, 3A 460V, 5A 575V. 5.2"L x 3.5"W x 5.6"H. weighs 2.5 lbs unpacked. Learn More
  16. BALDOR - CWDM3537 - 1/2HP 230/460 3-Ph 3630-RPM "Wash Down" enclosed
    BALDOR - CWDM3537 - 1/2HP 230/460 3-Ph 3630-RPM "Wash Down" enclosed
    $328.99
    1/2HP 230/460 3-Ph 3630RPM "Wash Down" enclosed TENV FR56C 60Cambient Energy-Efficient - Wash Down / ISR cut leads - 0.644" keyed shaft 2" long continuous duty Learn More
  17. BALDOR - 35B11-372 - 1.5 HP Motor, AC. Supply: 208-220/440V 3-Phase
    BALDOR - 35B11-372 - 1.5 HP Motor, AC. Supply: 208-220/440V 3-Phase
    Special Price $389.98 Regular Price $485.95

    BALDOR - 35B11-372 - 1.5 HP Motor, AC.

    Supply Voltage: 208-220/440V 60 Cycle

    3-Phase, Class A.

    N/P Current: 5.0-4.6A/2.4A.

    Speed: 1725 RPM.

    Frame Size: 56,  520M.

    Catalog: 143154 

    Temperature: 40 C Ambient

    Excellent Condition - Made in USA

    CSA

    Learn More
  18. AUTOTECH CONTROLS - F2N-01024-5TBFE - Encoder. Marked: Resocoder.
    AUTOTECH CONTROLS - F2N-01024-5TBFE - Encoder. Marked: Resocoder.
    $200.00
    Encoder. Marked: Resocoder. Mount: Panel, mount plate 2.654" square with 4 holes at 2.85" centers. Dimensions: body 2.5" D x 3.42" long, plus shaft, mount flange and connector. Shaft: 0.38" D x 0.846" long. Has one 10 Position male circular connector, part number MS3102E18-1P. Used/Removed from equipment. Overall length of unit is 5.75". Note: No other information available. Learn More
  19. Century AO Smith - C770 – 8-177248-02, 1HP 200-230/460V 1075-RPM Moto, New
    Century AO Smith - C770 – 8-177248-02, 1HP 200-230/460V 1075-RPM Moto, New
    Special Price $219.98 Regular Price $285.95
    Century AO Smith - C770 – 8-177248-02, 1HP 200-230/460V 1075-RPM Moto, New CENTURY AC MOTOR C770 A.O. SMITH 8-177248-02 Condenser Fan Motor HP: 1.0 VOLTS: 460/200-230 VAC 60HZ AMPS 2.4/4.8 RPM: 1075 Vertical Frame: M56Y Permanent Split Capacitor Reversible - 25uF 370VAC cap - 5/8" flatted & keyed Shaft 6"long Auto-protected - Class B Moisture Resistant Insulaton Double Sealed Ball Bearing Positioning lugs for belly-band mounting NEMA-M56Y OAO SF:1.0 Weight: 35-Pounds Made in USA Learn More
  20. ALLEN BRADLEY - AB - 1332AAA + W/VF-4-2 - Adj Freq AC Drive 2KVA 0-240Hz
    ALLEN BRADLEY - AB - 1332AAA + W/VF-4-2 - Adj Freq AC Drive 2KVA 0-240Hz
    $495.00
    Adjustable Frequency AC Drive Output 2KVA, 230VAC 3-Ph Adjustable 0-240Hz. FWD/REV with DC Braking - Input 2.7KVA, 230VAC 3 Phase 50/60Hz,. 6.8A. Learn More
  21. HONEYWELL - ML7475A1004 - Direct Coupled Rotary Actuator, Spring Return, 105 LB-In Torque New
    HONEYWELL - ML7475A1004 - Direct Coupled Rotary Actuator, Spring Return, 105 LB-In Torque New
    Special Price $249.98 Regular Price $350.00

    HONEYWELL - ML7475A1004 - Direct Coupled Rotary Actuator, Spring Return

    Floating Control Motor

    Torque: 105 lb in

    Rotation: 90 Deg Rotation, 80 Second Timing. 

    Power Input: 24VAC 50/60 Hz

    Use with 0-10 BVDC Control Input

    Made in Switzerland

    Alternate 9437

    Factory New

    Learn More
View as List Grid

Items 121-144 of 319

per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.