Switches

C & K Components - 8161-J86-C-G-226 Switch, Illuminated Pushbutton.

Contacts: SPDT.

Contact Ratings: 0.4VA.

Actuator, P/B latching.

Illumination: Green LED on side.

Connection: PCB terminals, Gold Plated.

Mech: Snap-in. Panel hole: 0.5 x 0.75" hole.

Weight: 0.2 oz.

Note: Push On / Push Off 

Snap Action with Frame & LED.

(Note: Outer bezel dimensions: 0.779" (19.7mm) long x 0.620" (15.7mm) wide x 7.1mm high including actuator).

New Old Stock

Learn More

C & K Components - 3-374 - Switch, Rotary.

Contacts: 2P 3 Position.

Contact Ratings: 12Amp 125VAC, 6A 250VAC, 1A 125VDC.

Note: Bushing: 3/8: threaded.

H Series.

Note: The nature of the switch is inherently non-shorting and operates according to the table below. It cannot emulate the identical operation of a 2-wiper, 3-position switch. This design was necessary to achieve the current ratings of the switch. Pair

LeftCenterRight 1-2 Open Open Closed 1-8OpenClosed Open 7-8ClosedOpenOpen 3-4ClosedOpenOpen 4-5OpenClosedOpen 5-6OpenOpenClosed

Similar to R20307RN02Q

Learn More

C & K Components - 7207KC Switch, toggle.

Contacts: DPDT. Series 7000

Contact Ratings: 120VAC 5Amp (0.4VA).

Actuator: 3 Position, Pull to switch. On-Off-Momentary.

Each side On can be locked into place.

Mech: PCB, 6 pin.

Note: Miniature.

Threaded Bushing length 0.377".

Actuator length: 0.581".

Additional Information: https://www.ckswitches.com/media/1394/7000toggle.pdf

Learn More

C & K Components - 7201SYCGE - Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.

Actuator: On-On.

Connection: PC leads.

Mech: PCB.

Panel hole: 0.502" long x 0.453" wide x 0.377" high.

Threaded bushing 0.350" long.

Actuator 0.412" long.

Note: Miniature. Hardware required, not included.

Made in the USA.

Learn More

TE Connectivity AMP INC - 435116-7 Switch, Dip, 7000 Series.

Actuator Material: Thermoplastic

Contact Material: Copper

Contact Plating: Gold

Housing Color: Black

Housing Material: Polyester

Mount: Through Hole

Contact Current Rating: 1.5 A

Contact Resistance: 50 mΩ

Max Current Rating: 100 mA

 Operating Temperature: -55 °C to 105 °C

Number of Positions: 10

Orientation: Straight

Termination: PC Pins

Throw Configuration: SPST

Voltage Rating (DC): 50 V

Dimensions: Actuator Length 1.27 mm, Height 7.366 mm

Lead Length; 3.556 mm

Length; 27.43 mm

Pitch: 2.54 mm

Mech: PCB 20 Pin.

New Old Stock

Alternate: Newark 96Y1856

Learn More

TE Connectivity AMP INC - 1-435704-0 Programmable DIP Shunt.

Status: Discontinued

Contacts: 10Position (20 Pin).

Contact Ratings: 2 Amp

Dielectric Withstanding Voltage (V) = 500.

Mech: PCB 20 Pin.

Note: Series 7600.

Centerline: 2.54mm.

Dimensions: Centerline: 2.54mm  7.62 (0.1200" X 0.300")

New Old Stock

More info: http://www.tycoelectronics.com/catalog/products/en?q=1-435704-0

Learn More

ALLEN BRADLEY - AB - 871TM-D5NP18-N4 - AB871TMD5NP18N4 Inductive Proximity Sensor

Bulletin 871TM tubular stainless steel sensors are ideal for harsh or extremely demanding environments. These sensors resist impact, abrasion and corrosion to keep things moving where ordinary sensors grind to a halt. This line features full mechanical seals at all barrel openings and full epoxy encapsulation for optimal performance in the toughest environments.

