Switches

C & K Components - 7205MY9AGE Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 5Amp 120VAC.

Actuator: (On)-Off-(On).

Connection: PC Right Angle (RA) Trminals.

Mech: PCB. Body: 12.9mm long x 11.4mm wide x 11.0mm high.

Overall with actuator and contacts 31.2mm long.

Note: Center off.

Non-threaded bushing 6.9mm long.

Actuator: 6.9mm long.

Miniature C&K 7205.

Learn More

C & K Components - MG00L1NZQD Switch, Rotary.

Contacts: 1P12T. (1 pole, 12 Position)

Contact Ratings: 125VAC (or 28VDC) Switching 250mA, Carry 6Amps.

Contact: Silver Plated Copper Alloy

Connection: Solder.

Electrical Configuration: Non-shorting.

Continuously Rotating Shaft or Use Stop Ring

Mech: PC, Vertical.

Body: Bushing 0.25" D x 0.243" Long.

Body: 0.511" Diameter x 0.374" High.

Shaft: Flattened 1/8"D x 0.391" Long.

Life: 10,000 Cycles

Sealed IP67

Note: M Series: Half-inch Rotary Switches.

Genuine C&K - Individually Sealed in anti-Static & Non-Corrosive Package

Learn More

C & K Components - 3TMA-4A Switch, Micro. with Roller.

SPDT NC/NC

15Amp 1/2HP 125, 250VAC/ 0.25Amp 250VDC/ 0.5Amp 125VDC/3Amp 125VAC.

Operating temperature: 67 Deg F to 302 deg F (55 Deg C to 150 Deg C).

Double marked: TMCJ4A.

Listed: UL/CSA.

Note: Cam Rotary.

New Old Stock

Learn More

Switch, stepping. Type 44 Switch, 3-deck, 11-position, 1-deck, 10 position, non-shorting wipers, 2 of the 4 decks gold-plated; SPDT interupter contact, 120 ohm coil; will operate switch at 36VDC but rated for 48VDC. In Original Styrofoam box. Learn More

ALPS PN421 - Samwon PPL421 Switch, pushbutton/push switch.

Contacts: 4PDT non-latching momentary. 2 NO and 2 NC

Mechanism design offers acute operation and long service life

Applications: Ideal for mounting on PCB motherboard of many electric appliances

Specifications:

Material: Plastic, Metal

Switch Operation: Latching

Contact Configuration: 4PDT

Terminal Type: Straight Through Hole

Pin Quantity: 12

Each Pin Pitch: 3mm

Position Quantity: 1

Mounting Pillar Distance: 22mm / 0.87-inch

Cap Mounting Part: 6.5 x 3.3mm / 0.26-inch x 0.13-inch(L*W)

Overall Size: 35 x 7.6 x 13mm / 1.38-inch x 0.30-inch x 0.51-inch(L*W*H

New old Stock

Package of 10.

Learn More

ALLEN BRADLEY - AB - 800MS-XOAR Series A - Square Switch, Pushbutton. 1NC, 1NO, Momentary. The ALLEN BRADLEY AB 800MS-XOAR is a heavy-duty pushbutton switch designed for interior use in commercial and control equipment panels. With a maximum amperage of 150mA and a momentary switch action, this push button switch is suitable for a variety of applications. The switch features a white & black button color, making it both functional and visually appealing. Built by the trusted brand Allen-Bradley, this switch offers reliable performance and durability for electrical equipment and supplies. ALLEN BRADLEY now Rockwell Automation Heavy Duty Switch, Pushbutton, Series A Status: Discontinued Current Type: AC 150 VAC Max, 0.15A (150mA) Logic Reed 1NC, 1NO, Momentary Selector Switch. Package: Square. Material: ABS / Thermoplastic Marked Reader / Forward. Series A. Made in USA New in Manufacturer’s packaging with Instructions. Application: Commercial, Control Equipment Panels Additional Information: https://support.rockwellautomation.com/cc/okcsFattachCustom/get/459604_9 Learn More

ALLEN BRADLEY - AB - 800MS-Q24 - Green Pilot Light, 24 VAC/DC.

1.2" Square Face Green Pilot Light is 3/4"wide x 1/2"high

24VAC/DC Lamp#28MB telephone wedge lamp included -

Square pilot light with "IN POS" OR "FAULT" or "HOME"

Name Plates above Green indicator lens.

