Switches
Electrical Power Switches
We carry a wide variety of electrical switches for sale. Our selection consists of rotary and rocker switches, keypads, pressure switches, and more, all available at surplus prices. As an electrical power switch distributor, we constantly update our inventory with the latest and most advanced surplus switches on the market.
If you’re looking for a switch that isn’t in stock, submit a part request. We’ll do everything we can to get that part for you as soon as possible. If you have any other questions about our electrical power switches, don’t hesitate to contact us.
Shop our selection of electrical switches for sale below.
- GE SENSING - AL03006-11.7K-98-G1 - Thermistor. 20K Ohm NTC.
GE SENSING - AL03006-11.7K-98-G1 - Thermistor.
20K Ohm NTC.
Tolerance: 10%.
Material: Glass.
Package: DO-35 Axial Leads.
Rohs Compliant.
Alternates: DKF203*10, DKF203M10
Learn More - General Electric - CR101Y1 - Switch, motor. 16Amp 230V.$65.00Switch, motor. NEMA, Toggle, Starter Type Manual, 16 Amps AC, Max Voltage 230, NEMA Type 1, No of Required Thermals 1, Number of Poles 1, Height 4.16 In, Width 2.28 In, Depth 2.63 In, 1 HP @ 1 Phase - 115V, 1 HP @ 1 Phase - 230V, 1 HP @ 115VDC, 1/4 HP @ 230VDC, Standards UL (508)/ CSA. Learn More
-
Gems Sensors - ELS-1100 138167 - Electro-Optic Sensor, Liquid Level Switch. Package of 2Special Price $149.98 Regular Price $268.95IN STOCK - MORE THAN 100 READY TO SHIP!Gems Sensors - ELS-1100 138167 Electro-Optic Sensor, Liquid Level Switch.
ELS-1100 Series Single-Point Level Switch is a compact, economical, no moving parts polysulfone level sensor with built-in switching electronics. A variety of mountings, power requirements and electrical terminations are available. These level switch units are suitable for high, low or intermediate level detection. Installation is simple and quick through the tank top, bottom or side. The sensor offers ±1 mm repeatability and broad liquid compatibility. They are not recommended for use in any liquid that crystallizes or leaves a solid residue.
General Purpose & Economically Priced
5VDC Supply.
Output: TTL/CMOS Compatible. Open Collector Output May Sink 40 mA UP TO 30 VDC.
Probe Wet-Sink.
Material Construction: Polysulfone or Nylon Housing and Prism
3 Wire, 1/4" NPT Mounting.
Operating Pressure: 0 to 150 PSI
Operating Temperature: 0 F to 176 F
Lead Wires, 22 AWG, PVC Jacketed
EMI Susceptibility: Meets (MIL-STD-461B Part 2 Modified) Specification of 10 V/M for Frequency Range 30 to 1000 MHz
UL Recognized
Additional information: https://www.gemssensors.com/search-products/product-details/els-1100-single-point-level-switch-138167
New - Proudly Made in USA
Package of 2 (Note: Typically sold in singles, but our sale is two Sensors per box at price of 1).
Learn More - E-SWITCH - TL1105LF250Q - Switch, Pushbutton. SPST Normally Open, 0.05A, 50VDC, 2.45M Through Hole.
E-SWITCH - TL1105LF250Q - Switch, Pushbutton.
Contacts: SPST NO.
Contact Ratings: 0.05Amp 12V.
Actuator: Off-Mom.
Connection: 4 Pin.
Mech: PCB Vertical.
Panel hole: 6mm square x 3.8mm above board (plus actuator 9.5mm high).
Note: Tactile.
Model Number: TL1105 Switch
Part Number: TL1105LF250Q
Contact Rating: 50mA@12VDC
Life Expectancy: 100,000 cycles
Contact Resistance: 100mOhm max., typical @ 2-4VDC
Insulation Resistance: 100MOhms min.
Dielectric Strength: 250 VAC
Operating Temperature: -20°C to 70°C
Actuator: 17mm
Operating Force: 250gf
Contact Termination: Silver
Lead free. Rohs compliant.