Size 18mm Diameter

Environmental Conditions - 30 g with 11 ms Shock, 55 Hz 1 mm 3-Planes Vibration

Input: 10-30VDC.

Load: 200mA.

Temperature Rating  -13 to 158

Output: Shielded NO.

Sensing distance: 5mm.

Has a 4 pin DC Micro Quick-Disconnect

Series A.

Listed: UL/CSA.

Learn More

ALLEN BRADLEY - AB - 800MR-N31QB - Switch, Key. Contacts: 4 Position. 300 VAC 10A, NEW The ALLEN BRADLEY 800MR-N31QB Key Switch is a high-quality, 4-position rotary switch designed for heavy-duty applications. With a current rating of 1-15A and suitable for interior use, this switch features a lock cylinder and keys for added security. It is suitable for various industries such as healthcare, electronics, telecommunications, and more. The switch is designed for panel mounting, has 2 NO and 2 NC contact configurations, and is made by the trusted brand Allen Bradley in the United States. Ideal for controlling electrical circuits and ensuring safety in various settings. Allen Bradley is now Rockwell International Status: Discontinued Heavy Duty Selectro Switch with Lock Cylinder and Keys Contacts: 4 Position. 2 N.C. & 2 N.O. Termination Type: Stab Termination Rating: 300 VAC, 10 Amps Max. Key Codes: Standard T100 Note: Selector switch, round cylinder lock, key maintained. Non-illuminated. Bulletin 800, series C OOXO, OOOX, OXOO, XOOO. Key is removable only in locked position. Hole Diameter: 22.5 mm Operator function code: 31 Operator Cam Type: Q cam Operator mechanical design life (cycles, min.): 200000 Contact block mounting style: Latch cartridge Contactor cart position: Both left and right Illumination module termination tightening torque : 0.7...0.9 N.m (6...8 lb in) Operator type:4-position selector switch Enclosure Compatibility: Type 13, IEC I44 IP65 oiltight Contact Block Durability: 750000 (Standard Contact), 200000 (logic Reed) Key lock – code: Standard key (or no key for knob style selector switches) Operator Function: Maintained locking position 1 standard key Shock: 100 G Vibration: 10 G Contact block termination wire range Accepts two 2.79 x 0.81 mm (0.110 x 0.032 in) push-on connectors or one 6.35 x 0.81 mm (0.250 x 0.032 in) push-on connector (stab) UPC 662073280231 Made in USA In Manufacturer’s Packaging with Instructions Additional Information: https://support.rockwellautomation.com/cc/okcsFattachCustom/get/459604_9 Learn More

TE Connectivity / Alco Switch - MPE106F

Switch, Pushbutton.

Contacts: SPDT. Solder

Contact Ratings: 6Amp 125VAC, 3Amp 250VSC.

Actuator: Momentary. Plunger

Mech: PCB, solder terminals.

Dimensions: 0.518" long x 0.30" wide x 0.466" high. (13 x 11.94mm) 

Threaded Bushing 0.30" long plus round seat 0.472" D x 0.230" high.

Note: Miniature. No knob or switch cap.

Alternate: 4-1437567-3

Learn More

Switch, rotary. Contacts: 3 Position. One side momentary. Contact Ratings: 300VAC max. Mech: panel mount. Note: Series A, selector switch, non-illuminated. Double marked 800M-XA. Learn More

TYCO - 6-1437576-8 - ALCO - MSS4200EG Switch, Slide. 4PDT. Contact Ratings: 20VDC 0.4VA, 125 VAC .3A

Connection: 12 PC leads.

Voltage Rating: 125 AC, 300mA

Mech: PCB, Miniature with Epoxy Sealed Terminals.

Contacts: Gold Make-Before-Break 

Operating Temp.: -20C to 85C

Mechanical/Electrical Life: 15,000 Cycles 

PC-mount gold leads telecom grade pin spacing the 6 pin spacing. See Diagram. 

The unit can be PCB mounted with 4 indexing pins of 12.6mm x 8.3mm on center to keep it in fixed on the board.