Mounts in 7/8" dia hole. (22.5mm) 

Learn More

TE Connectivity Alcoswitch - TP21FFGPCO - Switch, Pushbutton

Contacts: Dual SPDT

Two Momentary Switches in one Body.

Contacts: Gold

Contact Ratings: 0.4VA 20V AC/DC.

Actuator Case High Temperatur Polyester

Connection: 6 Pin Dip.

Gold leads.

Mech: PCB.

Body: 8.5mm long x 9.3mm wide x 8.0mm high, plus actuators.

Operating Temperature -22F to 149F (-30C to +65C)

Life expectancy 80,000 Cycles

Note: Subminiature.

New Old Stock

Alternate P/N 3-507.

Learn More

Aerotec - UD-122 - AF33 (600)-24272 Differential Pressure Switch A pressure switch compares the pressure acting on the area of a piston or diaphragm against an opposing spring force. Sometimes the opposing force is the buckling force of a thin disk. A differential pressure switch compares two different pressures acting on opposite sides of the same piston or diaphragm. Differential Pressure Switch AF33 (600)-24272 Military S/N 1204.16-R 3360 - 072834531 AF33 (600)-24272 Packaged: MIL-B131B Class 2 Factory - New Old Stock Made in USA Learn More

OHMITE RCL SW-3244 - 01686 Miniature Rotary Switch

8-Position 1-Pole,

Non-shorting, (Break before make)

Miniature PCB Mount Rotary Switch.

Termination: Gold Plated PC Terminals

Body, 0.5" Diameter x 0.5" long

Ignore the 10 positions implied by the photograph.

New Individually Packaged.

Learn More

Keypad. With a 13 Conductor Flat Flexible Ribbon Cable as Contacts.

This is a basic 12 button keypad that has been designed for easy user input and functionality. The buttons are set up in a matrix format. This allows a microcontroller to 'scan' the 7 output pins to see which of the 12 buttons is being pressed.

Each of the keypad's 12 buttons has been labeled 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, *, and # 

Dimensions: Keypad 2.403" wide x 3.199" long.

Ribbon 1.593" wide x 1.791" long.

Overall 5-3/16" long.

Applications: Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, DVD player, stereo, audio system, computer module, other DIY, etc..

Learn More

J016A1 Keypad. Alpha numeric 12 position Telephone Keypad.

Dimensions: 1-1/2" wide x 1-3/4" high.

Centered on a board, measuring 2-1/4" high x1-1/2" wide.

Learn More

Unidentified MFG - 35ZF12 Switch, Slide.

Contacts: SPDT.

Connection: 3 tiny solder terminals.

Mech: PCB, SMD.

Body: 7mm long x 1.4mm thick x 4mm above board.

Note: MicroMiniature.

Stamped with Roman Numeral 2.

Package of 10.

Learn More

Switch, pushbutton. Contacts: SPDT. Actuator: Momentary. Illuminated. Note: Lens cover: frosted white. No lamp. Label 3-21-300-101. Learn More

AMP - 274-5001-006

Switch, dip.

Contacts: 12 position.

Actuator: raised rocker.

Package: 24 Dip, gold leads.

Package of 3.

Learn More

Unidentified MFG - 180-5054-00 - Switch, Leaf. Pin Ball End-of-Stroke, Normally Open (NO) Gold Contacts. Status: Discontinued - End-of-Stroke Leaf Switch. Overall Length: 3.375” Including Switch Stack and Terminals. Overall Width 0.725” Including Side Terminal. Length of Long Blade from Switch Stake: 1.955” Length of Short Blade from Switch Stack: 1.335” Leaf Blade Width: 0.25”x 0.008” Thick Stainless Steel Switch Block 0.75” Long x 0.375” Wide X 0.30” Thick Standard Mount with 2 Screws (#5) Through-holes: 0.125” Diameter Spaced 0.375” Apart. Contacts: Precision Gold Plated Contacts. Gold-plated contacts can prevent tarnishing and degradation, which can affect the response of the switch. Gold contacts are used for low voltage while tungsten contacts are generally used for higher voltage and current applications. Some Applications have a Diode soldered between the Side and End Terminal. Alternates: Williams SW-1A-114, SW-1A-120-1, Stern 180-5054-00, Capcom SW00127, and others. Applications: Some Data East, Sega, and others. Many applications use two Leaf Switches per slingshot bumper. Note: There are many different size leaf switches. Check dimensions and pictures thoroughly to confirm compatibility for your application. Some customers reportedly disassemble to use the component parts to rebuild other leaf switches or relays. Vintage - New Old Stock – Vintage – Made in USA Learn More

SPDT 2-Position Slide switch Slide is side pc mount.Body: 18.4mm wide x 10.2mm tall

Learn More

UNIMAX Switch, Micro. SPDT Contact Assembly.