Learn More - E-SWITCH - EG-2209 - Switch, slide. DPDT 0.1A 12VDC. .$0.69Out of stockSwitch, slide. Contacts: DPDT. Contact Ratings: 0.1Amp 12VDC. Actuator: 2 Position. Connection: 6 Pin (2 x 3). Mech: PCB, vertical. Body: 11.4mm long x 6.5mm wide x 5mm high. Note: Leads are tarnishing. Learn More
- Cutler-Hammer / Eaton - 8822K21 - Switch, toggle. DPST 15A 125V.$19.91Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC. Actuator: On-Off (Ctr). Connection: screw terminals. Mech: panel mount, bushing. Body: 1.338" long x 0.750" wide x 0.757" high plus terminals. Bushing: 3/8" D x 0.480" long. Shaft: 0.650" long. Note: Military double marked MS35059-24, NSN 5930-006362821. Learn More
-
CUTLER-HAMMER - 7611K2 - Switch, toggle. DPDT 15Amp 125VAC.$15.00Switch, toggle. Contacts: DPDT. Contact Ratings: 15Amp 125VAC/10Amp 250VAC (1HP 1-2-3PH 125-480VAC). Connection: solder. Mech: Panel, bushing. Panel hole: 1.837" long x 1.378" wide. Note: Standard 15/32" bushing x 0.462" long. Learn More - Cutler-Hammer / Eaton * - 8880K5 - Switch, toggle. 4PDT 10A 125/250V.$24.00Switch, toggle. Contacts: 4PDT. Contact Ratings: 10Amp. Actuator: 125/250VAC. Connection: 12 screw terminals. Mech: Panel, flange/plate 53.8mm long x 25.8mm wide with 2 holes at 45.5mm centers. Panel hole: Body 36.6mm long x 33.7mm wide x 33.5mm deep behind panel. Note: (3 Position). No actual P/N on unit. Learn More
- Carling Switch - TLGK6A-4C-B-L-A - Switch, rocker. DPST 6A 125V.
Carling Switch - TLGK6A-4C-B-L-A Switch, Rocker.
These AC rated switches are also suitable for low voltage DC applications.
Contacts: DPST.
Contact Ratings: 6Amp 125VAC, 3Amp 250VAC (1/4HP 125-250VAC).
Actuator: Momentary.
Elect config: Solder Terminals.
Mech: Panel.
Body: 34.5mm long x 19.3mm wide x 32.7mm behind panel.
Mount flange: 47.7mm long x 10.1mm wide with 41mm centers.
Learn More - Cherry Electrical Products - E22-90N - Switch, micro, lever. SPDT 3A 125V.
Cherry Electrical Products - E22-90N Switch, micro, lever.
Status: Discontinued Contacts: SPDT.
Contact Ratings: 3Amp 125/250VAC.
Connection: 3/16" male QC terminals.
Mech: Panel. Panel hole: 28.3mm long x 9.9mm wide x 15.8mm high with 24.0mm centers.
Note: Miniature snap-action plastic actuator.
Alternate: E23-50NX
More info: http://www.cherrycorp.com/english/switches/pdf/E21_Series.pdf
Learn More -
C & K Components - MF00L1NZQO - Switch, rotary. Contacts: 1P10T.READY TO SHIP - ONLY 21 LEFT IN STOCK!C & K Components - MF00L1NZQO Switch, Rotary.
Contacts: 1P10T.
Contact Ratings: 125VAC (or 28VDC) 250mA, carry 6Amp.
Contact Material: Silver
Connection: Solder.
Elect config: Non-Shorting.
Mech: PC, Vertical.
Body: Bushing 0.25" D x 0.243" long.
Body: 0.511" D x 0.374" high.
Shaft: Flattened 1/8"D x 0.391" long.
M Series: Half-inch Rotary Switches.
Approvals: CSA, UL RoHS Compliant
Learn More -
C & K Components - 7101TZQE - Switch, toggle. SPDT.$4.99Out of stockSwitch, toggle. Contacts: SPDT. Contact Ratings: 5Amp 120VAC/2Amp 250VAC. Actuator: On-On. Connection: solder terminals. Mech: threaded bushing. Note: Miniature. Learn More - C & K Components - T201MH9ABE - Switch, toggle. DPDT 0.4VA 20V.$10.00Switch, toggle. Contacts: DPDT. Contact Ratings: 0.4VA 20V AC/DC. Actuator: On-On. Mount: PCB RA leads. Dimensions: 8.4mm long (with leads in front and actuator in rear) x 8 1mm wide x 9.2mm high. Unthreaded shaft length: 5.6mm long. Actuator length: 5.5mm long. Note: Miniature. Learn More
- C & K Components - EP11SD1ABE - Switch, pushbutton. SPST NO.Special Price $3.49 Regular Price $4.00
C & K Components - EP11SD1ABE - Switch, Pushbutton.
Contacts: SPST NO.
Contact Ratings: 0.4VA 20V.
Actuator: Off-Mom.
Connection: 2 PC leads.
Mech: PCB RA.
Panel hole: 19.6mm long (including leads and actuator) x 8.2mm wide x 6.2mm above board.