 

Learn More

ALPS - SPH122A50 Switch, Pushbutton. PCB Tictile Pushbutton.

Contacts: DPDT.

Actuator: Momentary.

Mech: 6 Pin PCB.

Note: Keyboard switch, no knob.

Package of 10.

Learn More

Cutler-Hammer / Eaton - 10172H- 10172H 334A - Thermal Overload Switch

Status: Discontinued

Pilot Duty Ratings: 115-230 VAC, 30A

Body Approximate Overall Dimensions: 2.2" x 1.95" X 1.0"

New Old Stock - This Item has no Shelf Life

NSN 5925-00-783-5581

Made in USA

Learn More

VIO - 247432 - 8159K40P0021 - Switch, Slide. Contacts: DPDT.

DPDT (signifying double-pole, double throw) slide switches have 6 contacts lined up in two length-wise groups of three.Each group of three, commonly referred to as a "pole" has a center tab that operates as the connection to the wiper that connects to one or the other of the two ends when the upper slide handle is at one or the other end of physical travel. The two slider work in unision, so that the two poles exchange contacts together. 

High Quality, High Reliability Smooth Action Slide Switch

Mech: 6 PCB or Solder Terminals

Mounting with 1-1/8" Mounting Center (28.7mm).

Approximate Dimensions: 35mm long x 13.5mm wide.

Mounting: Mounting Ears and/or PCB

Appears to be Gold plated lugs and contacts.

Excess inventory from Bailey Controls project.

 

Learn More

OSLO Switch - RTP1A9C9 - Rocker Switch, SPST, 2 Position.

20AMP-125VAC 15AMP-250VAC, 3/4 HP 125/250 VAC

Color: Black, Gloss

Contact Ratings: 16Amp 125VAC/10Amp 250VAC.

Connection: 0.25" Quick Connect or Solder Terminals.

Mech: Panel Mount, Snap-In.

Contacts: Fine Silver for Long Life Dependability.

Dielectric Strength: 1250 volts (live parts to ground).

Electrical Life: 35,000 operations at maximum rating.

Mechanical Life: 100,000 Mechanical Operations.

Insulation resistance: 5 megohms.

UL Listed, CSA Approved.

Proudly Made in USA

 

Learn More

OSLO Switch - SPA1A - Switch, Square Pushbutton.

Alternating Action

SPST, Panel

Single Pole, Single Throw

On-Off, Maintained

10 Amps

125/250 VAC

1/4 HP, 125 VAC

10 Amps at 14 VDC

.250" Quick Connect Terminals (2)

Red Opaque Cap

Black Housing

UL Recognized, CSA Certified, VDE Approved

Proudly Made in USA

 

Learn More

TEC-LITE INC - MBS-S-1823A-1  - Switch, Pushbutton.

The MBS Series is a compact, highly reliable momentary push-button switch designed to conserve panel space
on computers, data processing, industrial control and missile guidance systems. The MBS Series mounts in a 3/8” hole on 9/16” centers with only a 1” projection behind the panel.

Transistor Electronics Corporation (TEC)

Contacts: Normally Open, Normally ClosedMomentary

Actuator: Illuminated.

Mechanical Mount: Panel Mount, Threaded Bushing.

Temperature Range: -40 C to 60 C

Contact Rating: 100 mA @115 VAC, Non-Inductive

Contact Terminals: Brass with Gold Finish.

Body Material: Aluminum with Anodized Finish

Body Dimensions: 0.50" Diameter X Mounts in a 0.375' hole

Projects 0.875" Back of Panel.

Gold Plated contacts exceed 500,000 Operations @100 mA Current Rating.

Note: White Lens with "C" Legend.

Made in USA

Genuine Vintage Tec-Lite - New Old Stock

Learn More

Licon 01‑865110 Switch, Pushbutton.

Contacts: SPDT  

Contact Ratings: 10Amp 125/250VAC.

Actuator: Illuminated, Latching.

Mech: Panel.

Note: No lamp (30V Max.).