For Unimax microswitches.

Contacts: NO & NC.

Note: No Actuator. Actual P/N 01781.

Learn More

TYCO/ALCOSWITCH - 2-1437626-0 - BP1532-0 Hardware, Switch Boot.

Splash-proof seal for pushbutton switches.

15/32-32 thread size.

Use with Series MSPF MPG.

Learn More

Switch, micro pushbutton. Contacts: SPDT. Contact Ratings: 15Amp 125V/250V/480VAC. Actuator: On-On. Connection: screw terminals. Mech: panel. Note: Sensitive action. Learn More

UID - 3-390 Switch, P/B switchbank.

Contacts: 3 - DPDT.

Connection: solder.

Body: Mount flange 2.198" long x 1.024" high.

Note: All interlocking (Push one down and one pops up).

Note: See SKU 4515 for knobs. 

Learn More

TURCK - Bi15-CP40-AN6X2 - Inductive Switch, Proximity.

10-30VDC 200mA 15mm.

3-Wire DC NPN

Ident Nr.: 16220

NIB.

Note: "Combiprox.

Learn More

TYCO/ALCOSWITCH - 2-1437626-1 - BP1532-2 - PB Switch Boots Silicone

Splashproof seals having 1/4-40 blind nuts integrally mounted to the black Neoprene
seal. Supplied with a captive O-Ring to complete the panel seal. Used with actuators up
to .37" long. Choice of two-tone with nickel finish knurled ring or all black.

15/32-32 Threaded Switch

Splash Proof

Seal are REd Color.

Boot Material: Silicon

Hex Nut Material: Brass, Nickel Plated

Alternates: Newark 35AC0335, 6-390, 77B7531

New Old Stock - Rare Difficult Component To Find

Learn More

THERM-O-DISC - 20MAA3FA – Normally Closed Contacts Motor Protecting Temperature Sensor Switch. The Therm-O-Disc line of Motor Protectors offers accurate and reliable protection against hazardous overheating in single phase/single voltage A/C motors. This motor protector employs a snap-acting, current and temperature responsive bimetal disc for proven performance over life. An internal resistance heater utilizes the effects of current to bias the operation of the bimetal disc for added thermal response. A wide range of bimetal and heater combinations are available to cover specific design requirements. This design flexibility and proven performance has made Therm-O-Disc Motor Protectors a popular choice among the leading manufacturers of fractional horsepower motors. The operating mechanism inherent to all Therm-O-Disc Motor Protectors is the snap-action bimetal disc. During abnormal conditions, heat generated by resistance and/or motor ambient causes the bimetal disc to snap at the specified calibration temperature. This allows the circuit to open within the maximum safe limits of the motor windings. Once the motor returns to a normal operating temperature, the bimetal disc resets automatically. This closes the circuit and re-energizes the motor. This same snap-action principle is utilized in millions of Therm-O-Disc products applied in the appliance, heating and air conditioning industries. The Motor Protector features include: • High-speed contact separation ensures long contact life. • Current and temperature responsiveness for excellent design flexibility. The Motor Protector series has been rated by major agencies throughout the world. The agency ratings can be used as a guide when evaluating specific applications. However, the mechanical, electrical, thermal and environmental conditions to which a control may be exposed in an application may differ significantly from agency test conditions. Therefore, the user must not rely solely on agency ratings, but must perform adequate testing of the product to confirm that the control selected will operate as intended in the user’s application. This is an over temperature motor protector which opens its contacts (SPST) when excessive temperature is sensed. Bimetal Resistance: 0.0015 Ohm, Heater Resistance: 0.0320 Ohm Temperature: Opens @ 110 C (230 F), Closes @ 45 C (113 F) Current Rating: 50A @ L.R. 120V, 37 A @ L.R. 240V Dimensions: 1.38" Wide x 1.32" X R2.50 Radius Curved 0.38" Thickness. Weight: 0.5 Ounce (15 Grams) Termination: Two Side Entry 1/4" Quick Connect Terminals. Applications: Commercial, Industrial, and Residential, Including Several Whirlpool, Maytag, Kenmore Dryer as a motor fuse. New Old Stock Made in USA Learn More