Additional Information: https://www.ckswitches.com/media/1408/ep.pdf
Learn More - C & K Components - E205MD1ABE - Switch, toggle. DPDT.$5.99Switch, toggle. Contacts: DPDT. Contact Ratings: 0.4VA 20V AC/DC. Actuator: Mom-Off-Mom. Mech: PCB RA. Panel hole: Overall with leads and actuator 30.5mm long x 12.8mm wide x 11.6mm high. Note: Lead free. Rohs compliant. Learn More
- C & K Components - E201SD1CBE - Switch, toggle. DPDT 0.4VA 20VAC/DC.$4.99Switch, toggle. Contacts: DPDT. Contact Ratings: 0.4VA 20VAC or DC. Actuator: On-None-On. Mech: PCB, sealed. Body: 0.507" long x 0.454" wide x 0.409" high. Unthreaded bushing 0.258" long. Actuator 0.502" long. Note: Miniature. Nylon case. Made in the USA. Learn More
- C & K Components - E201MD1ABE - Switch, Toggle. DPDT., 0.4A 20 AC/DC.Special Price $5.98 Regular Price $7.50
C & K Components - E201MD1ABE Switch, Toggle.
Contacts: DPDT.
Contact Ratings: 0.4VA 20V AC/DC.
Actuator: On-On.
Mech: PCB Right Angle.
Panel hole: Overall with leads and actuator 30.2mm long x 13.0mm wide x 11.4mm high.
Note: Sealed contacts.
Lead free.
RoHS compliant.
Learn More - C & K Components - E105SD1V61BE - Switch, toggle. SPDT 0.4VA 20VAC/DC.$4.99Switch, toggle. Contacts: SPDT. Contact Ratings: 0.4VA 20VAC or DC. Actuator: Each side Mom. Mech: PCB, sealed. Body: Switch support 0764" long x 0.361" wide x 0.495" high. Note: Miniature. Nylon case. Made in the USA. Learn More
- C & K Components - E101SD1CBE - Switch, toggle. SPDT.$3.99Switch, toggle. Contacts: SPDT. Contact Ratings: 0.4VA 20V AC/DC. Actuator: On-On. Connection: 3 Pin. Mech: PCB RA. Panel hole: 13mm long x 6.6mm wide x 9.4mm high. Unthreaded bushing: 6.4mm long. Note: Sealed contacts. Lead free. Rohs compliant. Learn More
- C & K Components - BD08 - Switch, DIP. Contacts: SPST 8P.
C & K Components - BD08 Switch, DIP.
Contacts: SPST 8P.
Contact Ratings: 25 mA at 25 V, 100 mA at 5 V, 50 V.
Mech: PCB vertical.
Note: Standard profile 16 Dip switch.
Learn More - C & K Components - 7405SYCQE - Switch, toggle. 4PDT 5A 120V.
C & K Components - 7405SYCQE Switch, Toggle.
Series 7000 Miniature Toggle Switch
Contacts: 4PDT.
Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.
Actuator: (On)-Off-(On).
Connection: pc leads.
Mech: PCB.
Panel hole: 12.7mm long x 21.5mm deep x 12.2mm high.
Threaded bushing 9.0mm long.
Actuator 10.2mm long .
Note: Miniature.
Sealed contacts.
Complete with hardware.
Made in the USA.
Learn More - C & K Components - 7301SCWCGI - Switch, toggle. 3PDT 5A 120V.
C & K Components - 7301SCWCGI Switch, toggle.
Series 7000 Miniature Toggle Switch
Contacts: 3PDT.
Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.
Actuator: On-On.
Connection: pc leads.
Mech: PCB. Panel hole: 12.7mm long x 16.8mm deep x 12.3mm high.
Threaded bushing 9.9mm long (including bushing seat).
Actuator 10.2mm long.
Note: Miniature.
Complete with hardware.
Made in the USA.
Learn More - C & K Components - 7205SCWCGI - Switch, Toggle. DPDT 5A 120V.
C & K Components - 7205SCWCGI Switch, Toggle.
Series 7000 Miniature Toggle Switch
Contacts: DPDT.
Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.
Actuator: (On)-Off-(On).
Connection: PC Leads.
Mech: PCB. Body: 12.70mm long x 12.1mm wide x 10.5mm high.
Threaded bushing 9.5mm (including bushing seat).
Actuator 10.0mm long.
Note: Miniature.
Made in the USA.
Learn More - C & K Components - BD09 - Switch, dip. Contacts: SPST 9P.$1.50READY TO SHIP - ONLY 50 LEFT IN STOCK!Switch, dip. Contacts: SPST 9P. Contact Ratings: 25 mA at 25 V, 100 mA at 5 V, 50 V. Mech: PCB vertical. Note: Standard profile 18 Dip switch. Learn More