Dimensions: Full Size: Width: 1.35", Height: 2.5", Depth: 1.25"

Genuine Licon - New Old Stock

Note: Bulbs and covers are ordered separately and not part of the P/N.

Learn More

Eaton -Arrow Hart - AH7810-UD - Motor Controller, Manual Contactor

Industrial Grade Manual Motor Controllers

Phase: 3 Phase

Poles: 3 Pole

Amperage: 30 Amps

Voltage: 600 VAC

Termination Style: Front Wired Screw

Max. AWG Wire Size: 10 AWG

HP Rating: 7.5@240VAC, 15@480VAC, 15@60VAC  

Dimensions: Height 1.7" X Width 3.7" X Diameter 2.6"

Positive-contact design enhances fast-make/slow-break

Silver-alloy contacts for maximum conductivity and service life

Back and side wire terminals accept up to #10 AWG solid copper wire. For stranded #8 AWG wire, remove terminal clamp and use ring terminal

Oversized #10 triple-combination terminal screws are vibration resistant

All molded parts are thermoplastic to resist impacts, chemicals, temperature, tracking and arcing

Insulating barrier between terminals provide isolation from each phase

Nickel-plated brass mounting yoke for superior corrosion resistance

Large toggle provides positive actuation, even with gloved hand.

Note: Arrow Hart P/N 7810-UD changed to AH7810UD following acquisition by Eaton. 

High Quality Commercial - New Old Stock.

UL Class: UL508

Proudly Made in USA

Learn More

MSTO1AH MANUAL TOGGLE MOTOR STARTER, 1 POLE, 1HP WITH Crouse Hinds ENCLOSURE

Learn More

WARMINSTER - CW Industies - GF-861-0002G - Switch, slide.

Contacts: 3PDT.

Contact Ratings: 3Amp 125VAC, 125VDC.

Mech: PCB 6 solder leads, with 1.101" mt ctrs (27.9mm).

Body: 35.9mm long x 18.2mm wide.

New Old Stock

Learn More

Switch, dip. 3P, marked with a decimal point, 1, 2. Actuator: raised slide. Mount: PCB. Package: 12 Dip.

Learn More

ALPS/Samwon Electric - PL421 - Switch, Pushbutton.

4PDT Latching.

Mount: PCB.

Total length of switch with 1/2" shaft is 1 5/16" x 5/16 wide x 9/16" high which includes the 3/16" long connections.

Package of 5.

Learn More

Unidentified MFG - TCO-D085 PRGR 87C - Thermal Cut-outs, Axial Leads

Thermal Cut-offs (also known as Thermal Fuses) are miniature, NON-RESETTABLE temperature sensitive devices designed to prevent appliances and electronic equipment from overheating. Thermal cutoffs are UL and CSA listed. Literally thousands of different applications have been devised for thermal-cutoffs, thus providing a large replacement market. Such applications include: Hair Dryers Refrigerators Battery Chargers Irons Hot Plates Glue Guns Electric Motors Window Fans Coffee Makers Microwave Ovens Popcorn Poppers Dishwashers And hundreds of others The TCO (Thermal Cut-Off) responds to temperature by interrupting an electrical circuit when the operating and/or environmental temperature exceeds the thermal rating of the device. This is accomplished when the internal organic pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit.

Trip Open Temperature: 87C / 188F

Maximum Current Rating: 15 Amps

Typical Opening Temperature Tolerance: +0°C, –4°C

18 Gauge Solid Copper Wire

Full 1 1/3” leads to fit all replacement configurations

Note 1: Temperature sensitive devices. Do not store above +48°C (+120°F).

Note 2: Color Band does not denote temperature group.

Note 3: The electrical resistance of the thermal cut–off is comparable to that found in an equal length of 18 gauge solid copper wire. With proper air flow, heat generation below 15 Amps is minimal, above 15Amps the upper limit on the currentcapacity will depend on the environment for each specific application.

Note 4: A general rule of thumb for continuous operating temperature for thermal cut–offs is 30°C less than the Maximum Opening Temperature.

TCO-D085 PRGR 87 C.

Alternate: NTE 8085

 

Learn More